iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10140-3:2010/prA3

(Amendment)

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010/DAM 3:2013)

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010/DAM 3:2013)

ISO 10140-3:2010 specifies laboratory methods for measuring the impact sound insulation of floor assemblies.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 3: Messung der Trittschalldämmung (ISO 10140-3:2010/DAM 3:2013)

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 3: Mesurage de l'isolation au bruit de choc (ISO 10140-3:2010/DAM 3:2013)

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 3. del: Merjenje izolirnosti pred udarnim zvokom (ISO 10140-3:2010/DAM 3:2013)

General Information

Status
Not Published
Publication Date
22-Sep-2014
Withdrawal Date
22-Mar-2015
ICS
91.120.20 - Acoustics in building. Sound insulation
Technical Committee
CEN/TC 126 - Acoustic properties of building products and of buildings
Drafting Committee
CEN/TC 126/WG 1 - Methods for measuring the sound insulation of building elements and the acoustic performances of buildings
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
05-Aug-2014
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
M/106 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on gypsum products
M/108 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on curtain walling
M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
Ref Project
SIST EN ISO 10140-3:2010/oprA3:2013 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010/DAM 3:2013)

Relations

Amends
EN ISO 10140-3:2010 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10140-3:2010/oprA3:2013EN ISO 10140-3:2010/oprA3:2013
PreviousNext
Draft
EN ISO 10140-3:2010/oprA3:2013
German language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10140-3:2010/oprA3:2013
01-september-2013
$NXVWLND/DERUDWRULMVNRPHUMHQMH]YRþQHL]ROLUQRVWLJUDGEHQLKHOHPHQWRYGHO
0HUMHQMHL]ROLUQRVWLSUHGXGDUQLP]YRNRP ,62'$0
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3:
Measurement of impact sound insulation (ISO 10140-3:2010/DAM 3:2013)
Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 3: Messung der
Trittschalldämmung (ISO 10140-3:2010/DAM 3:2013)
Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de
construction - Partie 3: Mesurage de l'isolation au bruit de choc (ISO 10140-3:2010/DAM
3:2013)
Ta slovenski standard je istoveten z: EN ISO 10140-3:2010/prA3
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10140-3:2010/oprA3:2013 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10140-3:2010/oprA3:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10140-3:2010/oprA3:2013


EUROPÄISCHE NORM
ENTWURF
EN ISO 10140-3:2010
EUROPEAN STANDARD

NORME EUROPÉENNE
prA3
Juli 2013
ICS 91.120.20
Deutsche Fassung
Akustik - Messung der Schalldämmung von Bauteilen im
Prüfstand - Teil 3: Messung der Trittschalldämmung (ISO
10140-3:2010/DAM 3:2013)
Acoustics - Laboratory measurement of sound insulation of Acoustique - Mesurage en laboratoire de l'isolation
building elements - Part 3: Measurement of impact sound acoustique des éléments de construction - Partie 3:
insulation (ISO 10140-3:2010/DAM 3:2013) Mesurage de l'isolation au bruit de choc (ISO 10140-
3:2010/DAM 3:2013)
Dieser Änderungs-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen Komitee CEN/TC 126
erstellt.

Dieser Entwurf für eine Änderung A3 wird, wenn er angenommen ist, die Europäische Norm EN ISO 10140-3:2010 modifizieren. Wenn aus
diesem Änderungs-Entwurf eine Änderung wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu erfüllen, in der die
Bedingungen festgelegt sind, unter denen diese Änderung in der betreffenden nationalen Norm, ohne jede Änderung, einzufügen ist.

Dieser Änderungs-Entwurf wurde vom CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine Fassung in einer
anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem
Management-Zentrum des CEN-CENELEC mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen jugoslawischen
Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta,
den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der
Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen, mitzuteilen
und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2013 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN ISO 10140-3:2010/prA3:2013 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.

---------------------- Page: 3 ----------------------

SIST EN ISO 10140-3:2010/oprA3:2013
EN ISO 10140-3:2010/prA3:2013 (D)
Inhalt
Seite
5.4 Korrektur der Luftschallübertragung.4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10140-3:2010/oprA3:2013
EN ISO 10140-3:2010/prA3:2013 (D)
Vorwort
Dieses Dokument (EN ISO 10140-3:2010/prA3:2013) wurde vom Technischen Komitee ISO/TC 43
„Acoustics“ in Zusammenarbeit mit dem Technischen Komitee CEN/TC 126 „Akustische Eigenschaften von
Bauteilen von Gebäuden“ erarbeitet, dessen Sekretariat vom AFNOR gehalten wird.
Dieses Dokument ist derzeit zur parallelen Umfrage vorgelegt.
Anerkennungsnotiz
Der Text von ISO 10140-3:2010/DAM 3:2013 wurde vom CEN als EN ISO 10140-3:2010/prA3:2013
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16032:2024(Main)
Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method (ISO 16032:2024)
kSIST FprEN ISO 16032:2024

