iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 41001:2018/prA1

(Amendment)

Facility management - Management systems - Requirements with guidance for use - Amendment 1: Climate action changes (ISO 41001:2018/Amd 1:2024)

Facility management - Management systems - Requirements with guidance for use - Amendment 1: Climate action changes (ISO 41001:2018/Amd 1:2024)

Facility Management - Managementsysteme - Anforderungen mit Anleitung für die Anwendung - Änderung 1: Maßnahmen zum Klimawandel (ISO 41001:2018/Amd 1:2024)

Facility management - Systèmes de management - Exigences avec recommandations d'utilisation - Amendement 1: Actions relatives aux changements climatiques (ISO 41001:2018/Amd 1:2024)

Upravljanje objektov in storitev - Upravljanje sistemov - Zahteve z navodili za uporabo - Dopolnilo A1: Spremembe podnebnih ukrepov (ISO 41001:2018/Amd 1:2024)

General Information

Status
Not Published
Publication Date
04-Nov-2025
ICS
03.080.10 - Maintenance services. Facilities management
03.100.70 - Management systems
Technical Committee
CEN/TC 348 - Facility management
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
09-May-2024
Completion Date
09-May-2024
Ref Project
SIST EN ISO 41001:2018/oprA1:2024 - Facility management - Management systems - Requirements with guidance for use - Amendment 1: Climate action changes (ISO 41001:2018/Amd 1:2024)

Relations

Amends
EN ISO 41001:2018 - Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
Effective Date
22-Nov-2023

Buy Standard

EN ISO 41001:2018/oprA1:2024EN ISO 41001:2018/oprA1:2024
PreviousNext
Draft
EN ISO 41001:2018/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 41001:2018/oprA1:2024
01-julij-2024
Upravljanje objektov in storitev - Upravljanje sistemov - Zahteve z navodili za
uporabo - Dopolnilo A1: Spremembe podnebnih ukrepov (ISO 41001:2018/Amd
1:2024)
Facility management - Management systems - Requirements with guidance for use -
Amendment 1: Climate action changes (ISO 41001:2018/Amd 1:2024)
Facility Management - Managementsysteme - Anforderungen mit Anleitung für die
Anwendung - Änderung 1: Maßnahmen zum Klimawandel (ISO 41001:2018/Amd
1:2024)
Facility management - Systèmes de management - Exigences avec recommandations
d'utilisation - Amendement 1: Actions relatives aux changements climatiques (ISO
41001:2018/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 41001:2018/prA1
ICS:
03.080.10 Vzdrževalne storitve. Maintenance services.
Upravljanje objektov Facilities management
03.100.70 Sistemi vodenja Management systems
SIST EN ISO 41001:2018/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 41001:2018/oprA1:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 41001:2018/oprA1:2024
International
Standard
ISO 41001
First edition
Facility management —
2018-04
Management systems —
Requirements with guidance for use
AMENDMENT 1
2024-02
AMENDMENT 1: Climate action
changes
Facility management — Systèmes de management — Exigences
avec recommandations d'utilisation
AMENDEMENT 1: Actions relatives aux changements climatiques
Reference number
ISO 41001:2018/Amd.1:2024(en) © ISO 2024

---------------------- Page: 3 ----------------------
SIST EN ISO 41001:2018/oprA1:2024
ISO 41001:2018/Amd.1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
SIST EN ISO 41001:2018/oprA1:2024
ISO 41001:2018/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a su
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 41001:2018(Main)
Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
SIST EN ISO 41001:2018

ISO 41001:2018 specifies the requirements for a facility management (FM) system when an organization:
a)    needs to demonstrate effective and efficient delivery of FM that supports the objectives of the demand organization;
b)    aims to consistently meet the needs of interested parties and applicable requirements;
c)    aims to be sustainable in a globally-competitive environment.
The requirements specified in ISO 41001:2018 are non-sector specific and intended to be applicable to all organizations, or parts thereof, whether public or private sector, and regardless of the type, size and nature of the organization or geographical location.
Annex A provides additional guidance on the use of this document.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 41001:2018(Main)
Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
SIST EN ISO 41001:2018

