EN ISO 11960:2011

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2011)

ISO 11960:2010 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three product specification levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2010. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all grades except H-40, L-80 9Cr and C110, are contained in Annex H.
For pipes covered by ISO 11960:2010, the sizes, masses and wall thicknesses as well as grades and applicable end-finishes are listed.
By agreement between the purchaser and manufacturer, ISO 11960:2010 can also be applied to other plain-end pipe sizes and wall thicknesses.
ISO 11960:2010 is applicable to the following connections in accordance with API Spec 5B: short round thread casing (SC), long round thread casing (LC), buttress thread casing (BC), non-upset tubing (NU), external upset tubing (EU) and integral tubing connections (IJ).
For such connections, ISO 11960:2010 specifies the technical delivery conditions for couplings and thread protection. Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given.
ISO 11960:2010 can also be applied to tubulars with connections not covered by ISO/API standards.
The four groups of products to which ISO 11960:2010 is applicable include the following grades of pipe: group 1, including all casing and tubing in grades H, J, K, N and R; group 2, including all casing and tubing in grades C, L, M and T; group 3, including all casing and tubing in grade P; and group 4, including all casing in grade Q.
Casing sizes larger than label 1: 4-1/2 but smaller than label 1: 10-3/4 can be specified by the purchaser for use in tubing service.
Supplementary requirements that can optionally be agreed between purchaser and manufacturer for non-destructive examination, fully machined coupling blanks, upset casing, electric-welded casing, tubing and pup joints, impact testing, seal ring couplings, test certificates, tensile testing and sulfide stress cracking testing are given.
ISO 11960:2010 is not applicable to threading requirements. Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as instruments and methods for inspection of threads are given in API Spec 5B.

Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung als Futter- oder Steigrohre für Bohrungen (ISO 11960:2011)

Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits (ISO 11960:2011)

Industrija za predelavo nafte in zemeljskega plina - Jeklene cevi, ki se uporabljajo kot zaščitne cevi ali cevovodi za vrtine (ISO 11960:2011)

Ta mednarodni standard določa tehnične dobavne pogoje za jeklene cevi (ohišje, cevi in spoje), zaloge spojk, spojni material in dodatno opremo in zahteve za tri ravni specifikacije proizvoda (PSL-1, PSL-2, PSL-3). Zahteve za PSL-1 so osnova tega mednarodnega standarda. Zahteve, ki določajo različne ravni standardnih tehničnih zahtev za PSL-2 in PSL-3, za vse razrede, razen H-40, L-80 9Cr in C110, so zajete v dodatku H. Za cevi, ki jih zajema ta mednarodni standard, so velikosti, mase in debeline sten ter razredi in ustrezna končna obdelava, navedeni v preglednicah C.1 in C.2 ter E.1 in E.2. Po dogovoru med kupcem in proizvajalcem se lahko ta mednarodni standard uporablja tudi za druge cevi z navadnim zaključkom različnih velikosti in debeline sten.

General Information

• Status: Withdrawn
• Publication Date: 21-Jun-2011
• Withdrawal Date: 21-Jan-2014
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Jan-2014
• Completion Date: 22-Jan-2014
• Ref Project: SIST EN ISO 11960:2011 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2011)

Relations

• Replaces: EN ISO 11960:2004 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004)
• Effective Date: 29-Jun-2011
• Replaces: EN ISO 11960:2004/AC:2007 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004/Cor 1:2006)
• Effective Date: 29-Jun-2011
• Replaced By: EN ISO 11960:2014 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014)
• Effective Date: 29-Jan-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11960:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 11960:2005
SIST EN ISO 11960:2005/AC:2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD-HNOHQHFHYLNLVHXSRUDEOMDMR
NRW]DãþLWQHFHYLDOLFHYRYRGL]DYUWLQH,62
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
(ISO 11960:2011)
Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung als Futter- oder Steigrohre für
Bohrungen (ISO 11960:2011)
Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme cuvelage ou tubes
de production dans les puits (ISO 11960:2011)
Ta slovenski standard je istoveten z: EN ISO 11960:2011
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN ISO 11960:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11960:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 11960:2011


EUROPEAN STANDARD
EN ISO 11960

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2011
ICS 75.180.10; 77.140.75 Supersedes EN ISO 11960:2004
English Version
Petroleum and natural gas industries - Steel pipes for use as
casing or tubing for wells (ISO 11960:2011)
Industries du pétrole et du gaz naturel - Tubes d'acier Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung als
utilisés comme cuvelage ou tubes de production dans les Futter- oder Steigrohre für Bohrungen (ISO 11960:2011)
puits (ISO 11960:2011)
This European Standard was approved by CEN on 17 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11960:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11960:2011
EN ISO 11960:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11960:2011
EN ISO 11960:2011 (E)
Foreword
This document (EN ISO 11960:2011) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn
at the latest by December 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11960:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11960:2011 has been approved by CEN as a EN ISO 11960:201
...