iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62343-1:2016

(Main)

Dynamic modules - Part 1: Performance standards - General conditions

Dynamic modules - Part 1: Performance standards - General conditions

IEC 62343-1:2016(E) provides a performance standard of general conditions for dynamic modules. All dynamic modules should satisfy required performance defined in individual performance standards on the general conditions defined in this document. Additional conditions may be included in individual performance standards. Keywords: dynamic modules

Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen

Modules dynamiques - Partie 1 : Normes de performance - Conditions générales

IEC 62343-1:2016 fournit une norme de performance sur les conditions générales pour des modules dynamiques. Il convient que tous les modules dynamiques satisfassent aux performances exigées définies dans des normes de performance individuelles sur les conditions générales définies dans le présent document. Des conditions complémentaires peuvent être incluses dans des normes de performance individuelles. Mots clés: modules dynamiques

Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2016)

Ta del standarda IEC 62343 zagotavlja tehnični standard splošnih pogojev za dinamične module. Vsi dinamični moduli morajo ustrezati zahtevani zmogljivosti, ki je opredeljena v posameznih tehničnih standardih v zvezi s splošnimi pogoji, določenimi v tem dokumentu. Posamezni tehnični standardi lahko vključujejo dodatne pogoje.

General Information

Status
Withdrawn
Publication Date
14-Jul-2016
Withdrawal Date
14-Jul-2019
ICS
33.180.01 - Fibre optic systems in general
33.180.99 - Other fibre optic equipment
Technical Committee
CLC/SR 86C - Fibre optic systems and active devices
Drafting Committee
IEC/SC 86C - IEC_SC_86C
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Mar-2022
Completion Date
13-Mar-2022
Ref Project
SIST EN 62343-1:2016 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2016)

Relations

Replaced By
EN IEC 62343-1:2019 - Dynamic modules - Part 1: Performance standards - General conditions
Effective Date
23-Jan-2018

Buy Standard

EN 62343-1:2016EN 62343-1:2016
PreviousNext
Standard
EN 62343-1:2016
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62343-1:2016
01-oktober-2016
'LQDPLþQLPRGXOLGHO7HKQLþQLVWDQGDUGL6SORãQLSRJRML ,(&
Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-
1:2016)
Ta slovenski standard je istoveten z: EN 62343-1:2016
ICS:
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 62343-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62343-1:2016

---------------------- Page: 2 ----------------------

SIST EN 62343-1:2016


EUROPEAN STANDARD EN 62343-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 33.180.01; 33.180.99

English Version
Dynamic modules - Part 1: Performance standards - General
conditions
(IEC 62343-1:2016)
Modules dynamiques - Partie 1 : Normes de performance - Dynamische Module - Teil 1: Betriebsverhaltensnorm -
Conditions générales Allgemeine Bedingungen
(IEC 62343-1:2016) (IEC 62343-1:2016)
This European Standard was approved by CENELEC on 2016-03-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62343-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62343-1:2016
EN 62343-1:2016
European foreword
The text of document 86C/1312/CDV, future edition 1 of IEC 62343-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62343-1:2016.
The following dates are fixed:
(dop) 2017-01-15
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-07-15
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62343-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 62343 NOTE Harmonized as EN 62343.
IEC 62343-1 (series) NOTE Harmonized as EN 62343-1 (series).
IEC 62343-2 NOTE Harmonized as EN 62343-2.

