EN 60155:1995
(Main)Glow-starters for fluorescent lamps
Glow-starters for fluorescent lamps
Specifies interchangeable starters used with pre-heat type tubular fluorescent lamps and should be used in conjunction with corresponding publications for fluorescent lamps and their ballasts.
Glimmstarter für Leuchtstofflampen
Interrupteurs d'amorçage à lueur pour lampes à fluorescence (starters)
Destinée à couvrir les starters amovibles utilisés avec les lampes tubulaires fluorescentes à cathodes préchauffées et doit être utilisée conjointement avec les publications correspondantes concernant les lampes tubulaires à fluorescence et leurs ballasts.
Tlivni starterji za fluorescenčne sijalke (IEC 60155:1993)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60155:1999
01-julij-1999
7OLYQLVWDUWHUML]DIOXRUHVFHQþQHVLMDONH ,(&
Glow-starters for fluorescent lamps (IEC 60155:1993)
Glimmstarter für Leuchtstofflampen (IEC 60155:1993)
Interrupteurs d'amorçage à lueur pour lampes à fluorescence (starters) (CEI
60155:1993)
Ta slovenski standard je istoveten z: EN 60155:1995
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
SIST EN 60155:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60155:1999
---------------------- Page: 2 ----------------------
SIST EN 60155:1999
---------------------- Page: 3 ----------------------
SIST EN 60155:1999
---------------------- Page: 4 ----------------------
SIST EN 60155:1999
---------------------- Page: 5 ----------------------
SIST EN 60155:1999
---------------------- Page: 6 ----------------------
SIST EN 60155:1999
INTERNATIONAL IEC
STANDARD 60155
Fourth edition
1993-11
Glow-starters for fluorescent lamps
IEC 1993 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
S
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 60155:1999
155 ©IEC:1993 — 3 —
CONTENTS
Page
5
FOREWORD
7
INTRODUCTION
SECTION 1 — GENERAL AND SAFETY REQUIREMENTS
Clause
9 1 Scope
2 Normative references
3 Definitions 9
11
4 General requirements
11
5 General requirements for tests
11
6 Marking
13
7 Requirements and tests for safety
SECTION 2 — PERFORMANCE SPECIFICATION
21
8 Starting test
25
9 Endurance test
27
10 Deactivated lamp test
31
Figures
Annexes
41 A Ballasts to be used for life testing
43
ers for class II fluorescent lamp luminaires B Start
---------------------- Page: 8 ----------------------
SIST EN 60155:1999
155 ©I EC:1993 - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
GLOW-STARTERS FOR FLUORESCENT LAMPS
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the Nationàl Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
International Standard IEC 155 has been prepared by sub-committee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
This fourth edition cancels and replaces the third edition published in 1983 and amend-
ments 1 and 2, and constitutes a technical revision.
The test of this standard is based on the third edition, on the amendments 1 and 2 and on
the following documents:
DIS Report on voting
34A(CO)635 34A(CO)686
Full information on the voting for the approval of this standard can be found in the report
on v
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.