Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (ISO 12402-8:2020)

This document specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs).

Persönliche Auftriebsmittel - Teil 8: Zubehörteile - Sicherheitstechnische Anforderungen und Prüfverfahren (ISO 12402-8:2020)

Dieses Dokument legt die sicherheitstechnischen Anforderungen und Prüfverfahren für Zubehörteile fest, die für persönliche Auftriebsmittel verwendet werden.

Équipements individuels de flottabilité - Partie 8 : Accessoires - Exigences de sécurité et méthodes d'essai (ISO 12402-8:2020)

Le présent document spécifie les exigences de sécurité et les méthodes d'essai utilisées pour les équipements individuels de flottabilité (EIF).

Osebni plavajoči pripomočki - 8. del: Dodatki - Varnostne zahteve in preskusne metode (ISO 12402-8:2020)

General Information

Status
Published
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
02-Sep-2020
Completion Date
02-Sep-2020

RELATIONS

Buy Standard

Standard
EN ISO 12402-8:2020
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 12402-8:2020
01-november-2020
Nadomešča:
SIST EN ISO 12402-8:2006
SIST EN ISO 12402-8:2006/A1:2011
Osebni plavajoči pripomočki - 8. del: Dodatki - Varnostne zahteve in preskusne
metode (ISO 12402-8:2020)

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods

(ISO 12402-8:2020)

Persönliche Auftriebsmittel - Teil 8: Zubehörteile - Sicherheitstechnische Anforderungen

und Prüfverfahren (ISO 12402-8:2020)

Équipements individuels de flottabilité - Partie 8 : Accessoires - Exigences de sécurité et

méthodes d'essai (ISO 12402-8:2020)
Ta slovenski standard je istoveten z: EN ISO 12402-8:2020
ICS:
13.340.70 Rešilni jopiči, vzgonska Lifejackets, buoyancy aids
pomagala in plavajoči and floating devices
pripomočki
SIST EN ISO 12402-8:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12402-8:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 12402-8:2020
EN ISO 12402-8
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2020
EUROPÄISCHE NORM
ICS 13.340.70 Supersedes EN ISO 12402-8:2006
English Version
Personal flotation devices - Part 8: Accessories - Safety
requirements and test methods (ISO 12402-8:2020)

Équipements individuels de flottabilité - Partie 8: Persönliche Auftriebsmittel - Teil 8: Zubehörteile -

Accessoires - Exigences de sécurité et méthodes d'essai Sicherheitstechnische Anforderungen und

(ISO 12402-8:2020) Prüfverfahren (ISO 12402-8:2020)
This European Standard was approved by CEN on 26 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12402-8:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12402-8:2020
EN ISO 12402-8:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Regulation (EU) 2016/425 of the European Parliament and of the

Council of 9 March 2016 on personal protective equipment aimed to be covered................. 4

---------------------- Page: 4 ----------------------
SIST EN ISO 12402-8:2020
EN ISO 12402-8:2020 (E)
European foreword

This document (EN ISO 12402-8:2020) has been prepared by Technical Committee ISO/TC 188 "Small

craft" in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and

arm protection and lifejackets” the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall

be withdrawn at the latest by March 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 12402-8:2006.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this

document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 12402-8:2020 has been approved by CEN as EN ISO 12402-8:2020 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 12402-8:2020
EN ISO 12402-8:2020 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered

This European Standard has been prepared under a Commission's standardization request to provide

one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the

European Parliament and of the Council of 9 March 2016 on personal protective equipment.

