Laser modules used for telecommunication - Reliability assessment

The aim of this standard is: - to establish a standard method of assessing the reliability of laser modules in order to minimize risks and to promote product development and reliability; - to establish means by which the distribution of failures with time can be determined. This should enable the determination of equipment failure rates for specified end of life criteria.

Lasermodule für Telekommunikationsanwendungen - Zuverläsigkeitsbewertung

Modules laser utilisés pour les télécommunications - Evaluation de la fiabilité

Cette Norme a pour but: - d'établir une méthode normalisée permettant d'évaluer la fiabilité des modules laser afin de minimiser les risques et de favoriser le développement et la fiabilité du produit; - d'établir les moyens permettant de déterminer la répartition des défaillances au fil du temps. Il convient que les taux de défaillance du matériel pour des critères de fin de vie spécifiés puissent ainsi être déterminés.

Laser modules used for telecommunication - Reliability assessment (IEC 61751:1998)

General Information

Status
Withdrawn
Publication Date
09-Apr-1998
Withdrawal Date
31-Dec-2000
Technical Committee
Drafting Committee
Parallel Committee
Current Stage

Buy Standard

Standard
EN 61751:1999
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61751:1999
01-maj-1999
Laser modules used for telecommunication - Reliability assessment (IEC
61751:1998)
Laser modules used for telecommunication - Reliability assessment
Lasermodule für Telekommunikationsanwendungen - Zuverläsigkeitsbewertung
Modules laser utilisés pour les télécommunications - Evaluation de la fiabilité
Ta slovenski standard je istoveten z: EN 61751:1998
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 61751:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61751:1999

---------------------- Page: 2 ----------------------

SIST EN 61751:1999

---------------------- Page: 3 ----------------------

SIST EN 61751:1999

---------------------- Page: 4 ----------------------

SIST EN 61751:1999

---------------------- Page: 5 ----------------------

SIST EN 61751:1999

---------------------- Page: 6 ----------------------

SIST EN 61751:1999
NORME
CEI
INTERNATIONALE
IEC
61751
INTERNATIONAL
Première édition
STANDARD
First edition
1998-02
Modules laser utilisés pour
les télécommunications –
Evaluation de la fiabilité
Laser modules used
for telecommunication –
Reliability assessment
 IEC 1998 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE V
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61751:1999
61751 © IEC:1998 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION . 7
Clause
1 Scope. 9
2 Normative references. 9
3 Terms and definitions. 11
4 Laser reliability and quality assurance procedure . 11
4.1 Demonstration of product quality . 11
4.2 Testing responsibilities. 13
4.3 Quality Improvement Programmes (QIPs). 13
5 Tests. 15
5.1 Structural similarity. 15
5.2 Burn-in and screening (when applicable in the DS) . 15
6 Activities. 23
6.1 Analysis of reliability results . 23
6.2 Technical visits to LMMs . 25
6.3 Design/process changes. 25
6.4 Deliveries. 25
6.5 Supplier documentation. 25
Annex A (normative) Laser diode and laser module failure mechanisms. 27
Annex B (informative) Guide. 41
Figures
A.1 Non-linearities in laser-current characteristics. 33
A.2 “Bathtub” failure rate curve . 35
A.3 Example of cumulative failure plot showing log-normal distribution
of laser failure rate .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.