EN 62301:2005

Household electrical appliances - Measurement of standby power

Specifies methods of measurement of electrical power consumption in standby mode. It is applicable to mains powered electrical household appliances and to the mains powered parts of appliances that use other fuels such as gas or oil. This standard does not specify safety requirements. It does not specify minimum performance requirements nor does it set maximum limits on power or energy consumption.

Elektrische Geräte für den Hausgebrauch - Messung der Stand-by-Leistungsaufnahme

Appareils électrodomestiques - Mesure de la consommation en veille

Spécifie les méthodes de mesure de la consommation électrique en mode veille. Elle s'applique aux appareils électrodomestiques connectés au réseau et aux parties d'appareils connectées au réseau qui utilisent d'autres combustibles tels que le gaz ou le pétrole. La présente norme ne spécifie pas des exigences de sécurité. Elle ne précise pas les exigences d'aptitude à la fonction minimales et ne définit pas non plus les limites maximales de la consommation de puissance ou d'énergie.

Gospodinjski električni aparati - Merjenje moči v stanju pripravljenosti (IEC 62301:2005, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 01-Dec-2005
• Withdrawal Date: 30-Jun-2008
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 97.030 - Domestic electrical appliances in general
• Technical Committee: CLC/TC 59X - Consumer information related to household electrical appliances
• Drafting Committee: IEC/TC 59 - IEC_TC_59
• Parallel Committee: IEC/TC 59 - IEC_TC_59
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Mar-2014
• Ref Project: SIST EN 62301:2006 - Household electrical appliances - Measurement of standby power

Relations

• Replaced By: EN 50564:2011 - Electrical and electronic household and office equipment - Measurement of low power consumption
• Effective Date: 29-Jan-2023

Standards Content (Sample)

6,67(16/29(16.,QRYHPEHU67$1'$5'*RVSRGLQMVNLHOHNWULþQLDSDUDWL0HUMHQMHPRþLYVWDQMXSULSUDYOMHQRVWL,(&VSUHPHQMHQ+RXVHKROGHOHFWULFDODSSOLDQFHV0HDVXUHPHQWRIVWDQGE\SRZHU,(&PRGLILHG !"#$%&'( )&!*- . 5HIHUHQþQDãWHYLOND6,67(1HQ,&6

EUROPEAN STANDARD
EN 62301 NORME EUROPÉENNE EUROPÄISCHE NORM
December 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62301:2005 E
ICS 17.220.20; 97.030
English version
Household electrical appliances – Measurement of standby power (IEC 62301:2005, modified)
Appareils électrodomestiques – Mesure de la consommation en veille (CEI 62301:2005, modifiée)
Elektrische Geräte für den Hausgebrauch –Messung der Stand-by-Leistungsaufnahme(IEC 62301:2005, modifiziert)
This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

at national level by publication of an identical
national standard or by endorsement
(dop)
2006-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-07-01 Annex ZA has been added by CENELEC. __________

- 3 - EN 62301:2005 Endorsement notice The text of the International Standard IEC 62301:2005 was approved by CENELEC as a European Standard with agreed common modifications as given below. COMMON MODIFICATIONS Introduction Add: The document is written as a specific measurement procedure and shall not normally be used on its own but as a referenced standard in a product performance standard. Thus where a product requires data on standby power, it shall be made by incorporation of a new clause in the product performance standard which makes reference to this standard and defines within that clause set-up data and control procedures. However since it will no doubt be used as a generic measurement method for appliances that have no performance standard or are “new” appliances, further modifications to EN 62301 will likely be needed in the future. The aim of the common modifications to the text of IEC 62301:2005 is to ensure the European Standard complies with the EU requirements for energy labelling. 4.3 Power supply Replace the second paragraph by: Where the test voltage and frequency are not defined by an external standard, the test voltage and test frequency shall be: • 230 V ± 1 % • 50 Hz ± 1 % If the appliances are to be connected to three phases and the test voltage and frequency are not defined by an external standard the test voltage and test frequency shall be: • 400 V ± 1 % • 50 Hz ± 1 % Delete Table 1.
Add the following new clause: Z1 Tolerances and control procedures Where tolerances and control procedures are not defined by an external standard, the tolerances and control procedures shall be according to the following. Z1.1 For power consumption greater than 1 W The standby power determined according to this standard on the first appliance shall not be greater than the value declared by the manufacturer plus 15 %. If the result of the test carried out on the first appliances is greater than the value declared plus 15 %, the test for standby power shall be carried out on a further three appliances, which shall be randomly selected from the market. The arithmetic mean of the values of these three appliances for the standby power shall not be greater than the declared value plus 10 %.

Harmonized as EN 60299 (not modified). IEC 60311 NOTE
Harmonized as EN 60311 (not modified). IEC 60350 NOTE
Harmonized as EN 60350 (not modified). IEC 60379 NOTE
Harmonized as EN 60379:2004 (modified). IEC 60442 NOTE
Harmonized as EN 60442 (not modified). IEC 60456 NOTE
Harmonized as EN 60456:2005 (modified). IEC 60531 NOTE
Harmonized as EN 60531:2000 (modified). IEC 60619 NOTE
Harmonized as EN 60619 (not modified). IEC 60661 NOTE
Harmonized as EN 60661 (not modified). IEC 60675 NOTE
Harmonized as EN 60675 (not modified). IEC 60705 NOTE
Harmonized as EN 60705 (not modified). IEC 60879 NOTE
Harmonized as EN 60879 (not modified). IEC 61121 NOTE
Harmonized as EN 61121:2005 (modified). IEC 61176 NOTE
Harmonized as EN 61176 (not modified). IEC 61254 NOTE
Harmonized as EN 61254 (not modified). IEC 61591 NOTE
Harmonized as EN 61591 (not modified). IEC 62087 NOTE
Harmonized as EN 62087 (not modified). __________

- 5 - EN 62301:2005 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-131 2002 International Electrotechnical Vocabulary Part 131: Circuit theory
- - IEC 60050-300 2001 Part 311: General terms relating to measurements
Part 312: General terms relating to electrical measurements
Part 313: Types of electrical measuring instruments
Part 314: Specific terms according to the type of instrument
- -
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 62301Première éditionFirst edition2005-06 Appareils électrodomestiques – Mesure de la consommation en veille
Household electrical appliances – Measurement of standby power
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch CODE PRIX PRICE CODE S Commission Electrotechnique InternationaleInternational Electrotechnical Commission

62301  IEC:2005 – 3 –
CONTENTS
FOREWORD.5 INTRODUCTION.9
1 Scope.11 2 Normative references.11 3 Terms and definitions.13 4 General conditions for measurements.13 4.1 General.13 4.2 Test room.13 4.3 Power supply.13 4.4 Supply voltage waveform.15 4.5 Power measurement accuracy.15 5 Measurements.15 5.1 General.15 5.2 Selection and preparation of appliance or equipment.17 5.3 Procedure.17 6 Test report.19 6.1 Appliance (equipment) details.19 6.2 Test parameters.19 6.3 Measured data, for each mode as applicable.21 6.4 Test and laboratory details.21
Annex A (informative)
Some typical modes for selected appliance types.23 Annex B (informative)
Notes on the measurement of low power modes.31 Annex C (informative)
Converting power values to energy.37 Annex D (informative)
Determination of uncertainty of measurement.41
Bibliography.43
Figure A.1 – Circuit diagram images by type.29
Table 1 – Typical nominal electricity supply details for some regions.15

62301  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
HOUSEHOLD ELECTRICAL APPLIANCES – MEASUREMENT OF STANDBY POWER
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of t
...