EN 62137-1-2:2007

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test

The test method described in IEC 62137-1-2:2007 is applicable to leadless surface mounting components and surface mounting connectors to which pull test is not applicable. It is not applicable to multi-lead components and gull-wing leads. The method is designed to test and evaluate the endurance of the solder joint between component terminals and lands on a substrate, by means of a shear type mechanical stress. This test is applicable to evaluate the effects of repeated temperature change on the strength of the solder joints between terminals and lands on a substrate.

Oberflächenmontage-Technik - Verfahren zur Prüfung auf Umgebungseinflüsse und zur Prüfung der Haltbarkeit von Oberflächen-Lötverbindungen - Teil 1-2: Scherfestigkeitsprüfung

Technologie de montage en surface - Méthodes d'essais d'environnement et d'endurance des joints brasés montés en surface - Partie 1-2: Essai de résistance au cisaillement

La méthode d'essai décrite dans la CEI 62137-1-2:2007 est applicable aux composants montés en surface sans connexion et aux connecteurs montés en surface auxquels l'essai à la traction n'est pas applicable. Elle n'est pas applicable aux composants à sorties multiples ni aux composants à sortie en aile de mouette. La méthode est conçue pour soumettre à essai et évaluer l'endurance du joint brasé entre les bornes des composants et les plages d'accueil sur un substrat, au moyen d'une contrainte mécanique de type cisaillement. Cet essai permet d'évaluer les effets de variations répétées de la température sur la résistance des joints brasés entre les bornes et les plages d'accueil sur un substrat.

Tehnologija površinske montaže - Okoljske in vzdržljivostne preskusne metode za spoje površinske montaže - 1-2. del: Preskus strižne trdnosti (IEC 62137-1-2:2007)

General Information

• Status: Published
• Publication Date: 30-Aug-2007
• Withdrawal Date: 31-Jul-2010
• ICS: 31.190 - Electronic component assemblies
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-Aug-2007
• Completion Date: 31-Aug-2007
• Ref Project: SIST EN 62137-1-2:2008 - Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-2: Shear strength test

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62137-1-2:2008
01-januar-2008
Tehnologija površinske montaže - Okoljske in vzdržljivostne preskusne metode za
spoje površinske montaže - 1-2. del: Preskus strižne trdnosti (IEC 62137-1-2:2007)
Surface mounting technology - Environmental and endurance test methods for surface
mount solder joint -- Part 1-2: Shear strength test
Oberflächenmontage-Technik - Verfahren zur Prüfung auf Umgebungseinflüsse und zur
Prüfung der Haltbarkeit von Oberflächen-Lötverbindungen - Teil 1-2:
Scherfestigkeitsprüfung
Technique du montage en surface - Méthodes d'essai d'environnement et d'endurance
des joints de soudure pour montage en surface - Partie 1-2: Essai de résistance au
cisaillement
Ta slovenski standard je istoveten z: EN 62137-1-2:2007
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
SIST EN 62137-1-2:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62137-1-2

NORME EUROPÉENNE
August 2007
EUROPÄISCHE NORM

ICS 31.190


English version


Surface mounting technology -
Environmental and endurance test methods
for surface mount solder joint -
Part 1-2: Shear strength test
(IEC 62137-1-2:2007)


Technique du montage en surface -  Oberflächenmontage-Technik -
Méthodes d'essai d'environnement Verfahren zur Prüfung
et d'endurance des joints de soudure auf Umgebungseinflüsse
pour montage en surface - und zur Prüfung der Haltbarkeit
Partie 1-2: Essai de résistance von Oberflächen-Lötverbindungen -
au cisaillement Teil 1-2: Scherfestigkeitsprüfung
(CEI 62137-1-2:2007) (IEC 62137-1-2:2007)




This European Standard was approved by CENELEC on 2007-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62137-1-2:2007 E

---------------------- Page: 2 ----------------------

EN 62137-1-2:2007 - 2 -
Foreword
The text of document 91/683/FDIS, future edition 1 of IEC 62137-1-2, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 62137-1-2 on 2007-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62137-1-2:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-2-21 NOTE  Harmonized as EN 60068-2-21:2006 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62137-1-2:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60068-1 - E
...