iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 5923:2012

(Main)

Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO 5923:2012)

Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO 5923:2012)

ISO 5923:2012 specifies requirements for carbon dioxide for use as a fire extinguishing medium.

Ausrüstung für Brandschutz und Brandbekämpfung - Löschmittel - Kohlenstoffdioxid (ISO 5923:2012)

Diese Internationale Norm legt Anforderungen an Kohlenstoffdioxid zur Verwendung als Feuerlöschmittel fest.

Équipement de protection et de lutte contre l'incendie - Agents extincteurs - Dioxyde de carbone (ISO 5923:2012)

L'ISO 5923:2012 spécifie les exigences relatives au dioxyde de carbone lorsqu'il est destiné à être utilisé comme agent extincteur.

Oprema za požarno zaščito in gašenje - Gasila - Ogljikov dioksid (ISO 5923:2012)

Ta mednarodni standard določa zahteve za uporabo ogljikovega dioksida kot sredstva za gašenje požara.

General Information

Status
Withdrawn
Publication Date
14-Aug-2012
Withdrawal Date
08-Oct-2018
ICS
13.220.10 - Fire-fighting
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191 - Fixed firefighting systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Oct-2018
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN ISO 5923:2013 - Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO 5923:2012)

Relations

Replaces
EN 25923:1993 - Fire protection - Fire extinguishing media - Carbon dioxide (ISO 5923:1989)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 5923:2013EN ISO 5923:2013
PreviousNext
Standard
EN ISO 5923:2013
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5923:2013
01-januar-2013
1DGRPHãþD
SIST EN 25923:1997
2SUHPD]DSRåDUQR]DãþLWRLQJDãHQMH*DVLOD2JOMLNRYGLRNVLG ,62
Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide
(ISO 5923:2012)
Einführendes Element - Haupt-Element - Ergänzendes Element (ISO 5923:2012)
Équipement de protection et de lutte contre l'incendie - Agents extincteurs - Dioxyde de
carbone (ISO 5923:2012)
Ta slovenski standard je istoveten z: EN ISO 5923:2012
ICS:
13.220.10 Gašenje požara Fire-fighting
13.220.20 3RåDUQD]DãþLWD Fire protection
SIST EN ISO 5923:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5923:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 5923:2013


EUROPEAN STANDARD
EN ISO 5923

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2012
ICS 13.220.10 Supersedes EN 25923:1993
English Version
Equipment for fire protection and fire fighting - Fire extinguishing
media - Carbon dioxide (ISO 5923:2012)
Équipement de protection et de lutte contre l'incendie - Ausrüstung für Brandschutz und Brandbekämpfung -
Agents extincteurs - Dioxyde de carbone (ISO 5923:2012) Löschmittel - Kohlenstoffdioxid (ISO 5923:2012)
This European Standard was approved by CEN on 14 August 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5923:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5923:2013
EN ISO 5923:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 5923:2013
EN ISO 5923:2012 (E)
Foreword
This document (EN ISO 5923:2012) has been prepared by Technical Committee ISO/TC 21 "Equipment for
fire protection and fire fighting" in collaboration with Technical Committee CEN/TC 191 “Fixed firefighting
systems” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn
at the latest by February 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 25923:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5923:2012 has been approved by CEN as a EN ISO 5923:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 5923:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 5923:2013
INTERNATIONAL ISO
STANDARD 5923
Third edition
2012-08-15
Equipment for fire protection and fire
fighting — Fire extinguishing media —
Carbon dioxide
Équipement de pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21805:2023(Main)
Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO 21805:2023)
SIST EN ISO 21805:2023

This document gives guidelines for fulfilling the requirements contained in ISO 6183:2022, 6.4.1 and 7.4.1 and ISO 14520‑1:2023, 5.2.1 h) and 5.3 h), in respect to over- and under-pressurization venting and post-discharge extract.
It considers the design, selection and installation of vents to safeguard the structural integrity of enclosures protected by fixed gaseous extinguishing systems and the post-discharge venting provisions where used.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-3:2018(Main)
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-3:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams, and for application at low expansion to water-miscible liquids.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-1:2018(Main)
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-1:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of medium expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or high expansion foams.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-4:2018(Main)
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
SIST EN 1568-4:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-miscible liquids. Requirements are also specified for marking.
IMPORTANT - The fire performance is tested using acetone and isopropanol as the fuel, which also forms the basis for the performance classification. However, there are a large number of water-miscible liquids which have more or less different properties to acetone and isopropanol. It has been shown by tests using other fuels that the performance of various foams can differ considerably. Examples of such fuel is Methyl Ethyl Ketone (MEK). It is therefore essential that the user checks for any unfavourable or unacceptable loss of efficiency when the foam is used against fires in any other water-miscible fuels than acetone and isopropanol respectively. The fire test conditions and procedure given in H.2 can be used in order to achieve results comparative with acetone and isopropanol respectively and related requirements.
It is also essential for the user to note that other fuel depths and methods of application than those specified in H.2 can cause considerable loss of efficiency and these matters should be carefully considered by the user when assessing the suitability for particular applications.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
NOTE   Some concentrates conforming to this part of the EN 1568 series can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-2:2018(Main)
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-2:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of high expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or medium expansion foams.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-2:2012(Main)
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
SIST EN 671-2:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with lay-flat hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
Furthermore, it provides also for requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-1:2012(Main)
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
SIST EN 671-1:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
It also provides requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases.
This European Standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 615:2009(Main)
Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
SIST EN 615:2009

This European Standard is applicable to fire extinguishing powders for fire classes A, B and C. It specifies, by means of defined test methods, minimum requirements for the chemical and physical properties and minimum extinguishing capabilities. Requirements are also specified for the information and data to be given by the supplier.
This European Standard is not applicable to powders for class D fires.
NOTE 1   The classification of fires is given in EN 2 [1].
NOTE 2   Some countries have national standards for class D powders.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-3:2009(Main)
Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
SIST EN 671-3:2009

This European Standard specifies requirements for inspection and maintenance of hose reels and hose systems such that they continue to provide the service for which they were manufactured, supplied or installed i.e. to ensure a first emergency intervention to fight a fire before more powerful means can be implemented.
This European Standard is applicable to hose reel and hose system installations in all types of buildings irrespective of the nature of use of the buildings.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12094-7:2000(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
SIST EN 12094-7:2001

This European Standard specifies requirements and test methods for nozzles which introduce the extinguishing agent into a CO 2 protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. The
extinguishing agent normally arrives at the nozzle in two-phase flow form (liquid-gaseous mixture). It expands into the protected volume to form a gas or a gas-and-dry-ice mixture depending on the nozzle type. This standard should only be used as guidance for testing nozzles which work on different principles.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day