iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 613:2000

(Main)

Independent gas-fired convection heaters

Independent gas-fired convection heaters

This European Standard specifies the requirements  and test methods for the construction, safety, marking and rational use of energy of independent gas-fired convection heating appliances, hereafter referred to as appliances.

Konvektions-Raumheizer für gasförmige Brennstoffe

Diese Europäische Norm legt Anforderungen und Prüfbestimmungen für Bau, Sicherheit, Kennzeichnung und rationelle Energienutzung von Konvektions- Raumheizern für gasförmige Brennstoffe fest, im folgenden als Gerät bezeichnet.

Appareils de chauffage indépendants à convection utilisant les combustibles gazeux

La présente norme européenne spécifie les exigences et méthodes d'essais pour la construction, la sécurité, le marquage et l'utilisation rationnelle de l'énergie des appareils de chauffage indépendants à convection utilisant les combustibles gazeux, appelés ci-après "appareils".

Prostostoječi plinski konvekcijski grelniki

General Information

Status
Withdrawn
Publication Date
12-Dec-2000
Withdrawal Date
21-Dec-2021
ICS
97.100.20 - Gas heaters
Technical Committee
CEN/TC 62 - Independent gas-fired space heaters
Drafting Committee
CEN/TC 62/WG 1 - EN-Convectors
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Dec-2021
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
90/396/EEC - Appliances burning gaseous fuels
Mandate
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
SIST EN 613:2002 - Independent gas-fired convection heaters

Relations

Replaced By
EN 613:2021 - Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters
Effective Date
29-Dec-2021
Amended By
EN 613:2000/A1:2003 - Independent gas-fired convection heaters
Effective Date
08-Jun-2022

Buy Standard

EN 613:2002EN 613:2002
PreviousNext
Standard
EN 613:2002
English language
139 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2002
3URVWRVWRMHþLSOLQVNLNRQYHNFLMVNLJUHOQLNL
Independent gas-fired convection heaters
Konvektions-Raumheizer für gasförmige Brennstoffe
Appareils de chauffage indépendants a convection utilisant les combustibl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 509:2024(Main)
Decorative fuel-effect gas appliances
kSIST FprEN 509:2024

This document specifies the requirements and test methods for the construction, safety, and marking of decorative fuel effect gas appliances not exceeding a nominal heat input of 20 kW (based on the net calorific value), thereafter referred to as appliances.
This document is applicable to appliances that are designed to simulate a solid fuel fire and incorporate a natural draught burner with or without an ignition burner, that uses one or more combustible gases of the three gas families at the pressures stated in EN 437:2021. The appliances are for decorative purposes only and are not heating appliances.
This document is applicable to type BAS, as described in 4.2, decorative fuel effect gas appliances that are designed to be installed within a non-combustible builder's opening or a non-combustible fireplace recess.
NOTE 1   This document specifies special national conditions in Annex C for appliances of category I2E+, marketed in Belgium.
NOTE 2   This document specifies special A-deviations in Annex D for appliances in Switzerland which require additional requirements for subclauses 6.6 and 6.7.
This document includes additional requirements for Type BBS appliances which are specified in Annex F.
In addition, this document is applicable to decorative fuel-effect gas appliances that are designed to be installed under a non-combustible canopy which is independent or integral with a flue box, for which additional requirements are specified in Annex A.
The use of toxic gases is not covered.
This document is not applicable to:
-   catalytic combustion appliances;
-   appliances in which the supply of combustion air and/or the evacuation of products of combustion is achieved by mechanical means.
NOTE 3   Requirements concerning the rational use of energy have not been included in this document, because the appliances are for decorative purposes.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 613:2021(Main)
Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters
SIST EN 613:2022

This document specifies the requirements and test methods for the construction, safety, marking and rational use of energy.
This document is applicable to types B11AS, B11BS, B11CS, C11, C31 and C91 appliances (see 4.2) and those that:
—   are closed-fronted;
—   incorporate a natural draught burner;
—   are connected directly to an open flue or to a device to evacuate the products of combustion (open-flued appliances, balanced-flued appliances);
—   are wall mounted, free-standing or built-in;
—   have a nominal heat input not exceeding 20 kW (based on the net calorific value).
This document is not applicable to:
—   open fronted appliances as specified in EN 13278:2013;
—   decorative fuel effect appliances as specified in EN 509:1999/A1:2003;
—   catalytic combustion appliances;
—   appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266:2002;
—   ducted-air appliances;
—    appliances installed by means of a closure plate (see 3.3.3.3).
Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13278:2013(Main)
Open fronted gas-fired independent space heaters
SIST EN 13278:2014

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of open fronted gas-fired independent space heaters with and without a fan to assist with the transportation of flue gases, hereafter referred to as appliances. Although the fan may be mounted outdoors, this standard only covers appliances where the body of the appliance is indoors.
This standard applies to types B11AS, B11BS, B14AS, and B14BS (commonly referred to in this standard as type B1 appliances) open fronted gas-fired independent space heating appliances:
-   that incorporate an atmospheric burner;
-   that are connected directly to an open flue (see Figure 1), or to a device to evacuate the products of combustion (open-flued appliances);
-   that have a nominal heat input not exceeding 20 kW (based on the net calorific value);
-   that are delivered with the gas-carrying components, burner(s), combustion chamber and heat exchanger fully assembled.
It does not apply to:
-   closed-fronted appliances;
-   decorative fuel effect appliances as specified in EN 509;
-   catalytic combustion appliances;
-   ducted-air appliances;
-   appliances installed by means of a closure plate (see 3.3.3.3).

