iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14632:1998

(Main)

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998)

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998)

This standard specifies the requirements and test methods for solid flat extruded sheets of polyethylene - homopolymers (PE-HD) without filler and reinforcing material. This standard applies only to thickness 0.5 mm to 40 mm. This standard also applies to PE - HD sheet in rolled form.

Extrudierte Tafeln aus Polyethylen (PE-HD) - Anforderungen und Prüfverfahren (ISO 14632:1998)

Diese Norm legt die Anforderungen und Prüfverfahren für massive ebene extrudierte Tafeln aus Polyethylen - Homopolymerisaten (PE - HD) ohne Füll- und Verstärkungsstoff fest. Diese Norm gilt nur für Tafeldicken von 0,5 mm bis 40,0 mm. Diese Norm gilt auch für gerollte PE - HD Tafeln.

Plaques extrudées en polyéthylène (PE-HD) - Prescriptions et méthodes d'essai (ISO 14632:1998)

La présente norme définit les prescriptions et les méthodes d'essai pour des plaques massives et planes, extrudées en homopolymères de polyéthylène (PE- HD) sans adjonction de charges ou de renforts. Cette norme s'applique exclusivement aux plaques d'épaisseur 0,5mm à 40mm. Cette norme s'applique également aux feuilles de PE- HD en bobines.

Ekstrudirane plošče iz polietilena (PE-HD) - Zahteve in preskusne metode (ISO 14632:1998)

General Information

Status
Withdrawn
Publication Date
14-Dec-1998
Withdrawal Date
01-Jun-2021
ICS
83.140 - Rubber and plastics products
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/SC 6 - Thermoplastic films, foils and sheets
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Jun-2021
Ref Project
SIST EN ISO 14632:2000 - Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998)

Relations

Replaced By
EN ISO 14632:2021 - Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 14632:2000EN ISO 14632:2000
PreviousNext
Standard
EN ISO 14632:2000
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2000
(NVWUXGLUDQHSORãþHL]SROLHWLOHQD 3(+' =DKWHYHLQSUHVNXVQHPHWRGH ,62

Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO
14632:1998)
Extrudierte Tafeln aus Polyethylen (PE-HD) - Anforderungen und Prüfverfahren (ISO
14632:1998)
Plaques extrudées en polyéthylene (PE-HD) - Prescriptions et méthodes d'essai (ISO
14632:1998)
Ta slovenski standard je istoveten z: EN ISO 14632:1998
ICS:
83.140.10 Filmi in folije Films and sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2556:2000(Main)
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974)
SIST EN ISO 2556:2001

Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of known initial volume has the air pumped out until the pressure is practically zero. The quantity of gas which passes through the specimen from one chamber to the other is determined as a function of time by measuring the increase in pressure occuring in the second chamber by means of a manometer.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1401:2016(Main)
Rubber hoses for agricultural spraying (ISO 1401:2016)
SIST EN ISO 1401:2017

ISO 1401:2016 specifies requirements for three types of flexible rubber hose for pressure spraying of agricultural chemicals and/or fertilizer products within a temperature range of ?10 °C to +60 °C.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14294:2010(Main)
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
SIST EN 14294:2010

This European Standard specifies procedures for the preparation of test pieces comprising adhesive coated leather or other footwear upper material onto which a soling material is moulded directly. The procedures described simulate direct vulcanising of rubber, injection moulding of thermoplastics and reaction moulding of polyurethane.
The prepared test pieces are suitable for the test procedures described in EN 1392, to meet the requirements of EN 15307.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1847:2009(Main)
Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water
SIST EN 1847:2010

This European Standard specifies a method of exposing test specimens of plastic and rubber sheets for roofing, free from all external restraint, to liquid chemicals (including water), and methods for determining the changes in properties resulting from such exposure.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2556:2000(Main)
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974)
SIST EN ISO 2556:2001

Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of known initial volume has the air pumped out until the pressure is practically zero. The quantity of gas which passes through the specimen from one chamber to the other is determined as a function of time by measuring the increase in pressure occuring in the second chamber by means of a manometer.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7854:1997(Main)
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995)
SIST EN ISO 7854:1999

Describes the De Mattia method, Schildknecht method and crumple/flex method for the assessment of the resistance of coated fabrics to damage by repeated flexing. Cancels and replaces the first edition, which has been technically revised.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17948:2024(Main)
Maintenance management and functions
kSIST FprEN 17948:2024

This document specifies the main content of maintenance management and the main activities for which maintenance management is responsible.
This document is applicable to maintenance managers and asset managers in the industry sector and for infrastructure and buildings in order to achieve the success factors of the organization.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
kSIST FprEN 556-2:2024

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day