Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)

This document specifies methods for identifying fire hazards resulting from machinery and for performing a risk assessment.
It gives the basic concepts and methodology of protective measures for fire prevention and protection to be taken during the design and construction of machinery. The measures consider the intended use and reasonably foreseeable misuse of the machine.
It provides guidelines for consideration in reducing the risk of machinery fires to acceptable levels through machine design, risk assessment and operator instructions.
This document is not applicable to:
—          mobile machinery;
—          machinery designed to contain controlled combustion processes (e.g. internal combustion engines, furnaces), unless these processes can constitute the ignition source of a fire in other parts of the machinery or outside of this;
—          machinery used in potentially explosive atmospheres and explosion prevention and protection; and
—          fire detection and suppression systems that are integrated in building fire safety systems.
It is also not applicable to machinery or machinery components manufactured before the date of its publication.

Sicherheit von Maschinen - Vorbeugender und abwehrender Brandschutz (ISO 19353:2019)

Dieses Dokument legt Methoden zum Erkennen der von der Maschine ausgehenden Brandgefahr sowie Methoden zur Durchführung der Risikobeurteilung fest.
Dieses Dokument legt die grundlegenden Begriffe und Methoden von Brandschutzmaßnahmen fest, die für die Konstruktion und Fertigung von Maschinen erforderlich sind. Die Maßnahmen berücksichtigen die bestimmungsgemäße Verwendung und vernünftigerweise vorhersehbare Fehlanwendung der Maschine.
Dieses Dokument bietet zu berücksichtigende Richtlinien zur Reduzierung des Brandrisikos von Maschinen auf ein akzeptables Maß durch die Maschinengestaltung, die Risikobeurteilung und Anweisungen für Bedien¬personen.
Dieses Dokument gilt nicht für:
—   ortsveränderliche Maschinen;
—   Maschinen für kontrollierte Verbrennungsprozesse (z. B. Verbrennungsmotoren, Öfen), es sei denn, dass diese Prozesse die Zündquelle für einen Brand in anderen Teilen der Maschine oder außerhalb derselben sein können;
—   Maschinen, die in explosionsgefährdeten Bereichen eingesetzt werden sowie den Explosionsschutz; und
—   Brandmelde- und Löschanlagen, die in die Brandschutzsysteme von Gebäuden integriert sind.
Dieses Dokument gilt nicht für Maschinen oder deren Bauteile, die vor der Veröffentlichung des Dokumentes hergestellt wurden.

Sécurité des machines - Prévention et protection contre l'incendie (ISO 19353:2019)

Le présent document spécifie les méthodes d'identification du danger d'incendie provenant des machines ainsi que les méthodes permettant de réaliser une appréciation du risque.
Elle donne les concepts de base et la méthodologie des mesures de protection à prendre pour la prévention et la protection contre l'incendie lors de la conception et de la construction des machines. Les mesures prennent en compte l'utilisation prévue et le mauvais usage raisonnablement prévisible de la machine.
Elle fournit des lignes directrices à prendre en compte pour réduire le risque d'incendie des machines à des niveaux acceptables par la conception des machines, l'appréciation du risque et des instructions pour les opérateurs.
Le présent document ne s'applique pas aux:
—          machines mobiles;
—          machines conçues pour maîtriser des procédés de combustion contrôlée (par exemple moteurs à combustion interne, fours), à moins que ces procédés ne puissent constituer une source d'allumage d'un incendie dans d'autres parties de la machine ou en dehors de celle-ci;
—          machines utilisées dans des atmosphères explosibles et à la prévention et la protection contre l'explosion; et
—          systèmes de détection et de lutte contre l'incendie intégrés aux systèmes de sécurité d'incendie des immeubles.
Elle ne s'applique pas non plus aux machines ou composants de machine fabriqués avant sa date de publication.

