EN 60320-2-1:2000
(Main)Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
EN following parallel vote
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil 2-1: Nähmaschinen-Steckvorrichtungen
Connecteurs pour usages domestiques et usages généraux analogues - Partie 2-1: Connecteurs pour machines à coudre
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers (IEC 60320-2-1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60320-2-1:2003
STANDARD
marec 2003
Appliance couplers for household and similar general purposes - Part 2-1: Sewing
machine couplers (IEC 60320-2-1:2000)
ICS 29.120.30 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60320-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2000
ICS 29.120.30 Supersedes EN 60320-2-1:1987
English version
Appliance couplers for household and similar general purposes
Part 2-1: Sewing machine couplers
(IEC 60320-2-1:2000)
Connecteurs pour usages domestiques Gerätesteckvorrichtungen für den
et usages généraux analogues Hausgebrauch und ähnliche allgemeine
Partie 2-1: Connecteurs pour machines Zwecke
à coudre Teil 2-1: Nähmaschinen-
(CEI 60320-2-1:2000) Steckvorrichtungen
(IEC 60320-2-1:2000)
This European Standard was approved by CENELEC on 2000-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60320-2-1:2000 E
Page 2
EN 600320-2-1:2000
Foreword
The text of document 23G/203/FDIS, future edition 2 of IEC 60320-2-1, prepared by SC 23G, Appliance
couplers, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60320-2-1 on 2000-09-01.
This European Standard supersedes EN 60320-2-1:1987.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-09-01
This part 2-1 is to be used in conjunction with EN 60320-1:1996 + A1:1996 + A2:1998, Appliance
couplers for household and similar general purposes, Part 1: General requirements.
This part 2-1 supplements or modifies the corresponding clauses of EN 60320-1.
Where a particular clause or subclause of part 1 is not mentioned in this part 2-1, that clause or
subclause applies as far as is reasonable. Where this part 2-1 states "addition", "modification" or
"replacement", the relevant text of part 1 is to be adapted accordingly.
Subclauses which are additional to those in part 1 are numbered starting from 101.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60320-2-1:2000 was approved by CENELEC as a European
Standard without any modification.
__________
Page 3
EN60320-2-1:2000
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60083 1997 Plugs and socket-outlets for domestic and - -
similar general use standardized in member
countries of IEC
IEC 60320-1 1994 Appliance couplers for household and similar EN 60320-1 1996
(mod) general purposes
Part 1: General requirements
IEC 60335-2-28 1994 Safety of household and similar electrical EN 60335-2-28 1996
(mod) appliances
Part 2-28: Particular requirements for sewing
machines
NORME CEI
INTERNATIONALE IEC
60320-2-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2000-07
Connecteurs pour usages domestiques
et usages généraux analogues –
Partie 2-1:
Connecteurs pour machines à coudre
Appliance couplers for household
and similar general purposes –
Part 2-1:
Sewing machine couplers
IEC 2000 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60320-2-1 © IEC:2000 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION .9
Clause
1 Scope . 11
2 Normative references . 11
3 Definitions. 11
4 General requirements. 13
5 General notes on tests . 13
6 Standard ratings. 13
7 Classification .13
8 Marking. 13
9 Dimensions and compatibility . 13
10 Protection against electric shock . 15
11 Provision for earthing . 15
12 Terminals and terminations . 15
13 Construction. 17
14 Moisture resistance . 17
15 Insulation resistance and electric strength . 17
16 Forces necessary to insert and to withdraw the connector. 17
17 Operation of contacts . 17
18 Resistance to heating of appliance couplers for hot conditions or very hot conditions . 17
19 Breaking capacity. 17
20 Normal operation. 19
21 Temperature rise. 19
22 Cords and their connection. 19
23 Mechanical strength . 19
24 Resistance to heat and ageing. 21
25 Screws, current-carrying parts and connections . 21
26 Creepage distances, clearances and distances through insulation . 21
27 Resistance of insulating material to heat, fire and tracking. 21
28 Resistance to rusting. 21
29 Electromagnetic compatibility (EMC) requirements . 21
Annex A Routine tests for factory wired appliance couplers related to safety
(protection against electric shock and correct polarity) . 21
60320-2-1 © IEC:2000 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
APPLIANCE COUPLERS FOR HOUSEHOLD
AND SIMILAR GENERAL PURPOSES –
Part 2-1: Sewing machine couplers
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60320-2-1 has been prepared by subcommittee 23G: Appliance
couplers, of IEC technical committee 23: Electrical accessories.
This second edition cancels and replaces the first edition published in 1984.
The text of this standard is based on the following documents:
FDIS Report on voting
23G/203/FDIS 23G/207/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
This part 2 is to be used in conjunction with IEC 60320-1: Appliance couplers for household
and similar general purposes – Part 1: General requirements. It was established on the basis
of the first edition of that standard (1994) and its amendments 1 (1995) and 2 (1996).
60320-2-1 © IEC:2000 – 7 –
The clauses of this standard supplement or modify the corresponding clauses of IEC 60320-1.
When a particular subclause of part 1 is not mentioned in this part 2, the subclause of
IEC 60320-1 applies without modification as far as is reasonable. Where this standard states
"addition", "modification" or "replacement", the relevant requirement, test specification or
explanatory matter in IEC 60320-1 should be adapted accordingly.
Subclauses which are additional to those in Part 1 are numbered starting from 101.
The committee has decided that the contents of this publication will remain unchanged until
2002-12. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60320-2-1 © IEC:2000 – 9 –
INTRODUCTION
Where in IEC 60320-1 the words "appliance coupler", "connector" or "appliance inlet" appear
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.