EN 55016-2-3:2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Supersedes EN 55016-2-3:2006

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-3: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messung der gestrahlten Störaussendung

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3: Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations rayonnées

Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti - 2-3. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje sevanih motenj

Ta del CISPR 16 je določen kot osnovni standard, ki opredeljuje metode za  merjenje odpornosti na EMC fenomen v frekvenčnem razponu od 9 kHz do 18 GHz.

General Information

• Status: Withdrawn
• Publication Date: 03-Jun-2010
• Withdrawal Date: 31-May-2013
• ICS: 33.100.10 - Emission
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Parallel Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Apr-2020
• Completion Date: 28-Apr-2020
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 55016-2-3:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Relations

• Replaces: CLC/TS 50217:2005 - Guide for in situ measurements - In situ measurement of disturbance emission
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-2-3:2006 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 29-Jan-2023
• Replaced By: EN 55016-2-3:2017 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 21-Apr-2015
• Amended By: EN 55016-2-3:2010/A2:2014 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 28-Jan-2023
• Amended By: EN 55016-2-3:2010/A1:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 28-Jan-2023
• Corrected By: EN 55016-2-3:2010/AC:2013 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 55016-2-3:2007
Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti -
2-3. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje sevanih
motenj
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance
measurements
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
2-3: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und
Störfestigkeit - Messung der gestrahlten Störaussendung
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3:
Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations
rayonnées
Ta slovenski standard je istoveten z: EN 55016-2-3:2010
ICS:
17.240 Merjenje sevanja Radiation measurements
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 55016-2-3
NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM
ICS 33.100.10; 33.100.20 Supersedes EN 55016-2-3:2006

English version
Specification for radio disturbance and immunity measuring apparatus
and methods -
Part 2-3: Methods of measurement of disturbances and immunity -
Radiated disturbance measurements
(CISPR 16-2-3:2010)
Spécifications des méthodes  Anforderungen an Geräte
et des appareils de mesure und Einrichtungen sowie Festlegung
des perturbations radioélectriques der Verfahren zur Messung
et de l'immunité aux perturbations der hochfrequenten Störaussendung
radioélectriques - (Funkstörungen) und Störfestigkeit -
Partie 2-3: Méthodes de mesure Teil 2-3: Verfahren zur Messung
des perturbations et de l'immunité - der hochfrequenten Störaussendung
Mesures des perturbations rayonnées (Funkstörungen) und Störfestigkeit -
(CISPR 16-2-3:2010) Messung der gestrahlten Störaussendung
(CISPR 16-2-3:2010)
This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55016-2-3:2010 E
Foreword
The text of document CISPR/A/886/FDIS, future edition 3 of CISPR 16-2-3, prepared by CISPR SC A,
Radio-interference measurements and statistical methods, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 55016-2-3 on 2010-06-01.
This European Standard supersedes EN 55016-2-3:2006.
This EN 55016-2-3:2010 includes the following significant technical changes with respect to
EN 55016-2-3:2006: addition of the measurand for radiated emissions measurements in an OATS and a
SAC in the range of 30 MHz to 1 000 MHz, and addition of a new normative annex on the determination
of suitability of spectrum analysers for compliance tests. Also, numerous maintenance items are
addressed to make the standard current with respect to other parts of the EN 55016 series.
It has the status of a basic EMC publication in accordance with IEC Guide 107, Electromagnetic
compatibility – Guide to the drafting of electromagnetic compatibility publications.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-03-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard CISPR 16-2-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[1] CISPR 11:2009 NOTE  Harmonized as EN 55011:2009 (modified).
1)
[3] CISPR 22:2008
NOTE  Harmonized as EN 55022:200X (modified).
[4] IEC 61140:2001 NOTE  Harmonized as EN 61140:2002 (not modified).
[6] ISO/IEC 17000:2004 NOTE  Harmonized as EN ISO/IEC 17000:2004 (not modified).
[7] IEC 61000-4-21 NOTE  Harmonized as EN 61000-4-21.
__________
1)
At draft stage.
- 3 - EN 55016-2-3:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

