EN 50318:2002
(Main)Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
This European Standard specifies functional requirements for the validation of simulation methods to ensure mutual acceptance of – input and output parameters; – a standardized subset of test results for evaluation of simulation methods; – comparison with measurements; – comparison between simulation methods. This standard applies to the current collection from an overhead contact line by pantographs mounted on railway vehicles. It does not apply to trolley bus systems.
Bahnanwendungen - Stromabnahmesysteme - Validierung von Simulationssystemen für das dynamische Zusammenwirken zwischen Stromabnehmer und Oberleitung
Applications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaire
Železniške naprave – Sistemi tokovnega odjema – Veljavnost simuliranja medsebojnih dinamičnih vplivov med tokovnim odjemnikom in kontaktnim vodnikom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDQMDQLPYRGQLNRPBahnanwendungen - Stromabnahmesysteme - Validierung von Simulationssystemen für das dynamische Zusammenwirken zwischen Stromabnehmer und OberleitungApplications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaireRailway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line29.280Electric traction equipmentICS:Ta slovenski standard je istoveten z:EN 50318:2002SIST EN 50318:2003en01-maj-2003SIST EN 50318:2003SLOVENSKI
STANDARD
SIST EN 50318:2003
EUROPEAN STANDARDEN 50318NORME EUROPÉENNEEUROPÄISCHE NORMJuly 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 50318:2002 EICS 29.280English versionRailway applications -Current collection systems -Validation of simulation of the dynamic interactionbetween pantograph and overhead contact lineApplications ferroviaires -Systèmes de captage de courant -Validation des simulations de l'interactiondynamique entre le pantographeet la caténaireBahnanwendungen -Stromabnahmesysteme -Validierung von Simulationssystemenfür das dynamische Zusammenwirkenzwischen Stromabnehmer undOberleitungThis European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.SIST EN 50318:2003
EN 50318:2002– 2 – ForewordThis European Standard was prepared by SC 9XC, Electric supply and earthing systems for public transportequipment and ancillary apparatus (fixed installations), of Technical Committee CENELEC TC 9X, Electricaland electronic applications for railways.The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50318 on2002-04-01.The following dates were fixed:-latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-04-01-latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-04-01Annexes designated "normative" are part of the body of the standard.In this standard, annex A is normativeThis European Standard has been prepared under a mandate given to CENELEC by the EuropeanCommission and supports the Interoperability Directive, 96/48/EC.__________SIST EN 50318:2003
– 3 –EN 50318:2002ContentsPage1Scope.42Normative references.43Definitions.44Symbols.65General.66Modelling of the pantograph.86.1General requirements.86.2Minimum data.87Modelling of the overhead contact line.87.1General requirements.87.2Minimum data.98Parameters of simulation.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.