EN 1726-1:1998/A1:2003

Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N - Part 1: General requirements

To add 1.7 (new)
1.7  This European Standard applies to trucks put on the market after the date of its publication.

Sicherheit von Flurförderzeugen - Motorkraftbetriebene Flurförderzeuge bis einschließlich 10000 kg Tragfähigkeit und Schlepper bis einschließlich 20000 N Zugkraft - Teil 1: Allgemeine Anforderungen

1.7 Diese Änderung 1 gilt für Flurförderzeuge, die nach der Veröffentlichung dieser Ergänzung in Verkehr gebracht wurden.

Sécurité des chariots de manutention - Chariots automoteurs dont la capacité n'excède pas 10000 kg et tracteurs dont l'effort au crochet est inférieur ou égal à 20000 N - Partie 1 : Prescriptions générales - Amendement 1: Systèmes de retenue de l'opérateur - Spécification et procédure d'essai

1.7 (nouveau)
(À ajouter) « Le présent amendement s'applique aux chariots placés sur le marché après la date de publication ».

Varnost vozil za talni transport - Samognana vozila z nosilnostjo do vključno 10.000 kg in vlečna vozila z vlečno silo do vključno 20.000 N - 1. del: Splošne zahteve

General Information

• Status: Withdrawn
• Publication Date: 09-Dec-2003
• Withdrawal Date: 21-Aug-2012
• ICS: 53.060 - Industrial trucks
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150/WG 6 - Self-propelled trucks not exceeding 10 t capacity
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Aug-2012
• Completion Date: 22-Aug-2012
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 1726-1:1999/A1:2004 - Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N - Part 1: General requirements

Relations

• Replaced By: EN ISO 3691-3:2016 - Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (ISO 3691-3:2016)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 3691-1:2012 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011)
• Effective Date: 08-Jun-2022
• Amends: EN 1726-1:1998 - Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements
• Effective Date: 08-Jun-2022
• Revised: prEN ISO 3691-4 - Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO/DIS 3691-4:2006)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1726-1:1999/A1:2004
01-junij-2004
9DUQRVWYR]LO]DWDOQLWUDQVSRUW6DPRJQDQDYR]LOD]QRVLOQRVWMRGRYNOMXþQR
NJLQYOHþQDYR]LOD]YOHþQRVLORGRYNOMXþQR1GHO6SORãQH
]DKWHYH
Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity
and industrial tractors with a drawbar pull up to and including 20000 N - Part 1: General
requirements
Sicherheit von Flurförderzeugen - Motorkraftbetriebene Flurförderzeuge bis
einschließlich 10000 kg Tragfähigkeit und Schlepper bis einschließlich 20000 N Zugkraft
- Teil 1: Allgemeine Anforderungen
Sécurité des chariots de manutention - Chariots automoteurs dont la capacité n'excede
pas 10000 kg et tracteurs dont l'effort au crochet est inférieur ou égal a 20000 N - Partie
1 : Prescriptions générales - Amendement 1: Systemes de retenue de l'opérateur -
Spécification et procédure d'essai
Ta slovenski standard je istoveten z: EN 1726-1:1998/A1:2003
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN 1726-1:1999/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

--------------
...