EN ISO 9455-16:2001

Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998)

This part of EN ISO 9455 specifies a method for the assessment of the efficacy of a soft soldering flux, known as the wetting balance method.

Flussmittel zum Weichlöten - Prüfverfahren - Teil 16: Bestimmung der Wirksamkeit des Flussmittels, Verfahren zur Messung der Benetzungskraft (ISO 9455-16:1998)

Dieser Teil der ISO 9455 legt ein Verfahren zum Beurteilen der Wirksamkeit eines Flussmittels zum Weichlöten fest, das als Verfahren zur Messung der Benetzungskraft bezeichnet wird. Es bietet eine qualitative Beurteilung für den Vergleich der Wirksamkeit zweier Flussmittel (z. B. ein Standard-Flussmittel mit einem zu prüfenden Fluss-mittel) hinsichtlich ihrer Fähigkeiten die Benetzung einer Metalloberfläche durch ein flüssiges Weichlot zu fördern. Das Verfahren ist für alle flüssigen Flussmitteltypen anwendbar, die in ISO 9454-1 aufgeführt sind.
ANMERKUNG   Es ist anzunehmen, dass zukünftige Entwicklungen mit verbesserten Verfahren einen reproduzierbaren Oberflächenbereich zum Prüfen ergeben, die es möglich machen, dieses Verfahren zum Beurteilen der Flussmittelwirksamkeit quantitativ einzusetzen. Aus diesem Grund sind verschiedene alterna-tive Verfahren zur Vorbereitung der Prüfstückoberfläche in der vorliegenden Norm enthalten.

Flux de brasage tendre - Méthodes d'essai - Partie 16: Essais d'efficacité des flux, méthode à la balance de mouillage (ISO 9455-16:1998)

La présente partie de l'ISO 9455 prescrit une méthode pour l'évaluation de l'efficacité d'un flux de brasage tendre, connue sous le nom de méthode à la balance de mouillage. Elle permet une évaluation qualitative de l'efficacité de deux flux faisant l'objet d'une comparaison (par exemple un flux de référence et un flux d'essai), évaluation fondée sur la capacité de ces flux à faciliter le mouillage de la surface d'un métal par le produit d'apport liquide. Cette méthode est applicable à tous les types de flux sous forme liquide classés dans l'ISO 9454-1.
NOTE Il est souhaitable que de futurs développements, bénéficiant du progrès technique pour obtenir une gamme de surfaces d'essai reproductibles, permettront à cette méthode d'évaluation de l'efficacité des flux de fournir des résultats quantitatifs. C'est pourquoi plusieurs autres modes opératoires de préparation de la surface de la pièce d'essai sont inclus dans la présente méthode.

Talila za mehko spajkanje - Preskusne metode - 16. del: Preskus učinkovitosti, postopek za merjenje omočljivosti (ISO 9455-16:1998)

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2001
• Withdrawal Date: 16-Apr-2013
• ICS: 25.160.50 - Brazing and soldering
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Apr-2013
• Completion Date: 17-Apr-2013
• Ref Project: SIST EN ISO 9455-16:2002 - Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998)

Relations

• Replaced By: EN ISO 9455-16:2013 - Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2013)
• Effective Date: 06-May-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9455-16:2002
01-maj-2002
7DOLOD]DPHKNRVSDMNDQMH3UHVNXVQHPHWRGHGHO3UHVNXVXþLQNRYLWRVWL
SRVWRSHN]DPHUMHQMHRPRþOMLYRVWL,62
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance
method (ISO 9455-16:1998)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 16: Bestimmung der Wirksamkeit des
Flussmittels, Verfahren zur Messung der Benetzungskraft (ISO 9455-16:1998)
Flux de brasage tendre - Méthodes d'essai - Partie 16: Essais d'efficacité des flux,
méthode a la balance de mouillage (ISO 9455-16:1998)
Ta slovenski standard je istoveten z: EN ISO 9455-16:2001
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-16:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9455-16:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 9455-16:2002
EUROPEAN STANDARD
EN ISO 9455-16
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 25.160.50
English version
Soft soldering fluxes - Test methods - Part 16: Flux efficacy
tests, wetting balance method (ISO 9455-16:1998)
Flux de brasage tendre - Méthodes d'essai - Partie 16: Flussmittel zum Weichlöten - Prüfverfahren - Teil 16:
Essais d'efficacité des flux, méthode à la balance de Bestimmung der Wirksamkeit des Flussmittels, Verfahren
mouillage (ISO 9455-16:1998) zur Messung der Benetzungskraft (ISO 9455-16:1998)
This European Standard was approved by CEN on 14 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-16:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9455-16:2002
EN ISO 9455-16:2001 (E)
CORRECTED  2002-09-18
Foreword
This document (EN ISO 9455-16:2001) has been prepared by Technical Committee ISO/TC
44 "Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of ISO 9455-16:1998 has been approved by CEN as EN ISO 9455-16:2001 without
any modifications.
NOTE  Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9455-16:2002
EN ISO 9455-16:2001 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 9453 1990 Soft soldering fluxes - Chemical compositions EN 29453 1993
and forms
ISO 9454-1 1990 Soft soldering fluxes - Classifi
...