2

---------------------- Page: 4 ----------------------

SIST EN 62343-1:2016
EN 62343-1:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ITU-T G.694-1 -  Spectral grids for WDM applications: - -
DWDM frequency grid

3

---------------------- Page: 5 ----------------------

SIST EN 62343-1:2016

---------------------- Page: 6 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62343-1:2019/A1:2024(Amendment)
Dynamic modules - Part 1: Performance standards - General conditions
SIST EN IEC 62343-1:2019/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343:2023(Main)
Dynamic modules - Generic specification
SIST EN IEC 62343:2023

IEC 62343:2023 is available as IEC 62343:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343:2023 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to: - establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and - provide assistance to the purchaser in the selection of consistently high-quality DM products for their particular applications, as well as in the consultation of the appropriate specific DM standard(s). This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since "dynamic module" is a relatively new product category, the dynamic module standards series will not be bound by the existing practices where requirements differ.The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by the IEC 60825 series (see Clause 6). This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of terms and definitions for optical multicast switches (3.8); - revision of Clause 4, listing the requirements for standards in the IEC 62343 series; - addition of Clause 6 (Safety requirements).

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-1:2019(Main)
Dynamic modules - Part 1: Performance standards - General conditions
SIST EN IEC 62343-1:2019

This document provides general conditions for the standard performance of optical dynamic modules. All performance standards of dynamic modules are based on the general conditions defined in this document. Additional conditions are included in individual performance standards.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-3-4:2018(Main)
Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches
SIST EN IEC 62343-3-4:2018

IEC 62343-3-4: 2018 provides a performance specification template for multicast optical switches. The object is to provide a framework for the preparation of performance specifications or product specifications of multicast optical switches. Specification parameters required in this document are considered as essential in the product specifications or performance specifications. Keywords: multicast optical switch (MCOS)

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-5-2:2018(Main)
Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement
SIST EN IEC 62343-5-2:2018

IEC 62343-5-2:2018 describes the measurement methods of dynamic crosstalk during port switching for 1 x N fixed-grid wavelength selective switches (WSSs). The objective of this document is to establish a standard test method for different-channel dynamic crosstalk and same-channel dynamic crosstalk that occur when a particular optical channel signal is switched to the specific branching port against a common port in ITU‑T 50 GHz and 100 GHz fixed grid 1 x N (N ≥ 3) WSSs.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62343:2017(Main)
Dynamic modules - General and guidance
SIST EN 62343:2018

IEC 62343:2017(E) applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to: establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and provide assistance to the purchaser in the selection of consistently high-quality DM products for his particular applications, as well as in the consultation of the appropriate specific DM standard(s). This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since "dynamic module" is a relatively new product category, the dynamic module standards series will not be bounded by the existing practices where requirements differ. The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by IEC TC 76: Optical radiation safety and laser equipment. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: the inclusion of definitions for the wavelength selective switch.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62343-3-2:2016(Main)
Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
SIST EN 62343-3-2:2016

IEC 62343-3-2:2016(E) provides a performance specification template for optical channel monitors. The objective of this performance specification template is to provide a framework for the performance specification of the optical channel monitor. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this document should not be removed from the detail product specifications or performance specifications. This document outlines the parameters that are used to specify the performance of the optical channel monitor. Keywords: optical channel monitor (OCM)

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62343-5-1:2015(Main)
Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
SIST EN 62343-5-1:2015

IEC 62343-5-1:2014(E) contains the measurement method of gain tilt settling time for a dynamic gain tilt equalizer (DGTE) to change its gain tilt from an arbitrary initial value to a desired target value. This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: change in the title and changes in performance parameter names. Keywords: dynamic gain tilt equalizer (DGTE)

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62343-1-3:2013(Main)
Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
SIST EN 62343-1-3:2013

IEC 62343-1-3:2012 contains the guideline minimum initialization test and measurement requirements and severities, for a dynamic gain tilt equalizer (DGTE). This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - a change in the title removing the environmental category; - the addition of Clause 4, Operating and storage conditions; - the inclusion of spectral bands in Clause 5, Test; - a definition of the wavelength range for test requirements in Clause 5, Test; - the removal of the environment tests from the test details and requirements. Keywords: initialization test, measurement requirements, dynamic gain tilt equalizer (DGTE)

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-1:2019/A1:2024(Amendment)
Dynamic modules - Part 1: Performance standards - General conditions
SIST EN IEC 62343-1:2019/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day