EN 60034-5:2001/A1:2007

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

IEC published without FDIS stage

Drehende elektrische Maschinen - Teil 5: Schutzarten aufgrund der Gesamtkonstruktion von drehenden elektrischen Maschinen (IP-Code) - Einteilung

Machines électriques tournantes - Partie 5: Degrés de protection procurés par la conception intégrale des machines électriques tournantes (code IP) - Classification

Električni rotacijski stroji - 5. del: Stopnja zaščite, ki jo zagotavlja celovita zasnova rotacijskih električnih strojev (koda IP) - Razvrščanje (IEC 60034-5:2000/A1:2006)

Nanaša se na klasifikacijo stopenj zaščite, ki se zagotovlja z ohišjem za rotacijske električne stroje. Določa zahteve za zaščitna ohišja, ki so v vseh pogledih primerne za njihovo uporabo in ki glede na materiale in izdelavo zagotavljajo, da so izdelki, omenjeni v tem standardu, vzdrževani pod normalnimi pogoji uporabe.

General Information

• Status: Withdrawn
• Publication Date: 04-Jan-2007
• Withdrawal Date: 30-Nov-2009
• ICS: 29.160 - Rotating machinery
• Technical Committee: CLC/TC 2 - Rotating machinery
• Drafting Committee: IEC/TC 2 - IEC_TC_2
• Parallel Committee: IEC/TC 2 - IEC_TC_2
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Jun-2023
• Completion Date: 03-Jun-2023
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60034-5:2002/A1:2007 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2000/A1:2006)

Relations

• Replaced By: EN IEC 60034-5:2020 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
• Effective Date: 23-Jun-2020
• Amends: EN 60034-5:2001 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2007
5RWDFLMVNLHOHNWULþQLVWURMLGHO6WRSQMD]DãþLWHNLMR]DJRWDYOMDFHORYLWD]DVQRYD
URWDFLMVNLKHOHNWULþQLKVWURMHYNRGD,35D]YUãþDQMH,(&$
Rotating electrical machines - Part 5: Degrees of protection provided by the integral
design of rotating electrical machines (IP code) - Classification (IEC 60034-
5:2000/A1:2006)
Drehende elektrische Maschinen - Teil 5: Schutzarten aufgrund der Gesamtkonstruktion
von drehenden elektrischen Maschinen (IP-Code) - Einteilung (IEC 60034-
5:2000/A1:2006)
Machines électriques tournantes - Partie 5: Degrés de protection procurés par la
conception intégrale des machines électriques tournantes (code IP) - Classification (CEI
60034-5:2000/A1:2006)
Ta slovenski standard je istoveten z: EN 60034-5:2001/A1:2007
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60034-5/A1
NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM
ICS 29.160
English version
Rotating electrical machines
Part 5: Degrees of protection provided by the integral design
of rotating electrical machines (IP code) -
Classification
(IEC 60034-5:2000/A1:2006)
Machines électriques tournantes  Drehende elektrische Maschinen
Partie 5: Degrés de protection procurés Teil 5: Schutzarten aufgrund der
par la conception intégrale des machines Gesamtkonstruktion von drehenden
électriques tournantes (code IP) - elektrischen Maschinen (IP-Code) -
Classification Einteilung
(CEI 60034-5:2000/A1:2006) (IEC 60034-5:2000/A1:2006)

This amendment A1 modifies the European Standard EN 60034-5:2001; it was approved by CENELEC on
2006-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-5:2001/A1:2007 E

Foreword
The text of document 2/1378/CDV, future amendment 1 to IEC 60034-5:2000, prepared by IEC TC 2,
Rotating machinery, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was
approved by CENELEC as amendment A1 to EN 60034-5:2001 on 2006-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level
...