ISO 41001:2018 specifies the requirements for a facility management (FM) system when an organization:
a)    needs to demonstrate effective and efficient delivery of FM that supports the objectives of the demand organization;
b)    aims to consistently meet the needs of interested parties and applicable requirements;
c)    aims to be sustainable in a globally-competitive environment.
The requirements specified in ISO 41001:2018 are non-sector specific and intended to be applicable to all organizations, or parts thereof, whether public or private sector, and regardless of the type, size and nature of the organization or geographical location.
Annex A provides additional guidance on the use of this document.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28139:2021/A1:2024(Amendment)
Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods - Amendment 1 (ISO 28139:2019/Amd 1:2024)
SIST EN ISO 28139:2021/A1:2024
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12224-2:2024(Main)
Solder wire, solid and flux-cored - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:2024)
oSIST prEN ISO 12224-2:2023

This document specifies two methods for the determination of the flux content of a sample flux-cored solder wire.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17855:2024(Main)
Foodstuffs - Minimum performance requirements for quantitative measurement of the food allergens milk, egg, peanut, hazelnut, almond, walnut, cashew, pecan nut, brazil nut, pistachio nut, macadamia nut, wheat, lupine, sesame, mustard, soy, celery, fish, molluscs and crustaceans
SIST EN 17855:2024

This document specifies minimum performance requirements for methods that quantify the food allergens milk, egg, peanut, hazelnut, almond, brazil nut, macadamia nut, cashew, pistachio nut, walnut, pecan nut, lupine, sesame, mustard, soy, celery, fish, molluscs, crustaceans, and wheat in raw and processed foodstuffs. Within the scope of this document, minimum requirements for an LOQ (Limit of Quantification) will be derived from threshold data of allergic consumers. For quantitative antibody-based methods, a normative annex will describe what specific information the method developer needs to deliver and how performance characteristics shall be validated. Regarding PCR and LC-MS/MS, information on performance characteristics are in parts covered by EN 15634-1 and EN 17644. This document does not apply to fragmented or hydrolysed food allergens, such as casein hydrolysates or soy sauce. It also does not apply to methods that deliver qualitative results only. Methods that cover gluten-containing cereals (wheat, rye, and barley) with regard to coeliac disease are covered by EN 17254.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18040:2024(Main)
Stationary source emissions - Determination of the mass concentration of formaldehyde - Automatic method
kSIST-TS FprCEN/TS 18040:2024

This document specifies a measurement method based on an automatic method for determination of the mass concentration of formaldehyde in ducts and stacks emitting to the atmosphere. It specifies the sampling and gas conditioning system. Furthermore, it specifies the characteristics to be determined and the performance criteria to be fulfilled by portable automated measuring systems (P-AMS) using appropriate techniques to measure formaldehyde.
This method is intended for intermittent monitoring of formaldehyde emissions as well as for the calibration and validation of automated formaldehyde measuring systems.
The analyser is calibrated using test gases produced by a test gas generator.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15502-3-1:2024(Main)
Gas-fired central heating boilers - Part 3-1: H2NG and ACCF - Expansion of EN 15502-2-1:2022
kSIST-TS FprCEN/TS 15502-3-1:2024

Scope of CEN/TS 15502-3-1
EN 15502-2-1:2022, Clause 1 applies with the following modifications:
Add after k):
l) which are fully premixed appliances equipped with an Adaptive Combustion Control Function (ACCF) that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance including gas grids for natural gases of the second family where up to 20% hydrogen volume is added to the natural gas (H2NG-Y20).
m) which are fully premixed appliances equipped with a Pneumatic Gas Air Ratio controller (PGAR) that are intended to be connected to gas grids for natural gases of the second family where up to 20% hydrogen volume is added to the natural gas (H2NG-Y20), where the quality of the distributed gas without adding the hydrogen is not likely to vary to a large extent over the lifetime of the appliance.
Replace ab) and ak) and al) by the following:
ab) appliances that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance (see Annex AB of EN 15502-1:2021), except for fully premixed appliances with a ACCF, as ACCF appliances are designed to adapt to variations in gas quality.
ak) appliances that are intended to burn natural gases of the second family where hydrogen is added to the natural gas, except for fully premixed appliances with a ACCF or PGAR (which are covered by this document);
al) Partially premixed appliances equipped with an adaptive combustion control function (ACCF).

