EN 61249-2-39:2013

Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

IEC 61249-2-39:2012 specifies requirements for properties of modified brominated epoxide woven E-glass laminated sheet of a thickness 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad. The glass transition temperature is defined to be 170 °C minimum.

Materialien für Leiterplatten und andere Verbindungsstrukturen - Teil 2-39: Kaschierte und unkaschierte verstärkte Basismaterialien - Kupferkaschierte mit E-Glasgewebe verstärkte Laminattafeln hochwertiger Qualität auf der Basis von Epoxidharz und Nicht-Epoxidharz mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage) für bleifreie Bestückungstechnik

Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-39: Matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées en tissu de verre de type E époxyde et non époxyde à haute performance, plaquées cuivre, d'inflammabilité définie (essai de combustion verticale), pour les assemblages sans plomb

La CEI 61249-2-39:2012 spécifie des exigences concernant les propriétés des feuilles stratifiées en tissu de verre de type E époxyde bromé modifié, plaquées cuivre, d'inflammabilité définie (essai de combustion verticale), et ayant une épaisseur comprise entre 0,05 mm et 3,2 mm. La température de transition vitreuse est définie comme étant de 170 °C au minimum.

Materiali za tiskane plošče in druge povezovalne strukture - 2-39. del: Pokovinjeni in nepokovinjeni ojačeni osnovni materiali - S stekleno tkanino ojačene laminirane plasti z določeno gorljivostjo (navpični preskus gorljivosti), obdelane z modificirano epoksidno ali neepoksidno smolo, pobakrene, za montažo brez svinca

Ta del standarda IEC 61249 določa zahteve za lastnosti s stekleno tkanino ojačenih pobakrenih laminiranih plasti z določeno gorljivostjo (navpični preskus gorljivosti), obdelanih z modificirano, bromirano epoksidno smolo, z debelino od 0,05 mm do 3,2 mm. Točka posteklenitve je opredeljena kot najmanj 170 °C. Odpornost proti plamenu je opredeljena v smislu zahtev glede vnetljivosti iz točke 7.3. Nekatere zahteve glede lastnosti lahko vključujejo več razredov lastnosti. Želeni razred naj bi bil opredeljen na naročilnici, sicer se dobavi privzeti razred materiala.

General Information

• Status: Published
• Publication Date: 21-Mar-2013
• Withdrawal Date: 02-Jan-2016
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Mar-2013
• Completion Date: 22-Mar-2013
• Ref Project: SIST EN 61249-2-39:2013 - Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61249-2-39:2013
01-junij-2013
0DWHULDOL]DWLVNDQHSORãþHLQGUXJHSRYH]RYDOQHVWUXNWXUHGHO3RNRYLQMHQL
LQQHSRNRYLQMHQLRMDþHQLRVQRYQLPDWHULDOL6VWHNOHQRWNDQLQRRMDþHQHODPLQLUDQH
SODVWL]GRORþHQRJRUOMLYRVWMRQDYSLþQLSUHVNXVJRUOMLYRVWLREGHODQH]
PRGLILFLUDQRHSRNVLGQRDOLQHHSRNVLGQRVPRORSREDNUHQH]DPRQWDåREUH]
VYLQFD
Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced
base materials clad and unclad - High performance epoxide and non-epoxide, woven E-
glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead
-free assembly
Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-39:
Matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées en tissu de
verre de type E époxyde et non époxyde à haute performance, plaquées cuivre,
d'inflammabilité définie (essai de combustion verticale), pour les assemblages sans
plomb
Ta slovenski standard je istoveten z: EN 61249-2-39:2013
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61249-2-39:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61249-2-39:2013

---------------------- Page: 2 ----------------------

SIST EN 61249-2-39:2013

EUROPEAN STANDARD
EN 61249-2-39

NORME EUROPÉENNE
March 2013
EUROPÄISCHE NORM

ICS 31.180


English version

Materials for printed boards and other interconnecting structures -
Part 2-39: Reinforced base materials clad and unclad -
High performance epoxide and non-epoxide, woven E-glass laminate
sheets of defined flammability (vertical burning test), copper-clad for lead-
free assembly
(IEC 61249-2-39:2012)

Matériaux pour circuits imprimés et autres Materialien für Leiterplatten und andere
structures d'interconnexion - Verbindungsstrukturen -
Partie 2-39: Matériaux de base renforcés, Teil 2-39: Kaschierte und unkaschierte
plaqués et non plaqués - verstärkte Basismaterialien -
Feuilles stratifiées en tissu de verre de Kupferkaschierte mit E-Glasgewebe
type E époxyde et non époxyde à haute verstärkte Laminattafeln hochwertiger
performance, plaquées cuivre, Qualität auf der Basis von Epoxidharz und
d'inflammabilité définie (essai de Nicht-Epoxidharz mit definierter
combustion verticale), pour les Brennbarkeit (Brennprüfung mit vertikaler
assemblages sans plomb Prüflingslage) für bleifreie
(CEI 61249-2-39:2012) Bestückungstechnik
(IEC 61249-2-39:2012)

This European Standard was approved by CENELEC on 2013-01-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61249-2-39:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61249-2-39:2013
EN 61249-2-39:2013 - 2 -
Foreword
The text of document 91/1052/FDIS, future edition 1 of IEC 61249-2-39, prepared by IEC TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61249-2-39:2013.

The following dates are fixed:
(dop) 2013-10-03
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-03
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights.
...