Once this standard is cited in the Official Journal of the European Union under that Regulation

(EU) 2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers,

within the limits of the scope of this standard, a presumption of conformity with the corresponding

essential requirements of that Regulation (EU) 2016/425 and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425

Essential Requirements of Regulation (EU) Clause(s)/sub-clause(s) Remarks/
2016/425 of this EN Notes
1.1.2.1 Optimum level of protection 5.5.1; 5.11
1.2.1 Absence of inherent risks and other nuisance 5.2 to 5.11
factors
1.2.1.2 Satisfactory surface condition of all PPE parts 5.2.1; 5.4.4
in contact with the user
1.3.2 Lightness and strength 5.2.4; 5.4.5; 5.6.2.1
3.4.1 Prevention of drowning 5.2; 5.5; 5.7; 5.8; 5.9; 5.10

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 6 ----------------------
SIST EN ISO 12402-8:2020
INTERNATIONAL ISO
STANDARD 12402-8
Second edition
2020-07
Personal flotation devices —
Part 8:
Accessories — Safety requirements
and test methods
Équipements individuels de flottabilité —
Partie 8: Accessoires — Exigences de sécurité et méthodes d'essai
Reference number
ISO 12402-8:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 12402-8:2020
ISO 12402-8:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12402-8:2020
ISO 12402-8:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification of PFDs ....................................................................................................................................................................................... 3

5 Specifications and test methods ........................................................................................................................................................... 3

5.1 General ........................................................................................................................................................................................................... 3

5.2 Whistles ......................................................................................................................................................................................................... 4

5.3 Deck safety harness and safety lines .................................................................................................................................... 4

5.4 Buddy lines ................................................................................................................................................................................................. 4

5.5 Sprayhood ................................................................................................................................................................................................... 5

5.5.1 General...................................................................................................................................................................................... 5

5.5.2 Gas exchange test ............................................................................................................................................................ 5

5.6 Protective covers for additional hazards .......................................................................................................................... 6

5.6.1 General...................................................................................................................................................................................... 6

5.6.2 Additional protection ................................................................................................................................................... 6

5.7 Multi-chamber buoyancy for back-up protection ..................................................................................................... 7

5.7.1 General...................................................................................................................................................................................... 7

5.7.2 Full back-up protection .............................................................................................................................................. 7

5.7.3 Partial back-up protection ....................................................................................................................................... 7

5.7.4 Inflatable buoyancy chambers ............................................................................................................................. 8

5.7.5 Marking for back up performance .................................................................................................................... 8

5.7.6 Explanation of back up performance in information supplied by the

manufacturer ...................................................................................................................................................................... 8

5.8 Supplemental-chamber buoyancy for enhanced performance ..................................................................... 8

5.8.1 General...................................................................................................................................................................................... 8

5.8.2 Testing ....................................................................................................................................................................................... 8

5.8.3 Over-pressure test of supplemental chamber(s) ................................................................................. 8

5.8.4 Marking for enhanced performance ............................................................................................................... 9

5.8.5 Explanation of supplemental chamber performance in information

supplied by the manufacturer .............................................................................................................................. 9

5.9 Lifting loops ............................................................................................................................................................................................... 9

5.10 Emergency position-indicating lights ................................................................................................................................. 9

5.10.1 Requirements ..................................................................................................................................................................... 9

5.10.2 Test methods ....................................................................................................................................................................10

5.10.3 Marking of emergency position-indicating lights ............................................................................11

5.11 PFDs with personal locator devices (PLDs) ................................................................................................................11

5.11.1 General...................................................................................................................................................................................11

5.11.2 Specific requirements for PFDs with integrated PLDs .................................................................11

5.11.3 Additional marking, information supplied by the manufacturer, and

consumer information at point of sale for PFDs with integrated PLDs .........................12

Annex A (informative) Classification of personal flotation devices ..................................................................................13

Bibliography .............................................................................................................................................................................................................................15

© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 12402-8:2020
ISO 12402-8:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 188, Small craft, Subcommittee SC 1,

Personal safety equipment.

This second edition cancels and replaces the first edition (ISO 12402-8:2006), which has been

technically revised. It also incorporates the Amendment ISO 12402-8:2006/Amd. 1:2011.

