prEN IEC 62841-2-22:2024/prAA:2024
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-22: Exigences particulières pour les tronçonneuses portatives - Amendement
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-22. del: Posebne zahteve za ročne rezalne stroje - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
22. del: Posebne zahteve za ročne rezalne stroje - Dopolnilo AA
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 2-22: Exigences particulières pour les tronçonneuses portatives -
Amendement
Ta slovenski standard je istoveten z: prEN IEC 62841-2-22:2024/prAA:2024
ICS:
25.140.20 Električna orodja Electric tools
oSIST prEN IEC 62841-2- en
22:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 62841-2-22
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
April 2024
ICS -
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-22: Particular
requirements for hand-held cut-off machines
To be completed To be completed
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62841-2-22; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-06-21.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79662 Ref. No. prEN IEC 62841-2-22:2024/prAA:2024 E
1 Contents Page
2 1 Modifications to Clause 2, “Normative references” . 5
3 2 Modification to Clause 8, “Marking and instructions” . 5
4 3 Modification to Clause 14, “Moisture resistance” . 5
5 4 Addition to Clause 21, “Construction” . 5
6 5 Modifications to Clause 24 “Supply connection and external flexible cords” . 5
7 6 Modification to Annex I, “Measurement of noise and vibration emissions” . 5
8 7 Modification to Annex K, “Battery tools and battery packs” . 5
9 8 Modification to Annex L, “Battery tools and battery packs provided with mains connection
10 or non-isolated sources“ . 6
11 9 Addition of the Annex ZA, “Normative references to international publications with their
12 corresponding European publications” . 7
13 10 Addition of the Annex ZZ, “Relationship between this European Standard and the essential
14 requirements of Directive 2006/42/EC aimed to be covered” . 9
15 European foreword
16 This document (prEN IEC 62841-2-22:2024/prAA:2024) has been prepared by CLC/TC 116 “Safety and
17 environmental aspects of motor-operated electric tools”.
18 This document is currently submitted to the Enquiry.
19 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 48 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
20 This document modifies by common modifications prEN IEC 62841-2-22:2024, which consists of the text of
21 116/xxx/CDV (future IEC 62841-2-22, Ed. 1) prepared by IEC/TC 116 “Safety of motor-operated electric tools”.
22 If approved, this draft amendment will be published as EN IEC 62841-2-22:202x/A11:202x.
23 This series is divided into four parts.
24 Part 1: General requirements which are common to most hand-held electric motor operated tools (for the
25 purpose of this document referred to simply as tools) which could come within the scope of this document;
26 Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements
27 given in Part 1 to account for the particular hazards and characteristics of these specific tools.
28 Part 2-22 is used in conjunction with EN 62841-1:2015 and its amendments.
29 Part 2-22 supplements or modifies the corresponding clauses in EN 62841-1:2015 and its amendments, so as
30 to convert it into the European Standard: Particular requirements for hand-held cut-off machines.
31 Where a particular subclause of Part 1 is not mentioned in the Part 2-22, that subclause applies as far as
32 relevant. When this document states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to
33 be adapted accordingly.
34 The following print types are used:
35 — requirements; in roman type;
36 — test specifications: in italic type;
37 — notes: in smaller roman type.
38 The terms defined in Clause 3 are printed in bold typeface.
39 Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101.
40 Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-22:202x
41 are prefixed “Z”.
42 This document follows the overall requirements of EN ISO 12100.
43 This document has been prepared under a standardization request addressed to CENELEC by the European
44 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
45 Member States.
46 For relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this document.
47 Compliance with the clauses of Part 1 together with Part 2-22 provides one means of conforming with the
48 essential health and safety requirements of the Directive concerned.
49 1 Modifications to Clause 2, “Normative references”
50 Replace the normative reference ISO 603-15:1999 with the following:
51 ISO 603-15:2022, Bonded abrasive products — Dimensions — Part 15: Cutting-off wheels on stationary or
52 mobile cutting-off machines
53 Replace the normative reference ISO 603-16:1999 with the following:
54 ISO 603-16:2022, Bonded abrasive products — Dimensions — Part 16: Cutting-off wheels on hand held power
55 tools
56 2 Modification to Clause 8, “Marking and instructions”
57 Delete NOTE 101 in subclause 8.2.
58 3 Modification to Clause 14, “Moisture resistance”
59 Delete NOTE 2 and NOTE 3 in subclause 14.5.
60 4 Addition to Clause 21, “Construction”
61 Delete NOTE 101 in subclause 21.18.1.
62 5 Modifications to Clause 24 “Supply connection and external flexible cords”
63 Replace the existing subclause 24.4 with the following:
64 “For tools with a rated capacity greater than 155 mm, the supply cord shall be not lighter than heavy
65 polychloroprene or PUR sheathed flexible cord (code designation 60245 IEC 66, H07RN-F or H07BQ-F) or
66 equivalent.
67 Compliance is checked by inspection and by measurement.”
68 6 Modification to Annex I, “Measurement of noise and vibration emissions”
69 Replace the title of Annex I with the following:
70 “Annex I
71 (normative)
73 Measurement of noise and vibration emissions”
74 and delete the NOTE.
75 7 Modification to Annex K, “Battery tools and battery packs”
76 Replace the NOTE 2 after K.21.18.1.1 with the following normative tex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.