EN 15159-2:2006

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock

This European Standard specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes.
It is applicable to enamelled apparatus, components and piping components primarily used for process equipment in chemical plants.
This European Standard only applies to unalloyed and low-alloy carbon steels suitable for enamelling.
NOTE   The main criteria for assessing enamel quality are the resistance to chemical attack and thermal shock and the structure of the cover coat enamel.

Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 2: Bezeichnung und Festlegung der chemischen und Temperaturschockbeständigkeit

Emaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique

La présente Norme européenne définit les exigences pour la résistance à l'attaque chimique et au choc thermique des émaux chimiques et leur désignation pour la commande.
Elle est applicable aux appareils, aux composants et aux composants de tuyauterie émaillée principalement utilisés pour l'équipement industriel dans les usines chimiques.
La présente Norme européenne s’applique uniquement aux aciers au carbone faiblement alliés et non alliés, convenant à l’émaillage.
NOTE   Les principaux critères pour évaluer la qualité de l’émail sont la résistance à l’attaque chimique et au choc thermique, ainsi que la structure du revêtement émaillé.

Steklasti in keramični emajli – Emajlirane naprave za procesno opremo – 2. del: Označevanje in specifikacija odpornosti proti kemični agresiji in toplotnemu udaru

General Information

• Status: Withdrawn
• Publication Date: 11-Jul-2006
• Withdrawal Date: 12-Apr-2011
• ICS: 25.220.50 - Enamels
• ICS: 71.120.10 - Reaction vessels and their components
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 5 - Vitreous enamel coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Apr-2011
• Completion Date: 13-Apr-2011
• Ref Project: SIST EN 15159-2:2006 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock

Relations

• Replaced By: EN ISO 28721-2:2011 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2008)
• Effective Date: 17-Oct-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shockEmaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2: Désignation et spécifications de la résistance a l'attaque chimique et au choc thermiqueEmails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 2: Bezeichnung und Festlegung der chemischen und TemperaturschockbeständigkeitTa slovenski standard je istoveten z:EN 15159-2:2006SIST EN 15159-2:2006en25.220.50ICS:SLOVENSKI
STANDARDSIST EN 15159-2:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15159-2July 2006ICS 71.120.10; 25.220.50 English VersionVitreous and porcelain enamels - Glass-lined apparatus forprocess plants - Part 2: Designation and specification ofresistance to chemical attack and thermal shockEmaux vitrifiés - Appareils émaillés pour les installationsindustrielles - Partie 2: Exigences de qualitéEmails und Emaillierungen - Emaillierte Apparate fürverfahrenstechnische Anlagen - Teil 2: Bezeichnung undFestlegung der chemischen undTemperaturschockbeständigkeitThis European Standard was approved by CEN on 12 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15159-2:2006: E



EN 15159-2:2006 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Designation.5 4 Quality requirements.5 Bibliography.7



EN 15159-2:2006 (E) 3 Foreword This document (EN 15159-2:2006) has been prepared by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. EN 15159 is comprised of the following parts under the general heading Vitreous and porcelain enamels — Glass-lined apparatus for process plants
Part 1: Quality requirements for apparatus, components, appliances and accessories Part 2: Designation and specification of resistance to chemical attack and thermal shock Part 3: Thermal shock resistance According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 15159-2:2006 (E) 4 Introduction For many materials, the chemical composition can serve as a basis for a specification. This is not possible for che
...