The main changes compared to the previous edition are as follows:
a) amendment of terms and definitions (Clause 3);
b) amendment of specifications and test methods (Clause 5);
c) addition of multi -chamber buoyancy;
d) addition of lifting loop;
e) amendment of emergency position-indicating lights (Clause 5.10);
f) amendment of Annex A “Classification of personal flotation devices”;
g) addition of PFDs with PLDs;
h) the marking with the number of the standard has been deleted.
A list of all parts in the ISO 12402 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 12402-8:2020
ISO 12402-8:2020(E)
Introduction

ISO 12402 (all parts):2020 deals with personal floatation devices (PFDs) for persons engaged in

activities, whether in relation to their work or their leisure, in or near water. PFDs manufactured,

selected, and maintained to this International Standard give a reasonable assurance of safety from

drowning to a person who is immersed in water. ISO 12402 (all parts):2020 does not include the

following:

— requirements for lifejackets on seagoing ships, which are regulated by the International Maritime

Organization (IMO) under the International Convention for the Safety of Life at Sea (SOLAS);

— throwable devices and flotation cushions.

ISO 12402 (all parts):2020 allows for the buoyancy of a PFD to be provided by a variety of materials or

designs, some of which can require preparation before entering the water (e.g. inflation of chambers by

gas from a cylinder or blown in orally). PFDs can be divided into the following two main classes:

— those which provide face up in -water support to the user regardless of physical conditions

(lifejackets), and

— those which require the user to make swimming and other postural movements to position the user

with the face out of the water (buoyancy aids).

Within these main two classes there are a number of levels of support, types of buoyancy, activation

methods for inflatable devices, and auxiliary items (such as location aids), which all affect the user‘s

probability of survival. Within the different types of buoyancy allowed, inflatable PFDs either provide

full buoyancy without any user intervention other than arming (i.e. PFDs inflated by a fully automatic

method) or require the user to initiate the inflation. Hybrid PFDs always provide some buoyancy but

rely on the same methods as inflatable PFDs to achieve full buoyancy. With inherently buoyant PFDs,

the user only needs to put the PFD on to achieve the performance of its class.

PFDs that do not require intervention (automatically operating PFDs) are suited to activities where

persons are likely to enter the water unexpectedly; whereas PFDs requiring intervention (e.g. manually

inflated PFDs) are only suitable for use if the user believes there will be sufficient time to produce

full buoyancy, if automatic operation would result in entrapment, or if help is close at hand. In every

circumstance, the user should ensure that the operation of the PFD is suited to the specific application.

The conformity of a PFD to this part of the ISO 12402 series: 2020 does not imply that it is suitable for

all circumstances. The relative amount of required inspection and maintenance is another factor of

paramount importance in the choice and application of specific PFDs.

ISO 12402 (all parts):2020 is intended to serve as a guide to manufacturers, purchasers, and users of

such safety equipment in ensuring that the equipment provides an effective standard of performance in

use. Equally essential is the need for the designer to encourage the wearing of the equipment by making

it comfortable and attractive for continuous wear on or near water, rather than for it to be stored in

a locker for emergency use. The primary function of a PFD is to support the user in reasonable safety

in the water. Within the two classes, alternative attributes make some PFDs better suited to some

circumstances than others or make them easier to use and care for than others. Important alternatives

provided by ISO 12402 (all parts):2020 are the following:

— to provide higher levels of support (levels 100, 150, or 275) that generally float the user with greater

water clearance, when required for increasingly severe conditions; or to provide lighter or less

bulky PFDs (levels 50 or 100);

— to provide the kinds of flotation (inherently buoyant foam, hybrid, and inflatable) that

accommodate the sometimes conflicting needs of reliability and durability, in-water performance,

and continuous wear;

1) The International Maritime Organization (IMO) is an institution with domicile in London issuing regulations

which are then published as laws by its Member States.
© ISO 2020 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 12402-8:2020
ISO 12402-8:2020(E)

— to provide automatically operating (inherently buoyant or automatically inflated) PFDs that float

users without any intervention on their part, except in initially donning the PFD (and regular

inspection and rearming of inflatable types), or to provide user control of the inflatable PFD’s

buoyancy by manual and oral operation; and
— to assist in detection (location aids) and recovery of the user.

