EN 13286-4:2003
(Main)Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
This European Standard specifies a method for the determination of the relationship between the dry density and moisture content of a mixture when compacted using a vibrating hammer. It applies to mixtures used in road construction which contain not more than 30% by mass retained on the 20 mm test sieve.
Ungebundene und hydraulisch gebundene Gemische - Teil 4: Laborprüfverfahren für die Trockendichte und den Wassergehalt - Vibrationshammer
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Zusammenhangs zwischen der Trockendichte und dem Wassergehalt eines Gemisches fest, das mit einem Vibrationshammer verdichtet wird.
Diese Europäische Norm gilt für Gemische, die im Straßenbau verwendet werden und bei denen auf dem 20-mm-Analysensieb ein Rückstand £ 30 Massenanteilen in % zurückbleibt. Sie ist nicht auf Gemische anwendbar, deren Rückstand auf dem 40-mm-Analysensieb 10 Massenanteile in % überschreitet.
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 4: Méthode d'essai de détermination en laboratoire de la masse volumique apparente sèche de référence et de la teneur en eau - Marteau vibrant
La présente Norme européenne spécifie une méthode d'essai pour déterminer la relation entre la masse volumique apparente sèche et la teneur en eau d'un mélange compacté au marteau vibrant.
La présente norme s'applique aux mélanges utilisés en construction routière ne dépassant pas 30 % en masse de refus au tamis de 20 mm. Elle ne s'applique pas aux mélanges dépassant 10 % en masse de refus au tamis de 40 mm.
Nevezane in hidravlično vezane zmesi – 4. del: Preskusne metode za laboratorijsko referenčno gostoto in vsebnost vode – Vibracijsko kladivo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DNODGLYRUngebundene und hydraulisch gebundene Gemische - Teil 4: Laborprüfverfahren für die Trockendichte und den Wassergehalt - VibrationshammerMélanges traités et mélanges non traités aux liants hydrauliques - Partie 4: Méthode d'essai de détermination en laboratoire de la masse volumique apparente seche de référence et de la teneur en eau - Marteau vibrantUnbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-4:2003SIST EN 13286-4:2004en01-junij-2004SIST EN 13286-4:2004SLOVENSKI
STANDARD
SIST EN 13286-4:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-4March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 4: Testmethods for laboratory reference density and water content -Vibrating hammerMélanges traités et mélanges non traités aux liantshydrauliques - Partie 4: Méthodes d'essai pour la massevolumique de référence et la teneur en eau en laboratoire -Marteau vibrantUngebundene und hydraulisch gebundene Gemische - Teil4: Laborprüfverfahren für die Trockendichte und denWassergehalt - VibrationshammerThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-4:2003 ESIST EN 13286-4:2004
EN 13286-4:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.55Apparatus.56Preparation of test portions.77Procedure.88Calculation and expression of results.99Test report.10Annex A (normative)
Performance check of vibrating hammer.11Annex B (normative)
Compatibility test for graded aggregates.12SIST EN 13286-4:2004
EN 13286-4:2003 (E)3ForewordThis document (EN 13286-4:2003) has been prepared by Technical Committee CEN/TC 227 "Road Materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by December 2003.This European Standard is one of a series of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.