Varnost strojev - Požarna varnost (ISO 19353:2019)

Ta dokument določa metode za prepoznavanje požarne ogroženosti zaradi strojev in za oceno tveganja.
Podaja osnovne koncepte in metodologijo zaščitnih ukrepov za preprečevanje požara ter zaščito pred požarom,
ki jih treba izvesti med načrtovanjem in izdelavo strojev. Ukrepi upoštevajo namen uporabe in pričakovano nepravilno uporabo stroja.
Podaja smernice, ki jih je treba upoštevati za zmanjšanje nevarnosti nastanka požarov pri strojih na sprejemljivo raven,
in sicer na podlagi zasnove strojev, ocene tveganja in navodil za uporabo.
Ta dokument se ne uporablja za:
– mobilne stroje;
– stroje, ki so zasnovani tako, da vključujejo nadzorovane procese zgorevanja (npr. motorji z notranjim izgorevanjem,
peči), razen če lahko ti procesi delujejo kot vir vžiga požara pri drugih delih
stroja ali zunaj njega;
– stroje, ki se uporabljajo v potencialno eksplozivnem okolju ter za preprečevanje in zaščito pred eksplozijami; in
– sisteme za odkrivanje in gašenje požarov, ki so vgrajeni v sisteme požarne varnosti stavb.
Prav tako se ne uporablja za stroje ali sestavne dele strojev, ki so bili izdelani, preden je bil
objavljen.

General Information

Status
Published
Publication Date
26-Feb-2019
Withdrawal Date
30-Aug-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Feb-2019
Completion Date
27-Feb-2019

Relations

Buy Standard

Standard
EN ISO 19353:2019
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 19353:2016/oprA1:2018
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19353:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 19353:2016
Varnost strojev - Požarna varnost (ISO 19353:2019)
Safety of machinery - Fire prevention and fire protection (ISO 19353:2098)
Sicherheit von Maschinen - Vorbeugender und abwehrender Brandschutz (ISO
19353:2019)
Sécurité des machines - Prévention et protection contre l'incendie (ISO 19353:2019)
Ta slovenski standard je istoveten z: EN ISO 19353:2019
ICS:
13.110 Varnost strojev Safety of machinery
13.220.01 Varstvo pred požarom na Protection against fire in
splošno general
SIST EN ISO 19353:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19353:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 19353:2019


EN ISO 19353
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2019
EUROPÄISCHE NORM
ICS 13.110 Supersedes EN ISO 19353:2016
English Version

Safety of machinery - Fire prevention and fire protection
(ISO 19353:2019)
Sécurité des machines - Prévention et protection Sicherheit von Maschinen - Vorbeugender und
contre l'incendie (ISO 19353:2019) abwehrender Brandschutz (ISO 19353:2019)
This European Standard was approved by CEN on 21 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19353:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19353:2019
EN ISO 19353:2019 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 19353:2019
EN ISO 19353:2019 (E)
European foreword
This document (EN ISO 19353:2019) has been prepared by Technical Committee ISO/TC 199 "Safety of
machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19353:2016.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19353:2019 has been a
...

SLOVENSKI STANDARD
SIST EN ISO 19353:2016/oprA1:2018
01-februar-2018
Varnost strojev - Požarna varnost - Dopolnilo 1 (ISO 19353:2016/DAmd 1:2017)
Safety of machinery - Fire prevention and fire protection - Amendment 1 (ISO
19353:2016/DAmd 1:2017)
Sicherheit von Maschinen - Vorbeugender und abwehrender Brandschutz - Änderung 1
(ISO 19353:2016/DAmd 1:2017)
Sécurité des machines - Prévention et protection contre l'incendie - Amendement 1 (ISO
19353:2016/DAmd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 19353:2016/prA1
ICS:
13.110 Varnost strojev Safety of machinery
13.220.01 Varstvo pred požarom na Protection against fire in
splošno general
SIST EN ISO 19353:2016/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19353:2016/oprA1:2018

---------------------- Page: 2 ----------------------
SIST EN ISO 19353:2016/oprA1:2018
DRAFT AMENDMENT
ISO 19353:2015/DAM 1
ISO/TC 199 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-11-14 2018-02-06
Safety of machinery — Fire prevention and fire protection
AMENDMENT 1
Sécurité des machines — Prévention et protection contre l'incendie
AMENDEMENT 1
ICS: 13.110
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 19353:2015/DAM 1:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
SIST EN ISO 19353:2016/oprA1:2018
ISO 19353:2015/DAM 1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
SIST EN ISO 19353:2016/oprA1:2018
ISO 19353:2015/DAM 1:2017(E)
Contents Page
Foreword . iv
1 Modification to Contents .1
2 Modification to Introduction .1
3 Modification to 4.4.2
4 Modification to 5.1.2
5 Modification to 5.6.4.2 .2
6 Modification to 5.6.3 .2
7 Modification to 6.1.3 .2
8 Modification to Annex A .3
9 Modification to Annex B .4
10 Modification to Annex D . 17
11 Modification to Annex E. 19
12 Modification to the Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.