CLC/TR 45550:2020
(Main)Definitions related to material efficiency
Definitions related to material efficiency
Standardisation Request M/543 requires the following: "Definition of parameters and methods relevant for assessing durability, upgradability and ability to repair, re-use and re-manufacture of products". Hence, this Technical Report "Definitions related to material efficiency" will constitute a collection of common terms used in deliverables prepared in accordance with M/543. The purpose of such a collection is to provide a single definition of key terms used in different deliverables from the CEN-CENELEC TC10. The source of the terms and definitions can be documents developed in the various working groups of the CEN-CENELEC TC10 or any text referenced by such documents. In case of discrepancies between multiple definitions for the same term, this Technical report will recommend a preferred definition.
Definitionen zur Materialeffizienz
Définitions relatives à l’utilisation rationnelle des matériaux
Le présent document fournit un recueil de tous les termes dont l’utilisation a été convenue dans les normes CEN-CLC, dans la série de normes 45552 - 45559. Ces termes sont destinés à être utilisés dans d’autres normes sur l’utilisation rationnelle des matériaux, élaborées à partir des normes CEN-CLC, dans la série de normes 45552 - 45559, ou destinées à compléter cette série. Ils constituent également la base de l’élaboration de nouvelles définitions utilisées dans les normes spécifiques à un produit relatives à l’utilisation rationnelle des matériaux.
Definicije, povezane z učinkovitostjo materiala
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2021
Definicije, povezane z učinkovitostjo materiala
Definitions related to material efficiency
Definitionen zur Materialeffizienz
Définitions relatives à l’utilisation rationnelle des matériaux
Ta slovenski standard je istoveten z: CLC/TR 45550:2020
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT CLC/TR 45550
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
December 2020
ICS 01.040.13; 13.020.20
English Version
Definitions related to material efficiency
Définitions relatives à l'utilisation rationnelle des matériaux Definitionen zur Materialeffizienz
This Technical Report was approved by CEN and CENELEC on 30 November 2020.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and United Kingdom
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELEC CENELEC Members.
Ref. No. CLC/TR 45550:2020 E
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Terms and definitions related to material efficiency . 5
4.1 General . 5
4.2 Terms and definitions related to the general method for the assessment of the durability of
energy-related products (from EN 45552:2020) . 5
4.2.1 Terms related to durability and reliability . 5
4.2.2 Terms related to functions . 6
4.2.3 Terms related to the uses . 7
4.2.4 Other terms. 7
4.3 Terms and definitions related to the general method for the assessment of the ability to
remanufacture energy-related products (from EN 45553:2020). 8
4.4 Terms and definitions related to the general methods for the assessment of the ability to
repair, reuse and upgrade energy-related products (from EN 45554:2020) . 8
4.5 Terms and definitions related to the general methods for assessing the recyclability and
recoverability of energy-related products (from EN 45555:2019) . 9
4.6 Terms and definitions related to the general method for assessing the proportion of reused
components in energy-related products (from EN 45556) .10
4.7 Terms and definitions related to the general method for assessing the proportion of
recycled material content in energy-related products (from EN 45557:2020) .11
4.7.1 Definitions related to materials .11
4.7.2 Other definitions .11
4.8 Terms and definitions related to the general method to declare the use of critical raw
materials in energy-related products (from EN 45558:2019) .12
4.9 Terms and definitions related to the methods for providing information relating to material
efficiency aspects of energy-related products (from EN 45559:2019) .14
Annex A (Informative) Alphabetic index of terms .15
Bibliography .16
European foreword
This document (CLC/TR 45550:2020) has been prepared by CEN-CLC/JTC 10 “Energy-related products -
Material Efficiency Aspects for Ecodesign”, the secretariat of which is held by The Netherlands.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
The dual logo CEN-CENELEC standardization deliverables, in the numerical range of 45550 – 45559, have
been developed under standardization request M/543 of the European Commission and are intended to
potentially apply to any product within the scope of the Directive 2009/125/EC concerning energy-related
products (ErP).
Topics covered in the above standardization request are linked to the following material efficiency aspects:
a) Extending product lifetime;
b) Ability to reuse components or recycle materials from products at end-of-life;
c) Use of reused components and/or recycled materials in products.
These standards are general in nature and describe or define fundamental principles, concepts, terminology or
technical characteristics. They can be cited together with other product publications, e.g. developed by product
technical committees.
This document is intended to be used by technical committees when producing horizontal, generic, and product-
specific, or product-group, publications.
NOTE CEN-CENELEC JTC 10 uses either CEN or CENELEC foreword templates, as appropriate. The template for
the current document is correct at the time of publication.
Introduction
When multiple groups work in parallel on different but closely related topics, it is important to have a common
vocabulary to avoid confusing the reader.
Given the extent of Standardization Request M/543 in terms of product coverage and number of deliverables,
a common vocabulary is a key asset for all involved parties. Therefore, Standardization Request M/543 requires
the following: “Definition of parameters and methods relevant for assessing durability, upgradability and ability
to repair, re-use and re-manufacture of products”.
