EN 60598-2-22:2014/A1:2020
(Amendment)Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
NEXT ACTION: CCMC to finalize publication
2019-11-13 PeC: BT approved the publication
2019-03-21 - GEM - TC discussed with consultant (C. Maes) at meeting (MArch 2019) - comments accepted - Annex ZA to be dated. Project has normative refverence to PR=63474, which creates a dependency.
2019-02-28 PC: to be flagged for LVD citation when ready
2018-12-17 PC: "Lack of compliance" for LVD, undated references in the Annex ZA and some points in the standards should be clarified
2017-11-21 - Negative assessment is received during CDV stage. Consultant assessment request is missing for FDIS.
Leuchten - Teil 2-22: Besondere Anforderungen - Leuchten für Notbeleuchtung
Luminaires - Partie 2-22: Exigences particulières - Luminaires pour éclairage de secours
Svetilke - 2-22. del: Posebne zahteve - Svetilke za zasilno razsvetljavo - Dopolnilo A1 (IEC 60598-2-22:2014/A1:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2020
Svetilke - 2-22. del: Posebne zahteve - Svetilke za zasilno razsvetljavo - Dopolnilo
A1 (IEC 60598-2-22:2014/A1:2017)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC
60598-2-22:2014/A1:2017)
Leuchten - Teil 2-22: Besondere Anforderungen - Leuchten für Notbeleuchtung (IEC
60598-2-22:2014/A1:2017)
Luminaires - Partie 2-22: Exigences particulières - Luminaires pour éclairage de secours
(IEC 60598-2-22:2014/A1:2017)
Ta slovenski standard je istoveten z: EN 60598-2-22:2014/A1:2020
ICS:
29.140.40 Svetila Luminaires
91.160.10 Notranja razsvetljava Interior lighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60598-2-22:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 29.140.40
English Version
Luminaires - Part 2-22: Particular requirements - Luminaires for
emergency lighting
(IEC 60598-2-22:2014/A1:2017)
Luminaires - Partie 2-22: Exigences particulières - Leuchten - Teil 2-22: Besondere Anforderungen - Leuchten
Luminaires pour éclairage de secours für Notbeleuchtung
(IEC 60598-2-22:2014/A1:2017) (IEC 60598-2-22:2014/A1:2017)
This amendment A1 modifies the European Standard EN 60598-2-22:2014; it was approved by CENELEC on 2019-12-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60598-2-22:2014/A1:2020 E
European foreword
The text of document 34D/1296/FDIS, future edition 1 of IEC 60598-2-22/A1, prepared by
IEC/TC 34D: Luminaires of IEC technical committee 34: Lamp and related equipment was submitted
to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60598-2-22:2014/A1:2020.
The following dates are fixed:
(dop) 2020-09-27
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-03-27
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 60598-2-22:2014/A1:2017 was approved by CENELEC as
a European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60364-5-56 NOTE Harmonized as HD 60364-5-56
Replace Annex ZA of EN 60598-2-22:2014 by the following one:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60073 - Basic and safety principles for man- EN 60073 2002
machine interface, marking and
identification - Coding principles for
indicators and actuators
IEC 60598-1 - Luminaires -- Part 1: General EN 60598-1 2015
requirements and tests
+ A1 2018
IEC 60896-21 - Stationary lead-acid batteries -- Part 21: EN 60896-21 2004
Valve regulated types - Methods of test
IEC 61056-1 - General purpose lead-acid batteries EN 61056-1 2012
(valve-regulated types) -- Part 1: General
requirements, functional characteristics -
Methods of test
IEC 61347-2-2 - Lamp controlgear -- Part 2-2: Particular EN 61347-2-2 2012
requirements for d.c. or a.c. supplied
electronic step-down convertors for
filament lamps
IEC 61347-2-3 - Lamp controlgear -- Part 2-3: Particular EN 61347-2-3 2011
requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent
lamps
+AC 2011
A1 2017
IEC 61347-2-7 - Lamp controlgear -- Part 2-7: Particular EN 61347-2-7 2012
requirements for battery supplied
+ FprA1 2017 (in
electronic controlgear for emergency
preparation)
lighting (self-contained)
IEC 61347-2-12 - Lamp controlgear - Part 2-12: Particular EN 61347-2-12 2005
requirements for d.c. or a.c. supplied
electronic ballasts for discharge lamps
(excluding fluorescent lamps)
A1 2010
Publication Year Title EN/HD Year
IEC 61347-2-13 - Lamp controlgear -- Part 2-13: Particular EN 61347-2-13 2014
requirements for d.c. or a.c. supplied
electronic controlgear for LED modules
A1 2017
