EN 60095-1:1993/A13:1997
(Amendment)Lead-acid starter batteries - Part 1: General requirements and methods of test
- BACK
- 11-Dec-1997
- 31-Aug-1998
- 01.080.20
- 29.220.20
- CLC/TC 21X
Lead-acid starter batteries - Part 1: General requirements and methods of test
Superseded by EN 50342:2001
Blei-Starterbatterien - Teil 1: Allgemeine Anforderungen und Prüfungen
Batteries d'accumulateurs de démarrage au plomb - Partie 1: Prescriptions générales et méthodes d'essai
Amendment to subclauses 5.6.3.5 and 5.6.4 of EN
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2001
Amendment to subclauses 5.6.3.5 and 5.6.4 of EN
Lead-acid starter batteries -- Part 1: General requirements and methods of test
Blei-Starterbatterien -- Teil 1: Allgemeine Anforderungen und Prüfungen
Batteries d'accumulateurs de démarrage au plomb -- Partie 1: Prescriptions générales et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 60095-1:1993/A13:1997
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
2003-01.Slovenski inštitut z
...
This May Also Interest You
2021: CLC legacy converted by DCLab NISOSTS
- Amendment6 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Oct-1998
- 28-Feb-1999
- 01.080.20
- 29.220.20
- 29.220.30
- CLC/TC 21X
This International Standard defines the conditions of utilization of the recycling symbol of the International Organization for Standardization (ISO) associated with the chemical symbols indicating the electrochemical system of the battery. This standard applies to lead-acid batteries (Pb) and nicke-cadmium batteries (Ni-Cd).
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Nov-1996
- 31-May-1997
- 01.080.20
- 29.220.20
- 29.220.30
- CLC/TC 21X
2021: CLC legacy converted by DCLab NISOSTS
- Amendment6 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Oct-1998
- 28-Feb-1999
- 01.080.20
- 29.220.20
- 29.220.30
- CLC/TC 21X
This International Standard defines the conditions of utilization of the recycling symbol of the International Organization for Standardization (ISO) associated with the chemical symbols indicating the electrochemical system of the battery. This standard applies to lead-acid batteries (Pb) and nicke-cadmium batteries (Ni-Cd).
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Nov-1996
- 31-May-1997
- 01.080.20
- 29.220.20
- 29.220.30
- CLC/TC 21X
IEC 60730-2-6:2025 applies to automatic electrical pressure sensing controls • for use in, on, or in association with equipment for household appliance and similar use; NOTE 1 Throughout this document, the word "equipment" means "appliance and equipment" and "controls" means "pressure sensing controls". • for building automation within the scope of ISO 16484 series and IEC 63044 series (HBES/BACS); EXAMPLE 1 Independently mounted automatic electrical pressure sensing controls, controls in smart grid systems and controls for building automation systems within the scope of ISO 16484-2. • for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications; EXAMPLE 2 Automatic electrical pressure sensing controls for commercial catering, heating and air-conditioning equipment. • that are smart enabled automatic electrical pressure sensing controls; EXAMPLE 3 Smart grid automatic electrical pressure sensing controls, remote interfaces/control of energy-consuming equipment including computer or smart phone. • that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; • used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof; • utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs; • using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J; • that are mechanically or electrically operated, responsive to or controlling a pressure or vacuum; • as well as manual controls when such are electrically and/or mechanically integral with automatic controls. NOTE 2 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1. This document is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. This document is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This document applies to - the inherent safety of pressure sensing controls, and - functional safety of pressure sensing controls and safety related systems, - pressure sensing controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, - the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment. This document does not • apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate automatic electrical controls intended specifically for industrial applications in cases where no relevant safety standard exists; • take into account the response value of an automatic action of a pressure sensing control, if such a response value is dependent upon
- Draft38 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft4 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Oct-2025
- 33.100.20
- 2014/30/EU
- M/490
- CLC/TC 210
IEC 62453-1:2025 is available as IEC 62453-1:2025 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62453-1:2025 presents an overview and guidance for the IEC 62453 series. It • explains the structure and content of the IEC 62453 series (see Clause 5); • provides explanations of some aspects of the IEC 62453 series that are common to many of the parts of the series; • describes the relationship to some other standards; • provides definitions of terms used in other parts of the IEC 62453 series. This third edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) introduction of a new implementation technology (defined in IEC TS 62453-43); b) introduction of an OPC UA information model for FDT (defined in IEC 62453-71).
- Draft51 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Oct-2025
- 25.040.40
- 35.100.05
- 35.110
- CLC/TC 65X
IEC 63522-21:2025 This part is used for testing along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use. This document defines a standard test method for evaluation of resistance against high temperature for long periods.
- Draft11 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 63208:2025 This document applies to the main functions of switchgear and controlgear and their assemblies, called equipment, in the context of operational technology (OT 3.1.34). It is applicable to equipment with wired or wireless data communication means and their physical accessibility, within their limits of environmental conditions. It is intended to achieve the appropriate physical and cybersecurity mitigation against vulnerabilities to security threats. This document provides requirements on the appropriate: – security risk assessment to be developed including the attack levels, the typical threats, the impact assessment and the relationship with safety; – levels of exposure of the communication interface and the determination of the equipment security level; – assessment of the exposure level of the communication interfaces; – assignment of the required security measures for the equipment; – countermeasures for the physical access and the environment derived from ISO/IEC 27001; – countermeasures referring to IEC 62443-4-2 with their criteria of applicability; – user instructions for installation, operation and maintenance; – conformance verification and testing, and – security protection profiles by family of equipment (Annex E to Annex I). In particular, it focuses on potential vulnerabilities to threats resulting in: – unintended operation, which can lead to hazardous situations; – unavailability of the protective functions (overcurrent, earth fault, etc.); – other degradation of main function. It also provides guidance on the cybersecurity management with the: – roles and responsibilities (Table 4); – typical architectures (Annex A); – use cases (Annex B); – development methods (Annex C); – recommendations to be provided to users and for integration into an assembly (Annex D); – bridging references to cybersecurity management systems (Annex K). This document does not cover security requirements for: – information technology (IT); – industrial automation and control systems (IACS), engineering workstations and their software applications; – critical infrastructure or energy management systems; – network device (communication network switch or virtual private network terminator), or – data confidentiality other than for critical security parameters; – design lifecycle management. For this aspect, see IEC 62443-4-1, ISO/IEC 27001 or other security lifecycle management standards.
- Draft129 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Oct-2025
- 29.130.20
- CLC/SR 121
IEC 60794-1-214:2025 defines the test procedure used to measure the ability of cable sheath materials to maintain their integrity when exposed to ultraviolet (UV) radiation due to sunlight or fluorescent light. This first edition cancels and replaces Method F14 of the second edition of IEC 60794‑1‑22 published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794‑1‑22:2017: a) addition of subclause as regards conditioning according to ISO 4892-2 or ISO 4892-3 for indoor-outdoor cables.
- Draft9 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Oct-2025
- 33.180.10
- CLC/TC 86A
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.