iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 63244-1:2021

(Main)

Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1: General requirements and specifications

Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1: General requirements and specifications

IEC 63244-1:2021 provides general requirements and specifications of the semiconductor devices for the performance and reliability evaluations of wireless power transfer and charging systems. For the performance evaluations, this part covers various characterization parameters and symbols, general system diagrams, and test setups and test conditions. This document also describes classifications of the wireless power transfer technologies.

Halbleiterbauelemente – Halbleiterbauelemente für die drahtlose Leistungsübertragung und Ladung – Teil 1: Allgemeine Anforderungen und Festlegungen

Dispositifs à semiconducteurs – Dispositifs à semiconducteurs pour le transfert de puissance et la charge sans fil – Partie 1: Exigences et spécifications générales

L’IEC 63244-1:2021 fournit des exigences et des spécifications générales des dispositifs à semiconducteurs pour les évaluations de fonctionnement et de fiabilité des systèmes de transfert de puissance et de charge sans fil. Dans le cas des évaluations de fonctionnement, la présente partie couvre différents paramètres et symboles de caractérisation, différents schémas de réseaux généraux, ainsi que différents montages et conditions d’essai. Le présent document décrit également des classifications des techniques de transfert de puissance sans fil.

Polprevodniški elementi - Polprevodniški elementi za brezžični prenos moči in napajanje - 1. del: Splošne zahteve in specifikacije (IEC 63244-1:2021)

General Information

Status
Published
Publication Date
21-Oct-2021
ICS
31.080.99 - Other semiconductor devices
Technical Committee
CLC/SR 47 - Semiconductor devices
Drafting Committee
IEC/TC 47 - IEC_TC_47
Current Stage
6060 - Document made available - Publishing
Start Date
22-Oct-2021
Completion Date
22-Oct-2021
Ref Project
SIST EN IEC 63244-1:2021 - Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1 : General requirements and specifications (IEC 63244-1:2021)

Buy Standard

EN IEC 63244-1:2021 - BARVEEN IEC 63244-1:2021 - BARVE
PreviousNext
Standard
EN IEC 63244-1:2021 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63244-1:2021
01-december-2021
Polprevodniški elementi - Polprevodniški elementi za brezžični prenos moči in
napajanje - 1. del: Splošne zahteve in specifikacije (IEC 63244-1:2021)
Semiconductor devices - Semiconductor devices for wireless power transfer and
charging - Part 1 : General requirements and specifications (IEC 63244-1:2021)
Halbleiterbauelemente – Halbleiterbauelemente für die drahtlose Leistungsübertragung
und Ladung – Teil 1: Allgemeine Anforderungen und Festlegungen (IEC 63244-1:2021)
Dispositifs à semiconducteurs – Dispositifs à semiconducteurs pour le transfert de
puissance et la charge sans fil – Partie 1: Exigences et spécifications générales (IEC
63244-1:2021)
Ta slovenski standard je istoveten z: EN IEC 63244-1:2021
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 63244-1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63244-1:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 63244-1:2021


EUROPEAN STANDARD EN IEC 63244-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2021
ICS 31.080.99

English Version
Semiconductor devices - Semiconductor devices for wireless
power transfer and charging - Part 1: General requirements and
specifications
(IEC 63244-1:2021)
Dispositifs à semiconducteurs - Dispositifs à Halbleiterbauelemente - Halbleiterbauelemente für die
semiconducteurs pour le transfert de puissance et la charge drahtlose Leistungsübertragung und Ladung - Teil 1:
sans fil - Partie 1: Exigences et spécifications générales Allgemeine Anforderungen und Festlegungen
(IEC 63244-1:2021) (IEC 63244-1:2021)
This European Standard was approved by CENELEC on 2021-10-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63244-1:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63244-1:2021
EN IEC 63244-1:2021 (E)
European foreword
The text of document 47/2706/FDIS, future edition 1 of IEC 63244-1, prepared by IEC/TC 47
“Semiconductor devices” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 63244-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–07–19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–10–19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63244-1:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60747-16-1 NOTE Harmonized as EN 60747-16-1
IEC 63028 NOTE Harmonized as EN 63028
2

---------------------- Page: 4 ----------------------
SIST EN IEC 63244-1:2021
EN IEC 63244-1:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The fol
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 63364-1:2023(Main)
Semiconductor devices - Semiconductor devices for IoT system - Part 1: Test method of sound variation detection
SIST EN IEC 63364-1:2023

This part of IEC 63364-1 provides terms, test method, and report of sound variation detection system based on IoT. It provides the evaluation method for each part of the sound variation detection system based on IoT in the block diagram, the characterization parameters, symbols, test setups and the conditions. In addition, this document defines the configuration items and criteria of standard space and firing situation for the quality evaluation measurement of sound field variation detection system with IoT.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63373:2022(Main)
Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
SIST EN IEC 63373:2022

In general, dynamic ON-resistance testing is a measure of charge trapping phenomena in GaN power transistors. This publication describes the guidelines for testing dynamic ON-resistance of GaN lateral power transistor solutions. The test methods can be applied to the following: a) GaN enhancement and depletion-mode discrete power devices [1] b) GaN integrated power solutions c) the above in wafer and package levels Wafer level tests are recommended to minimize parasitic effects when performing high precision measurements. For package level tests, the impact of package thermal characteristics should be considered so as to minimize any device under test (DUT) self-heating implications. The prescribed test methods may be used for device characterization, production testing, reliability evaluations and application assessments of GaN power conversion devices. This document is not intended to cover the underlying mechanisms of dynamic ON-resistance and its symbolic representation for product specifications.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62969-4:2018(Main)
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 4: Evaluation method of data interface for automotive vehicle sensors
SIST EN IEC 62969-4:2018