  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-16:2024(Main)
Tissue paper and tissue products - Part 16: Determination of optical properties - Diffuse reflectance method for opacity (paper backing) (ISO 12625-16:2024)
SIST EN ISO 12625-16:2024

This document specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing.
This document contains specific instructions for the preparation of test pieces of single-ply and multi-ply products, where special preparation/procedures might be necessary.
It can be used to determine the opacity of tissue paper and tissue products containing fluorescent whitening agents, provided the UV content of the radiation incident on the test piece has been adjusted to conform to that in the CIE illuminant C using a fluorescent reference standard provided by an authorized laboratory as described in ISO 2470-1.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12309-3:2024(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods
kSIST FprEN 12309-3:2024

1.1   Scope of EN 12309 series
Appliances covered by this document include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump;
-   hybrids based on gas sorption appliances.
This document applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This document applies to appliances having flue gas systems of Type B and Type C (according to EN 1749:2020) and to appliances designed for outdoor installations, including Type A.
EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems;
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated;
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2023).
In the case of packaged units (consisting of several parts), this document applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text are to be used regardless of the language used.
1.2   Scope of this Part 3 of EN 12309
This part of EN 12309 specifies the requirements, test methods and conditions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.
This part of EN 12309 deals particularly with test protocols and tools to calculate the capacity, the gas utilization efficiency and the electrical power input of the appliance. This data can be used in particular to calculate the seasonal efficiency of the appliance.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14620-1:2024(Main)
Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196 °C - Part 1: General
kSIST FprEN 14620-1:2024

This document is a specification for vertical, cylindrical tank systems, built on site, above ground and of which either the primary liquid container or the liquid tight barrier is made of steel. The secondary liquid container, if applicable, can be of steel or of concrete or a combination of both. A primary liquid container made of pre-stressed concrete is excluded from the scope of this document.
This document provides general requirements and specifies principles and application rules for the structural design of the tank system during construction, testing, commissioning, operation (accidental included), and decommissioning. This document applies to all tank system components attached to and located within the liquid, vapour, purge gas, membrane or membrane tank outer containers of the tank system. It does not address the requirements for ancillary equipment such as pumps, pumpwells, valves, instrumentation, external staircases and walkways, roof mounted platforms, external pipe supports, etc. The requirements for those components are covered by the relevant European Standards, structurally designed in accordance with Eurocodes where appropriate, and meeting applicable safety regulations.
This document also does not address tank system operating procedures unless specified for determination of the relevant resistance and protection criteria for the tank systems. It specifies minimum performance requirements for the tank system, tank system foundation and protection systems. From a process piping standpoint, the scope of this document is limited to the following boundaries:
a)   the face of the first flange outside of the tank in bolted flanged connection;
b)   the first threaded joint outside of the tank in threaded connection;
c)   the first circumferential pipe welded joint outside of the tank in welding-end pipe connection, which does not have a flange.
This document is applicable to storage tank systems designed to store products, having an atmospheric boiling point below ambient temperature, in a dual phase, i.e. liquid and vapour. The equilibrium between liquid and vapour phases being maintained by cooling down the product to a temperature equal to, or just below, its atmospheric boiling point in combination with a slight overpressure in the storage tank system.
The maximum design pressure of the tank systems covered by this document is limited to 500 mbar. For higher pressures, reference can be made to EN 13445, Parts 1 to 5.
The operating range of the gases to be stored is between 0 °C and −196°C.
The tank systems covered by this document are used to store large volumes of hydrocarbon products, ammonia and other non-hydrocarbon gases with low temperature boiling points, generally called “Refrigerated Liquefied Gases” (RLGs). Typical products stored in the tank systems are: methane, ethane, propane, butane, ethylene, propylene, butadiene (this range includes the Liquefied Natural Gas (LNG’s) and Liquefied Petroleum Gas (LPG’s)), ammonia, nitrogen, oxygen and argon.
NOTE 1   Properties of the gases are given in Annex A.
The requirements of this document cannot cover all details of design and construction because of the variety of sizes and configurations that may be employed. Where complete requirements for a specific design are not provided, the intention is for the designer, subject to approval of the purchaser's authorized representative and of the regulatory body, to provide design and details that are as safe as those laid out in this document.
EN 14620 consists of multiple parts.  This document specifies general requirements for the tank system concept, selection and general design considerations.
In case of a conflict between general requirements of this document and the requirements in other parts of EN 14620 related to a specific liquefied gas, the product-specific requirements set forth in the other parts prevail.

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day