Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks

This European Standard specifies the general safety requirements of slewing variable-reach rough-terrain trucks (here-after referred to as trucks), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is typically fitted.
Fork arms are covered by this European Standard and considered to be parts of the truck.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) with the exception of hazards listed in 1.3 and 1.4.
This European Standard does not apply to:
-   variable-reach rough terrain trucks covered by prEN 1459-1 (non-slewing);
-   industrial variable-reach trucks covered by prEN ISO 3691 2;
-   lorry-mounted variable-reach trucks;
-   variable reach trucks fitted with tilting or elevating operator position;
-   mobile cranes covered by EN 13000;
-   machines designed primarily for earth moving, such as loaders and dozers, even if their buckets and blades are replaced with forks (see EN 474 series);
-   trucks designed primarily with variable length load suspension elements (e.g., chain, ropes) from which the load may swing freely in all directions;
-   trucks designed primarily for container handling;
-   trucks on tracks;
-   attachments (prEN 1459-5).
This European Standard does not address hazards linked to:
-   hybrid power systems;
-   gas power system;
-   trucks equipped with gasoline engine;
-   battery power system;
-   tractor specific devices (e.g. PTO).
This European Standard does not address hazards which may occur when:
a)   handling suspended loads which may swing freely (additional requirements are given in prEN 1459-4);
b)   using trucks on public roads;
c)   operating in potentially explosive atmospheres;
d)   operating underground;
e)   when towing trailers;
f)   fitted with a personnel work platform (additional requirements are given in EN 1459-3).

Geländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil 2: Schwenkbare Stapler mit veränderlicher Reichweite

Diese Europäische Norm legt die allgemeinen sicherheitstechnischen Anforderungen an geländegängige schwenkbare Stapler mit veränderlicher Reichweite (im Folgenden als Stapler bezeichnet) fest, bestehend aus einem abgesenkten Fahrgestell mit schwenkbarem oberen Aufbau mit einem Teleskophubarm als Hebevorrichtung (Schwenkhubarm), an der in der Regel ein Lastaufnahmemittel (z. B. Trägerplatte und Gabelzinken) angebracht ist.
Gabelzinken werden in dieser Europäischen Norm behandelt und gelten als Teile des Staplers.
Diese Europäische Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Stapler zutreffen, wenn sie bestimmungsgemäß und unter Bedingungen von durch den Hersteller vernünftigerweise vorhersehbaren Fehlanwendungen verwendet werden (siehe Anhang A).
Diese Europäische Norm gilt nicht für:
—   geländegängige Stapler mit veränderlicher Reichweite (nicht schwenkbar), die in prEN 1459-1 behandelt werden;
—   motorkraftbetriebene Flurförderzeuge mit veränderlicher Reichweite (behandelt in prEN ISO 3691-2);
—   LKW-Stapler mit veränderlicher Reichweite;
—   Stapler mit veränderlicher Reichweite mit neigbarem oder höhenverstellbarem Bedienerplatz;
—   Fahrzeugkrane (behandelt in EN 13000);
—   Maschinen, die in erster Linie für Erdarbeiten ausgelegt sind, wie etwa Radlader und Planierraupen, auch wenn deren Schaufeln und Planierschilde durch Gabeln ersetzt wurden (siehe Normenreihe EN 474);
—   Stapler, die in erster Linie mit Lastaufhängemitteln mit veränderlicher Länge (z. B. Kette, Seil) ausgelegt sind, an denen die Last ungehindert in alle Richtungen schwingen kann;
—   Stapler, die in erster Linie für die Handhabung von Containern ausgelegt sind;
—   schienengebundene Stapler;
—   Anbaugeräte (prEN 1459-5).
Diese Europäische Norm behandelt keine Gefährdungen in Verbindung mit:
—   Staplern mit Hybridantrieb;
—   gasbetriebenen Stapler;
—   Stapler, die mit Ottomotor ausgestattet sind;
—   batteriebetriebene Stapler;
—   traktorspezifischen Vorrichtungen (z. B. Zapfwellengetriebe).
Diese Europäische Norm befasst sich nicht mit Gefährdungen, die auftreten können bei:
a)   Beförderung schwebender Lasten, die frei schwingen können (zusätzliche Anforderungen sind in prEN 1459 4 angegeben);
b)   Benutzung von Staplern auf öffentlichen Straßen;
c)   Benutzung in explosionsfähigen Atmosphären;
d)   Benutzung für Arbeiten unter Tage;
e)   Schleppen von Anhängern;
f)   Ausstattung mit einer Arbeitsbühne für das Personal (zusätzliche Anforderungen sind in EN 1459 3 angegeben).

Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 2 : Chariots à portée variable rotatifs

La présente Norme européenne spécifie les prescriptions générales de sécurité des chariots tout-terrain à portée variable rotatifs (ci-après désignés « chariots »), constitués d’un châssis inférieur avec une structure supérieure rotative équipée de moyens de levage télescopiques (flèche rotative), sur lesquels un dispositif porte-charge est habituellement monté (par exemple, un tablier porte-équipement et des bras de fourche).
Les bras de fourche sont couverts par la présente Norme européenne et considérés comme des parties du chariot.
La présente Norme européenne traite de tous les phénomènes dangereux significatifs, des situations et évènements dangereux pertinents pour les chariots lorsqu'ils sont utilisés comme prévu et dans les conditions de mauvaise utilisation qui sont raisonnablement prévisibles par le fabricant (voir Annexe A).
La présente Norme européenne ne s'applique pas :
   aux chariots tout-terrain à portée variable couverts par le prEN 1459-1 (non rotatifs) ;
   aux chariots industriels à portée variable (couverts par le prEN ISO 3691-2) ;
   aux chariots à portée variable embarqués sur porteurs routiers ;
   aux chariots à portée variable équipés d’un poste de conduite inclinable ou élevable ;
   aux grues mobiles (couvertes par l'EN 13000) ;
   aux machines conçues principalement pour le terrassement, comme les chargeuses et les bouteurs, même si leurs godets et leurs lames sont remplacés par des fourches (voir la série de normes EN 474) ;
   aux chariots conçus principalement avec des éléments de suspension de la charge à longueur variable (tels que chaînes, câbles) desquels la charge peut osciller librement dans toutes les directions ;
   aux chariots conçus principalement pour la manutention de conteneurs ;
   aux chariots sur chenilles ;
   aux accessoires (prEN 1459-5).
La présente Norme européenne ne traite pas des phénomènes dangereux liés aux :
   systèmes à source d'énergie hybride ;
   systèmes à source d'énergie gaz ;
   chariots équipés d'un moteur à essence ;
   systèmes alimentés par batteries ;
   dispositifs spécifiques aux tracteurs (par exemple, PTO).
La présente Norme européenne ne traite pas des phénomènes dangereux pouvant apparaître :
a)   lors de la manutention de charges suspendues qui peuvent se balancer librement (les prescriptions supplémentaires sont données dans le prEN 1459-4) ;
b)   lors de l'utilisation des chariots sur les voies publiques ;
c)   lors d’une utilisation en atmosphères explosibles ;
d)   lors de travaux souterrains ;
e)   lors de la traction de remorques ;
f)   lorsque les chariots sont équipés d’une plates-forme de personnel/travail (des prescriptions supplémentaires sont données dans l’EN 1459-3).

Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 2. del: Vozila z vrtljivim mehanizmom za dviganje s spremenljivim dosegom

Ta evropski standard (prEN 1459-2) določa splošne varnostne zahteve za vozila za talni transport z vrtljivim mehanizmom za dviganje s spremenljivim dosegom, opremljena s teleskopskim dvižnim mehanizmom (vrtljivo roko), na katerem je običajno pritrjena naprava za upravljanje tovora (npr. nosilec in vilice). Vilice in drugi integrirani priključki se obravnavajo kot deli vozila. Za priključke se uporabljajo ustrezne točke tega standarda, lahko pa se uporabljajo tudi drugi posebni standardi.

General Information

Status
Withdrawn
Publication Date
15-Sep-2015
Withdrawal Date
16-Oct-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Oct-2018

Relations

Buy Standard

Standard
EN 1459-2:2015
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 2. del: Vozila z vrtljivim mehanizmom za dviganje s spremenljivim dosegomGeländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil 2: Schwenkbare Stapler mit veränderlicher ReichweiteChariots tout-terrain - Exigences de sécurité et vérification - Partie 2: Chariots à portée variable rotatifsRough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 1459-2:2015SIST EN 1459-2:2015en,fr,de01-december-2015SIST EN 1459-2:2015SLOVENSKI
STANDARD



SIST EN 1459-2:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1459-2
September
t r s w ICS
w uä r x r English Version
Roughæterrain trucks æ Safety requirements and verification æ Part
tã Slewing variableæreach trucks Chariots toutæterrain æ Prescriptions de sécurité et vérification æ Partie
t ã Chariots à portée variable rotatifs
Geländegängige Stapler æ Sicherheitstechnische Anforderungen und Verifizierung æ Teil
tã Schwenkbare Stapler mit veränderlicher Reichweite This European Standard was approved by CEN on
s y July
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v w {æ tã t r s w ESIST EN 1459-2:2015



EN 1459-2:2015 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 7 3 Terms and definitions . 9 4 Safety requirements and/or protective measures . 14 4.1 General . 14 4.2 Starting/moving . 15 4.3 Brakes. 16 4.4 Electrical and electronic systems . 16 4.5 Controls . 17 4.6 Power systems and accessories . 23 4.7 Stabilizing devices . 24 4.8 Design requirements for maintenance purposes . 26 4.9 Systems for lifting, tilting, reaching and slewing . 27 4.10 Operator’s station .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.