IEC 62969-4:2018 specifies a method of directly fault injection test for automotive semiconductor sensor interface that can be used to support the conformance assurance in the vehicle communications interface.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62969-3:2018(Main)
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 3: Shock driven piezoelectric energy harvesting for automotive vehicle sensors
SIST EN IEC 62969-3:2018

IEC 62969-3:2018 describes terms, definitions, symbols, configurations, and test methods that can be used to evaluate and determine the performance characteristics of mechanical shock driven piezoelectric energy harvesting devices for automotive vehicle sensor applications. This document is also applicable to energy harvesting devices for motorbikes, automobiles, buses, trucks and their respective engineering subsystems applications without any limitations of device technology and size.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62969-2:2018(Main)
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors
SIST EN IEC 62969-2:2018

IEC 62969-2:2018 specifies procedures and definitions for measuring the efficiency of the wireless power transmission system for the automotive vehicles sensors. This document deals with the power range below 500 mW.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62969-1:2018(Main)
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
SIST EN IEC 62969-1:2018

IEC 62969-1:2017(E) provides general requirements for performance evaluations and environmental conditions for the power interface of automotive vehicle sensors. For performance evaluations, various electrical performances such as voltage drop from power source to automotive sensors, AC noises and voltage level are included. For environmental conditions, various test conditions such as temperature, humidity and vibration are included. In addition, terms, definitions, symbols and configurations are covered in this part.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 62258-4:2013(Main)
Semiconductor die products - Part 4: Questionnaire for die users and suppliers
SIST-TP CLC/TR 62258-4:2013

IEC/TR 62258-4:2012 has been developed to facilitate the production, supply and use of semiconductor die products, including: - wafers; - singulated bare die; - die and wafers with attached connection structures; - minimally or partially encapsulated die and wafers. This technical report contains a questionnaire, based on the requirements of other parts of IEC 62258, which may be used in negotiations and contracts between suppliers and purchasers of die devices. It is intended to assist all those involved in the supply chain for die devices to comply with the requirements of the IEC 62258-1:2009 and IEC 62258-2:2011 standards. It should be recognized that the tables contained in this technical report form a checklist of information that can potentially be supplied and that it may not be relevant or possible to complete all fields. Different markets may require different subsets of the information requested herein. This edition includes the following significant technical changes with respect to the previous edition: The document checklist was changed to mirror IEC 62258-1:2009 requirements exactly.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62258-2:2011(Main)
Semiconductor die products - Part 2: Exchange data formats
SIST EN 62258-2:2011

This part of EN 62258 has been developed to facilitate the production, supply and use of semiconductor die products, including but not limited to - singulated bare die, - minimally or partially encapsulated die and wafers. This standard specifies the data formats that may be used for the exchange of data covered by other parts in the EN 62258 series as well as definitions of all parameters used according to the principles and methods of EN 61360-1, EN 61360-2 and EN 61360-4. It introduces a Device Data Exchange (DDX) format, with the prime goal of facilitating the transfer of adequate geometric data between the die manufacturer and the CAD/CAE user and formal information models that allow data exchange in other formats such as STEP physical file format, fin accordance with ISO 10303-21 and XML. The data format has been kept intentionally flexible to permit usage beyond this initial scope. This standard reflects the DDX data format: version 1.2.1.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62047-4:2010(Main)
Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
SIST EN 62047-4:2010

IEC 62047-4:2008 describes the generic specifications for micro-electromechanical systems (MEMS) made by semiconductors, which are the basis for specifications given in other parts of this series for various types of MEMS applications such as sensors, RF MEMS, excluding optical MEMS, bio MEMS, micro TAS, and power MEMS. This standard specifies general procedures for quality assessment to be used in IECQ-CECC systems and establishes general principles for describing and testing of electrical, optical, mechanical and environmental characteristics. IEC 62047-4:2008 aids in the preparation of standards that define devices and systems made by micromachining technology, including but not limited to, material characterization and handling, assembly and testing, process control and measuring methods. MEMS described in this standard are basically made of semiconductor material. However, the statements made in this standard are also applicable to MEMS using materials other than semiconductor, for example, polymers, glass, metals and ceramic materials.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62258-1:2010(Main)
Semiconductor die products - Part 1: Procurement and use
SIST EN 62258-1:2011

IEC 62258-1:2009 has been developed to facilitate the production, supply and use of semiconductor die products, including: - wafers, - singulated bare die, - die and wafers with attached connection structures, - minimally or partially encapsulated die and wafers. This standard defines the minimum requirements for the data that are needed to describe such die products and is intended as an aid to the design of and procurement for assemblies incorporating die products. It covers the requirements for data, including: - product identity, - product data, - die mechanical information, - test, quality, assembly and reliability information, - handling, shipping and storage information. The main changes that have been introduced in this edition have been to ensure consistency across all parts of the standard. The ordering of the subclauses, particularly in Clause 6, has been changed to be more logical and the text of some of the requirements has been amended to add requirements on further information as covered by IEC/TR 62258-4, IEC/TR 62258-7 and IEC/TR 62258-8. New requirements include information on permutability of terminals and functional elements (6.6.4) and moisture sensitivity for partially encapsulated devices (8.8).

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day