CISPR 14-1 2005 Electromagnetic compatibility - Requirements EN 55014-1 2006
for household appliances, electric tools and
similar apparatus -
Part 1: Emission
CISPR 16-1-1 - Specification for radio disturbance and EN 55016-1-1 -
immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring apparatus

CISPR 16-1-2 2003 Specification for radio disturbance and EN 55016-1-2 2004
immunity measuring apparatus and methods -
Part 1-2: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Conducted disturbances
CISPR 16-1-4 2010 Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and methods -
Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas and test
sites for radiated disturbance measurements

CISPR 16-2-1 2008 Specification for radio disturbance and EN 55016-2-1 2009
immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of
disturbances and immunity - Conducted
disturbance measurements
CISPR 16-4-1 - Specification for radio disturbance and - -
immunity measuring apparatus and methods -
Part 4-1: Uncertainties, statistics and limit
modelling - Uncertainties in standardized EMC
tests
CISPR 16-4-2 - Specification for radio disturbance and EN 55016-4-2 -
immunity measuring apparatus and methods -
Part 4-2: Uncertainties, statistics and limit
modelling - Uncertainty in EMC
measurements
CISPR/TR 16-4-5 - Specification for radio disturbance and - -
immunity measuring apparatus and methods -
Part 4-5: Uncertainties, statistics and limit
modelling - Conditions for the use of
alternative test methods
Publication Year Title EN/HD Year

IEC 60050-161 1990 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 161: Electromagnetic compatibility

IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test

IEC 61000-4-20 - Electromagnetic compatibility (EMC) - EN 61000-4-20 -
Part 4-20: Testing and measurement
techniques - Emission and immunity testing in
transverse electromagnetic (TEM)
waveguides
CISPR 16-2-3 ®
Edition 3.1 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Specification for radio disturbance and immunity measuring apparatus and
methods –
Part 2-3: Methods of measurement of disturbances and immunity – Radiated
disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l’immunité aux perturbations radioélectriques –
Partie 2-3: Méthodes de mesure des perturbations et de l'immunité –
Mesures des perturbations rayonnées

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CN
CODE PRIX
ICS 33.100.10; 33.100.20 ISBN 978-2-88912-123-6
– 2 – CISPR 16-2-3 © IEC:2010+A1:2010
CONTENTS
FOREWORD.7
1 Scope.10
2 Normative references .10
3 Terms and definitions .11
4 Types of disturbance to be measured .15
4.1 General .15
4.2 Types of disturbance .16
4.3 Detector functions .16
5 Connection of measuring equipment.16
6 General measurement requirements and conditions .17
6.1 General .17
6.2 Disturbance not produced by the equipment under test .17
6.2.1 General .17
6.2.2 Compliance (conformity assessment) testing .17
6.3 Measurement of continuous disturbance.17
6.3.1 Narrowband continuous disturbance .17
6.3.2 Broadband continuous disturbance.17
6.3.3 Use of spectrum analyzers and scanning receivers.18
6.4 Operating conditions of the EUT.18
6.4.1 Normal load conditions .18
6.4.2 The time of operation.18
6.4.3 Running-in time .18
6.4.4 Supply .18
6.4.5 Mode of operation.18
6.5 Interpretation of measuring results .18
6.5.1 Continuous disturbance .18
6.5.2 Discontinuous disturbance.19
6.5.3 Measurement of the duration of disturbance .19
6.6 Measurement times and scan rates for continuous disturbance .19
6.6.1 General .19
6.6.2 Minimum measurement times .19
6.6.3 Scan rates for scanning receivers and spectrum analyzers.20
6.6.4 Scan times for stepping receivers .21
6.6.5 Strategies for obtaining a spectrum overview using the peak detector .22
6.6.6 Timing considerations using FFT-based instruments .27
7 Measurement of radiated disturbances .30
7.1 Introductory remarks .30
7.2 Loop-antenna system measurements (9 kHz to 30 MHz) .31
7.2.1 General .31
7.2.2 General measurement
...