This document specifies an engineering method for the measurement of sound pressure levels in rooms from service equipment installed in the building.
This document covers specifically measurements of sound from sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, heating devices, blowers, pumps and other auxiliary service equipment, and motor driven car park doors. It can also be applied to measurements of sounds from other types of equipment or activities within the building, e.g. noise from sport facilities or restaurants.
The measurement of noise from external sound sources generating air-borne or ground-borne noise in the building are not included in this document.
The methods are suitable for rooms with volumes of approximately 300 m3 or less for instance, in dwellings, hotels, schools, offices and hospitals.
The methods are not intended for measurements in large auditoria or concert halls.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12354-5:2023(Main)
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment
SIST EN 12354-5:2023

This document describes calculation models to estimate the sound pressure level in buildings due to service equipment. As for the field measurement documents (EN ISO 16032 for the engineering method and EN ISO 10052 for the survey method), it covers sanitary installations, mechanical ventilation, heating and cooling, service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor driven car park doors, but can also be applied to others equipment attached to or installed in buildings. The estimation is generally based on measured data that characterizes both the equipment (source) and the sound transmission through the building. The same equipment can be composed of different airborne and/or structure borne sources at different locations in the building; the standard gives some information on these sources and how they can be characterized; however, models of the equipment itself are out of the scope of this standard.
This document describes the principles of the calculation models, lists the relevant input and output quantities and defines its applications and restrictions. The models given are applicable to calculations in frequency bands. It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building construction, considering local circumstances.
The calculation models described use the most general approach for engineering purposes, with a link to measurable input quantities that specify the performance of building elements and equipment. However, it is important for users to be aware that other calculation models also exist, each with their own applicability and restrictions.
The models are based on experience with predictions for dwellings and offices; they could also be used for other types of buildings provided the dimensions of constructions are not too different from those in dwellings.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3382-3:2022(Main)
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2022)
SIST EN ISO 3382-3:2022

This document specifies a method for the measurement of room acoustic parameters in unoccupied open-plan offices. It specifies measurement procedures, the apparatus needed, the coverage required, the method for evaluating the data, and the presentation of the test report.
This document describes a group of single-number quantities indicating the room acoustic performance of an open-plan office in a condition when one person is speaking. They focus on spatial decay of speech while the quantities in ISO 3382-2 focus on temporal decay of sound.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10052:2021(Main)
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)
SIST EN ISO 10052:2021

This document specifies field survey methods for measuring
a) airborne sound insulation between rooms,
b) impact sound insulation of floors,
c) airborne sound insulation of façades, and
d) sound pressure levels in rooms caused by service equipment.
The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3.
For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft impact sound insulation, the results also are given as A-weighted maximum impact sound pressure level. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-1:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)
SIST EN ISO 10140-1:2021

This document specifies test requirements for the laboratory measurement of the sound insulation of building elements and products, including detailed requirements for the preparation and mounting of the test elements, and for the operating and test conditions. It also specifies the applicable quantities, and provides additional test information for reporting.
The general procedures for airborne and impact sound insulation measurements are given in ISO 10140‑2 and ISO 10140-3, respectively.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-4:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
SIST EN ISO 10140-4:2021

This document specifies the basic measurement procedures for airborne and impact sound insulation of building elements in laboratory test facilities.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-3:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
SIST EN ISO 10140-3:2021

This document specifies laboratory methods for measuring the impact sound insulation of floor assemblies.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.
The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor.
A test method is specified that uses the standard tapping machine (see ISO 10140-5:2021, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. Alternative test methods, using a modified tapping machine or a heavy/soft impact source (see ISO 10140-5:2021, Annex F) to simulate impact sources with strong low frequency components, such as human footsteps (bare feet) or children jumping, are also specified.
This document is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test methods apply only to laboratory measurements.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-5:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
SIST EN ISO 10140-5:2021

This document specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as:
—    components and materials;
—    building elements;
—    technical elements (small building elements);
—    sound insulation improvement systems.
It is applicable to laboratory test facilities with suppressed radiation from flanking elements and structural isolation between source and receiving rooms.
This document specifies qualification procedures for use when commissioning a new test facility with equipment for sound insulation measurements. It is intended that these procedures be repeated periodically to ensure that there are no issues with the equipment and the test facility.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-2:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)
SIST EN ISO 10140-2:2021

This document specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.
The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions and total loss factor.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 717-1:2020(Main)
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
SIST EN ISO 717-1:2021

This document
a)   defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows,
b)   takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building, and
c)   gives rules for determining these quantities from the results of measurements carried out in one-third-octave or octave bands for example in accordance with ISO 10140-2 and ISO 16283-1.
The single-number quantities in accordance with this document are intended for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands.
For laboratory measurements made in accordance with ISO 10140-2, single-number quantities are calculated using one-third-octave bands only.
The rating of results of measurements carried out over an enlarged frequency range is dealt with in Annex B.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day