IEC 61951-1 - Secondary cells and batteries containing EN 61951-1 2017
alkaline or other non-acid electrolytes -
Portable sealed rechargeable single cells
-- Part 1: Nickel-cadmium
IEC 61951-2 - Secondary cells and batteries containing EN 61951-2 2017
alkaline or other non-acid electrolytes -
Portable sealed rechargeable single cells
-- Part 2: Nickel-metal hydride
IEC 62034 - Automatic test systems for battery EN 62034 2012
powered emergency escape lighting
ISO 3864-1 2011 Graphical symbols_- Safety colours and - -
safety signs_- Part_1: Design principles
for safety signs and safety markings
ISO 3864-4 2011 Graphical symbols_- Safety colours and - -
safety signs_- Part_4: Colorimetric and
photometric properties of safety sign
materials
ISO 30061 2007 Emergency lighting - -
CIE 121 SPI - The Photometry and Goniophotometry of - -
Luminaires - Supplement 1: Luminaires
for Emergency Lighting
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European standard and Annex I of Directive
2014/35/EU [2014 OJ L96]
Clause(s) / sub-clause(s)
Safety objectives of Directive 2014/35/EU Remarks / Notes
of this EN
1. General conditions
a) the essential characteristics, the 22.6
recognition and observance of which will
22.17
ensure that electrical equipment will be used
safely and in applications for which it was
made, shall be marked on the electrical
equipment, or, if this is not possible, on an
accompanying document;
b) the electrical equipment, together with its All
component parts, shall be made in such a
way as to ensure that it can be safely and
properly assembled and connected;
c) the electrical equipment shall be so See item 2 and 3 of this
designed and manufactured as to ensure table
that protection against the hazards set out in
points 2 and 3 is assured, providing that the
equipment is used in applications for which it
was made and is adequately maintained.
2. Protection against hazards arising from
the electrical equipment
Measures of a technical nature shall be laid
down in accordance with point 1, in order to
ensure that:
Clause(s) / sub-clause(s)
Safety objectives of Directive 2014/35/EU Remarks / Notes
of this EN
a) persons and domestic animals are 22.7
adequately protected against the danger of
22.8
physical injury or other harm which might be
22.9
caused by direct or indirect contact;
22.10
22.11
22.12
22.15
22.20
EMF is not covered
b) temperatures, arcs or radiation which 22.7
would cause a danger, are not produced;
22.8
22.13
22.15
c) persons, domestic animals and property 22.7
are adequately protected against non-
22.15
electrical dangers caused by the electrical
22.8
equipment which are revealed by
22.18
experience;
22.20
22.21
d) the insulation is suitable for foreseeable 22.8
conditions.
22.14
22.15
22.20
3. Protection against hazards which may
be caused by external influences on the
electrical equipment
Technical measures shall be laid down in
accordance with point 1, in order to ensure
that the electrical equipment:
a) meets the expected mechanical 22.6
requirements in such a way that persons,
22.7
domestic animals and property are not
endangered;
b) is resistant to non-mechanical influences 22.14
in expected environmental conditions, in
22.16
such a way that persons, domestic animals
22.19
and property are not endangered;
c) does not endanger persons, domestic 22.7
animals and property in foreseeable
22.13
conditions of overload.
22.16
22.19
22.20
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
IEC 60598-2-22 ®
Edition 4.0 2017-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Luminaires –
Part 2-22: Particular requirements – Luminaires for emergency lighting
Luminaires –
Partie 2-22: Règles particulières – Luminaires pour éclairage de secours
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.40 ISBN 978-2-8322-4809-6
– 2 – IEC 60598-2-22:2014/AMD1:2017
© IEC 2017
FOREWORD
This amendment has been prepared by subcommittee 34D: Luminaires, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34D/1296/FDIS 34D/1304/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
INTRODUCTION to Amendment 1
The light output of LED light sources depends also on the temperature at which it is operated.
Typically the temperature is controlled by a heat sink on which it is mounted (e.g. luminaire
surface).
For this reason, the calculation of the ratio of the electrical parameter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.