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14829:2007(Main)
Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
SIST EN 14829:2008

This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2nd and 3rd family gas-fired domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value).
It covers the following Type AAS fixed flueless heaters:
NOTE   These are type A appliances fitted with an atmosphere sensing device, with or without a fan.
a)   heaters with or without a catalytic converter;
b)   Category 1 appliances burning gases of the second family;
c)   Category 2 appliances burning gases of the second and third families.
It does not cover
i.   Mobile heaters.
ii.   Category 1 appliances burning gases of the third family.
iii.   Portable flueless heaters.
iv.   Diffusive catalytic combustion heaters.
There are no specific thermal efficiency requirements appropriate to these types of appliance as:
   All the heat produced by the combustion process is released into the space to be heated.
   The requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas.
This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14438:2006(Main)
Gas-fired insets for heating more than one room
SIST EN 14438:2007

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material.
This European Standard is intended to be used in conjunction with EN 613:2000.
This European Standard is applicable to type B11BS insets burning gas:
   that incorporate an atmospheric burner;
   that are installed directly to an open flue or to a device to evacuate the products of combustion;
   that have a nominal heat input not exceeding 20 kW (based on the net calorific value).
In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect.
This European Standard is not applicable to:
   open fronted appliances as specified in EN 13278;
   decorative fuel effect appliances as specified in EN 509;
   convection heating appliances as specified in EN 613;
   catalytic combustion appliances;
   appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266;
   warm air heaters (which are subject of CEN/TC 180).
This European Standard is only applicable to insets which are intended to be type tested.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1266:2002/A1:2005(Amendment)
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
SIST EN 1266:2004/A1:2005

To include: Updated references; technical changes resulting from the study of Formal Vote comments.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1266:2002(Main)
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
SIST EN 1266:2004

This European standard specifies the requirements and test methods for construction, safety, fitness for purpose, rational use of energy, classification and marking of gas-fired convection heating appliances that are fitted with fan-assisted atmospheric burners, and fully pre-mixed burners. This European standard applies to independent convection heaters, burning gas having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as 'appliances'.

  • Standard
    137 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 509:2024(Main)
Decorative fuel-effect gas appliances
kSIST FprEN 509:2024

This document specifies the requirements and test methods for the construction, safety, and marking of decorative fuel effect gas appliances not exceeding a nominal heat input of 20 kW (based on the net calorific value), thereafter referred to as appliances.
This document is applicable to appliances that are designed to simulate a solid fuel fire and incorporate a natural draught burner with or without an ignition burner, that uses one or more combustible gases of the three gas families at the pressures stated in EN 437:2021. The appliances are for decorative purposes only and are not heating appliances.
This document is applicable to type BAS, as described in 4.2, decorative fuel effect gas appliances that are designed to be installed within a non-combustible builder's opening or a non-combustible fireplace recess.
NOTE 1   This document specifies special national conditions in Annex C for appliances of category I2E+, marketed in Belgium.
NOTE 2   This document specifies special A-deviations in Annex D for appliances in Switzerland which require additional requirements for subclauses 6.6 and 6.7.
This document includes additional requirements for Type BBS appliances which are specified in Annex F.
In addition, this document is applicable to decorative fuel-effect gas appliances that are designed to be installed under a non-combustible canopy which is independent or integral with a flue box, for which additional requirements are specified in Annex A.
The use of toxic gases is not covered.
This document is not applicable to:
-   catalytic combustion appliances;
-   appliances in which the supply of combustion air and/or the evacuation of products of combustion is achieved by mechanical means.
NOTE 3   Requirements concerning the rational use of energy have not been included in this document, because the appliances are for decorative purposes.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16830:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
SIST EN 16830:2022

This document specifies the safety, design, construction, performance requirements and testing of Temperature Control Functions (TCF) and Combustion Product Discharge Safety Devices (TTB) for gas and liquid fuel burners and appliances burning one or more gaseous or liquid fuels, hereafter referred to as ‘TCF’ or ‘TTB’.
It also describes the test procedures for checking compliance with these requirements.
This document is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks, see Annex I).
This document is applicable to electronically based TTB and TCF only.
For both TTB and TCF, the requirements in this document are applicable to the combination of sensing element and control.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 613:2021(Main)
Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters
SIST EN 613:2022

This document specifies the requirements and test methods for the construction, safety, marking and rational use of energy.
This document is applicable to types B11AS, B11BS, B11CS, C11, C31 and C91 appliances (see 4.2) and those that:
—   are closed-fronted;
—   incorporate a natural draught burner;
—   are connected directly to an open flue or to a device to evacuate the products of combustion (open-flued appliances, balanced-flued appliances);
—   are wall mounted, free-standing or built-in;
—   have a nominal heat input not exceeding 20 kW (based on the net calorific value).
This document is not applicable to:
—   open fronted appliances as specified in EN 13278:2013;
—   decorative fuel effect appliances as specified in EN 509:1999/A1:2003;
—   catalytic combustion appliances;
—   appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266:2002;
—   ducted-air appliances;
—    appliances installed by means of a closure plate (see 3.3.3.3).
Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day