Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods

Covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply to power output under specified operating and transient conditions; electrical and thermal efficiency under specified operating conditions; environmental characteristics under specified operating and transient conditions.

Brennstoffzellentechnologien - Teil 3-2: Stationäre Brennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren

Technologies des piles à combustible - Partie 3-2: Systèmes à piles à combustible stationnaires - Méthodes d'essai des performances

Couvre les aspects de fonctionnement et d'environnement des performances des systèmes à piles à combustible stationnaires. Les méthodes d'essai s'appliquent à la puissance de sortie dans des conditions de fonctionnement spécifiées y compris les conditions transitoires; au rendement électrique et thermique dans des conditions de fonctionnement spécifiées; aux caractéristiques d'environnement dans des conditions de fonctionnement spécifiées y compris les conditions transitoires.

Tehnologije gorivnih celic – 3-2. del: Nepremični elektroenergetski sistemi z gorivnimi celicami – Preskusne metode zmogljivosti

General Information

Status
Withdrawn
Publication Date
15-Jun-2006
Withdrawal Date
30-Apr-2009
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Nov-2014
Completion Date
23-Nov-2014

Relations

Buy Standard

Standard
EN 62282-3-2:2006
English language
81 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 62282-3-2:2006

STANDARD
september 2006
Tehnologije gorivnih celic – 3-2. del: Nepremični elektroenergetski sistemi z
gorivnimi celicami – Preskusne metode zmogljivosti
Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance
test methods
ICS 27.070 Referenčna številka
SIST EN 62282-3-2:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62282-3-2

NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM

ICS 27.070


English version

Fuel cell technologies
Part 3-2: Stationary fuel cell power systems -
Performance test methods
(IEC 62282-3-2:2006)


Technologies des piles à combustible - Brennstoffzellentechnologien
Partie 3-2: Systèmes à piles Teil 3-2: Stationäre
à combustible stationnaires - Brennstoffzellen-Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(CEI 62282-3-2:2006) (IEC 62282-3-2:2006)




This European Standard was approved by CENELEC on 2006-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-3-2:2006 E

---------------------- Page: 2 ----------------------

EN 62282-3-2:2006 - 2 -
Foreword
The text of document 105/103/FDIS, future edition 1 of IEC 62282-3-2, prepared by IEC TC 105, Fuel cell
technologies, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62282-3-2 on 2006-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62282-3-2:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC ISO 8041 NOTE Harmonized as EN ISO 8041:2005 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62282-3-2:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year
IEC 60051 Series Direct acting indicating analogue electrical EN 60051 Series
measuring instruments and their accessories


IEC 60359 2001 Electrical and electronic measurement EN 60359 2002
equipment - Expression of performance


IEC 60688 1992 Electrical measuring transducers for EN 60688 1992
converting a.c. electrical quantities to
analogue or digital signals


1) 2)
IEC 61000-4-7 Electromagnetic compatibility (EMC) EN 61000-4-7
- 2002
Part 4-7: Testing and measurement
techniques - General guide on harmonics and
interharmonics measurements and
instrumentation, for power supply systems
and equipment connected thereto


1) 2)
IEC 61000-4-13 Electromagnetic compatibility (EMC) EN 61000-4-13
- 2002
Part 4-13: Testin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.