PFDs provide various degrees of buoyancy in garments that are light in weight and only as bulky and

restrictive as needed for their intended use. They need to be secure when worn, in order to provide

positive support in the water and to allow users to swim or actively assist themselves or others. The

PFD selected ensures that the user is supported with the mouth and nose clear of the water under the

expected conditions of use and the user’s ability to assist.

Under certain conditions (such as rough water and waves), the use of watertight and multilayer clothing,

which provide (intentionally or otherwise) additional buoyancy, or the use of equipment with additional

weight (such as tool belts) can alter the performance of the PFD. Users, owners and employers need to

ensure that this is taken into account when selecting a PFD. Similarly, it is possible that PFDs do not

perform as well in extremes of temperature, although meeting ISO 12402 (all parts):2020 requirements.

PFDs can also be affected by other conditions of use, such as chemical exposure and welding, and can

require additional protection to meet the specific requirements of use. Taking a PFD into such conditions

necessitates the assurance that the PFD will not be adversely affected. ISO 12402 (all parts):2020 also

allows a PFD to be an integral part of a safety harness designed to conform to ISO 12401:2009, or an

integral part of a garment with other uses, for example to provide thermal protection during immersion,

in which case the complete assembly as used is expected to conform to ISO 12402 (all parts):2020.

In compiling the attributes required of a PFD, consideration has also been given to the potential length

of service that the user might expect. Whilst a PFD needs to be of substantial construction and material,

its potential length of service often depends on the conditions of use and storage, which are the

responsibility of the owner, user and/or employer. Furthermore, whilst the performance tests included

are believed to assess relevant aspects of performance in real-life use, they do not accurately simulate

all conditions of use. For example, the fact that a device passes the self-righting tests in swimming attire,

as described herein, does not guarantee that it will self-right an unconscious user wearing clothing;

neither can it be expected to completely protect the airway of an unconscious person in rough water.

Waterproof clothing can trap air and further impair the self-righting action of a lifejacket.

It is essential that owners, users and employers choose those PFDs that meet the correct standards for

the circumstances in which they will be used.

The characteristics of the product properties, alternative choices and the limitations to normal use are

to be explained to potential buyers by manufacturers and distributors of PFDs prior to purchase.

Similarly, it is advised that regulators regarding the use of these garments consider carefully which

class and performance levels are most appropriate for the foreseeable conditions of use, allowing

for the higher risk circumstances. These higher risk circumstances should account for the highest

probabilities of occurrence of accidental immersion and expected consequences. Requirements and

recommendations for the correct selection and application of PFDs are given in ISO 12402-10:2020.

vi © ISO 2020 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 12402-8:2020
INTERNATIONAL STANDARD ISO 12402-8:2020(E)
Personal flotation devices —
Part 8:
Accessories — Safety requirements and test methods
1 Scope

This document specifies the safety requirements and test methods for accessories used for personal

flotation devices (PFDs).
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 9150:1988, Protective clothing — Determination of behaviour of materials on impact of small splashes

of molten metal

ISO 12401:2009, Small craft — Deck safety harness and safety line — Safety requirements and test methods

ISO 12402-2:2020, Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety

requirements

ISO 12402-3:2020, Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety

requirements

ISO 12402-4:2020, Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety

requirements

ISO 12402-5:2020, Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements

ISO 12402-6:2020, Personal flotation devices — Part 6: Special application lifejackets and buoyancy aids —

Safety requirements and additional test methods

ISO 12402-7:2020, Personal flotation devices — Part 7: Materials and components — Safety requirements

and test methods
ISO 12402-9:2020, Personal flotation devices — Part 9: Evaluation

IMO Resolution A.689 (17), Recommendation on Testing of Live‑Saving Appliances, as amended through

Resolution MSC 81(70)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.