Function blocks - Part 2: Software tools requirements

defines requirements for software tools to support the following systems engineering tasks enumerated in Clause 1 of EN 61499-1: -the functional specification of resource types and device types; -the configuration, implementation, operation, and maintenance of distributed IPMCSs; - the specification of function block types; -the specification, analysis, and validation of distributed IPMCSs; -the exchange of information among software tools.

Funktionsbausteine für industrielle Leitsysteme - Teil 2: Anforderungen an Software-Werkzeuge

Blocs fonctionnels - Partie 2: Spécifications des outils logiciels

the specification of function block types; -the specification, analysis, and validation of distributed IPMCSs; -the exchange of information among software tools.

Funkcijski bloki - 2. del: Zahteve za programska orodja (IEC 61499-2:2005)

General Information

Status
Withdrawn
Publication Date
21-Aug-2005
Withdrawal Date
31-May-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Dec-2015
Completion Date
12-Dec-2015

Relations

Buy Standard

Standard
EN 61499-2:2006
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 61499-2:2004
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Funkcijski bloki - 2. del: Zahteve za programska orodja (IEC 61499-2:2005)Funktionsbausteine für industrielle Leitsysteme -- Teil 2: Anforderungen an Software-WerkzeugeBlocs fonctionnels -- Partie 2: Spécifications des outils logicielsFunction blocks -- Part 2: Software tools requirements35.240.50Uporabniške rešitve IT v industrijiIT applications in industry35.080Dokumentiranje razvoja programske opreme in sistemov (sistemska dokumentacija)Software development and system documentation25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61499-2:2005SIST EN 61499-2:2006en01-januar-2006SIST EN 61499-2:2006SLOVENSKI
STANDARD



SIST EN 61499-2:2006



EUROPEAN STANDARD
EN 61499-2 NORME EUROPÉENNE EUROPÄISCHE NORM
August 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61499-2:2005 E
ICS 25.040.40; 35.240.50
English version
Function blocks Part 2: Software tools requirements (IEC 61499-2:2005)
Blocs fonctionnels Partie 2: Spécifications des outils logiciels(CEI 61499-2:2005)
Funktionsbausteine für industrielle Leitsysteme Teil 2: Anforderungen an Software-Werkzeuge (IEC 61499-2:2005)
This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 61499-2:2006



EN 61499-2:2005 - 2 - Foreword The text of the International Standard IEC 61499-2:2005, prepared by IEC TC 65, Industrial-process measurement and control, was submitted to the formal vote and was approved by CENELEC as EN 61499-2 on 2005-06-01 without any modification. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2006-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2008-06-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61499-2:2005 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 61499-2:2006



- 3 - EN 61499-2:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61499-1 - 1) Function blocks Part 1: Architecture
EN 61499-1 2005 2) IEC 61499-4 - 3) Part 4: Rules for compliance profiles
EN 61499-4 - 3)
The normative references given in EN 61499-1 apply to this part of EN 61499.
1) Undated reference. 2) Valid edition at date of issue. 3) To be published. SIST EN 61499-2:2006



SIST EN 61499-2:2006



INTERNATIONAL STANDARD IEC61499-2 First edition2005-01 Function blocks – Part 2: Software tools requirements
 IEC 2005

Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch X For price, see current catalogue PRICE CODE
Commission Electrotechnique Int
...

SLOVENSKI OSIST prEN 61499-2:2004

PREDSTANDARD
april 2004
Function Block – Part 2: Software tools requirements
ICS 35.080; 35.240.50 Referenčna številka
OSIST prEN 61499-2:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
65/339/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)
Project number 61499-2/Ed.1
Numéro de projet
IEC/TC or SC: Date of circulation Closing date for voting (Voting mandatory
TC 65
Date de diffusion for P-members)
Date de clôture du vote (Vote obligatoire
CEI/CE ou SC:
2004-01-16
pour les membres (P))
2004-06-18
Titre du CE/SC: Mesure et commande dans les TC/SC Title Industrial-process measurement
processus industriels and control
Secretary: Bernard DUMORTIER
Secrétaire:
Also of interest to the following committees Supersedes document
Intéresse également les comités suivants Remplace le document
SC65B, SC65C, ISOTC184/SC5 65/307/CD
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE MODIFICATION. THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À PRÉSENTER, RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES DROITS DE PROPRIÉTÉ COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
DONT ILS AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À FOURNIR UNE THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
DOCUMENTATION EXPLICATIVE.
Titre : CEI 61499-2 : Bloc fonctionnel – Partie Title IEC 61499-2 : Function Block – Part 2:
2 : Spécifications des outils logiciels. Software tool requirements
Note d'introduction Introductory note
In conformance with work programme revised in
Selon le plan de travail établi à Madrid
Madrid
ATTENTION ATTENTION
Parallel IEC CDV/CENELEC Enquiry) CDV soumis en parallèle au vote (CEI) et à
l’enquête (CENELEC)
Copyright © 2004 International Electrotechnical Commission, IEC. All rights reserved. It is
permitted to download this electronic file, to make a copy and to print out the content for the sole
purpose of preparing National Committee positions. You may not copy or "mirror" the file or
printed version of the document, or any part of it, for any other purpose without permission in
writing from IEC.

---------------------- Page: 2 ----------------------
61499-2/Ed. 1 CDV  IEC 2004 2
FUNCTION BLOCKS –
Part 2: Software tool requirements
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61499-2 has been prepared by Working Group 6, of IEC technical
committee 65: Industrial-Process Measurement an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.