This Technical Report “Definitions related to material efficiency” constitutes a collection of common terms used
in deliverables prepared in accordance with Standardization Request M/543. The purpose of such a collection
is to provide a single definition of key terms used in different standards developed under M/543.
The source of the terms and definitions is the standards developed under M/543 or any other document
referenced by such standards.
Whenever possible, the proposed definitions are consistent with the ones given in European and International
standards dealing with environmental aspects of products in scope of M/543.
1 Scope
This document provides a compendium of all terms which been agreed for use in CEN-CLC standards, in the
numerical range of 45552-45559.
Such terms are intended to be used in other standards about material efficiency, developed based on CEN-
CLC standards, in the numerical range of 45552-45559, or intended to complement that series. They also
constitute the basis for development of new definitions used in product-specific material efficiency standards.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at http://www.electropedia.org/
4 Terms and definitions related to material efficiency
4.1 General
Terms and definitions in following subsections are sorted according to the various topics covered in CEN-CLC
standards, in the numerical range of 45552-45559.
Note 1: terms are listed under the CEN-CLC standard (from the numerical range of 45552-45559) where they were first
defined or referenced from other CEN-CLC standards (outside the numerical range of 45552-45559).
Note 2: terms having their source of definition in another CEN-CLC standard from the numerical range of 45552-45559 are
not repeated, unless the context requires minor adaptation of the definition.
4.2 Terms and definitions related to the general method for the assessment of the durability
of energy-related products (from EN 45552:2020)
4.2.1 Terms related to durability and reliability
4.2.1.1
durability
ability to function as required, under defined conditions of use, maintenance and repair, until a limiting state is
reached
Note 1 to entry: The degree to which maintenance and repair are within the scope of durability will vary by product or
product-group.
Note 2 to entry: The user of EN 45552:2020 has to define the criteria for the transition from limiting state to end-of-life
(EoL). For more information see Figure D.1 in EN 45552:2020 [13].
Note 3 to entry: Durability can be expressed in units appropriate to the part or product concerned, e.g. calendar time,
operating cycles, distance run, etc. The units should always be clearly stated.
4.2.1.2
reliability
probability that a product functions as required under given conditions, including maintenance, for a given
duration without limiting event
Note 1 to entry: The intended function(s) and given conditions are described in the information for use provided with the
product.
Note 2 to entry: Duration can be expressed in units appropriate to the part or product concerned, e.g. calendar time,
operating cycles, distance run, etc. The units should always be clearly stated.
4.2.1.3
limiting event
occurrence which results in a primary or secondary function no longer being delivered
Note 1 to entry: Examples of limiting events are failure, wear-out failure or deviation of any analogue signal.
4.2.1.4
limiting state
condition after one or more limiting event(s)
Note 1 to entry: A limiting state can be changed to a functional state by maintenance or repair of the ErP.
Note 2 to entry: A limiting state can change to EoL-status, if maintenance or repair is no longer viable due to socio-
economic or technical reasons.
4.2.1.5
wear-out failure
failure due to cumulative deterioration caused by the stresses imposed in normal use
Note 1 to entry: The probability of occurrence of a wear-out failure typically increases with the accumulated operating time,
number of operations, and/or stress applications.
Note 2 to entry: In some instances, it may be difficult to distinguish between wear-out and ageing phenomena.
[SOURCE: IEV 192-03-15]
4.2.2 Terms related to functions
4.2.2.1
primary function
function fulfilling the intended use
Note 1 to entry: There can be more than one primary function.
4.2.2.2
secondary function
function that enables, supplements or enhances the primary function(s)
[SOURCE: EN 62542:2017; 5.14]
4.2.2.3
tertiary function
function other than a primary or a secondary function
[SOURCE: EN 62542:2017; 5.16, modified examples deleted]
4.2.2.4
functional analysis
process that describes the functions of a product and their relationships, which are systematically characterised,
classified and evaluated
4.2.3 Terms related to the uses
4.2.3.1
normal use
use of a product, including its transport and storage, or a process, in accordance with the provided information
for use or, in the absence of such, in accordance with generally understood patterns of usage
Note 1 to entry: Normal use should not be confused with intended use. While both include the concept of use as intended
by the manufacturer, intended use focuses on the purpose while normal use incorporates not only the purpose, but transport
and storage as well.
[SOURCE: IEV 871-04-22]
4.2.3.2
intended use
use in accordance with information provided with a product or system, or, in absence of such information, by
generally understood patterns of usage
Note 1 to entry: Intended use should not be confused with normal use. While both include the concept of use as intended
by the manufacturer, intended use focuses on the purpose while normal use incorporates not only the purpose, but transport
and storage as well.
[SOURCE: ISO/IEC Guide 51:2014; 3.6, modified Note 1 to entry added]
4.2.3.3
normal operating conditions
characteristic in operation which may affect performance of the prod
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.