iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60477-2:1979/AMD1:1997

(Amendment)

Amendment 1 - Laboratory resistors. Part 2: Laboratory a.c. resistors

Amendment 1 - Laboratory resistors. Part 2: Laboratory a.c. resistors

Amendement 1 - Résistances de laboratoire. Deuxième partie: Résistances de laboratoire à courant alternatif

General Information

Status
Published
Publication Date
16-Oct-1997
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
17.220.20 - Measurement of electrical and magnetic quantities
31.040.10 - Fixed resistors
Technical Committee
TC 85 - Measuring equipment for electrical and electromagnetic quantities
Current Stage
DELPUB - Deleted Publication
Completion Date
30-Mar-2022
Ref Project

Relations

Revised
IEC 60477-2:2022 - Laboratory resistors - Part 2: Laboratory AC resistors
Effective Date
05-Sep-2023

Buy Standard

IEC 60477-2:1979/AMD1:1997 - Amendment 1 - Laboratory resistors. Part 2: Laboratory a.c. resistorsIEC 60477-2:1979/AMD1:1997 - Amendment 1 - Laboratory resistors. Part 2: Laboratory a.c. resistors
PreviousNext
Standard
IEC 60477-2:1979/AMD1:1997 - Amendment 1 - Laboratory resistors. Part 2: Laboratory a.c. resistors
English and French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME
CEI
INTERNATIONALE
IEC
60477-2
INTERNATIONAL
1979
STANDARD
AMENDEMENT 1
AMENDMENT 1
1997-10
Amendement 1
Résistance de laboratoire –
Partie 2:
Résistance de laboratoire à courant alternatif
Amendment 1
Laboratory resistors –
Part 2:
Laboratory a.c. resistors
 
IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
B
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 1 ----------------------
– 2 – 60477-2 amend. 1  CEI:1997
AVANT-PROPOS
Le présent amendement a été établi par le comité d'études 85 de la CEI: Appareillage de
mesure des grandeurs électromagnétiques.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
85/167/FDIS 85/178/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
___________
Page 18
Annexe A
Remplacer dans les figures 1 et 2 le
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62153-4-16:2016(Main)
Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up

IEC 62153-4-16:2016(E) describes a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up according to IEC 62153-4-3 (method B) respectively IEC 62153-4-4. A similar approach to extrapolate the test results of transfer impedance to higher frequencies was already described in IEC 61196-1:1995 Subclause 12.2. This method is applicable for homogenous screens, i.e. screens having a transfer impedance directly proportional to length. The transfer impedance may have any frequency behaviour, i.e. it could have a behaviour where it does not increase with 20 dB per decade as observed for screens made of a foil and a braid.

  • Standard
    18 pages
    English language
    sale 15% off
IEC
IEC 63267-2-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled
SIST IEC 60072-1:2001

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres.
An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation.
Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60335-2-124:2024(Main)
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines

IEC 60335-2-124:2024 deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive.
The following power systems are covered:
- mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,
- battery-operated machines.
This standard does not apply to
- dry ice blasting machines with integrated generation of compressed air;
- dry ice blasting machines using other transport gases besides compressed air or nitrogen;
- dry ice blasting machines with nozzles being controlled by robotic arms;
- spray extraction machines for commercial use (IEC 60335-2-68);
- high pressure cleaners (IEC 60335-2-79);
- sand blasting equipment (abrasive blasting);
- hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series);
- machines designed for use in corrosive or explosive environments (dust, vapour or gas);
- machines designed for use in vehicles in non-ventilated environment;
- machines designed for use on board of ships or aircraft.

  • Standard
    66 pages
    English and French language
    sale 15% off
IEC
IEC TS 61934:2024(Main)
Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses

IEC TS 61934:2024 is available as IEC TS 61934:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.
Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.
NOTE Use of this document with specific products can require the application of additional procedures.
Excluded from the scope of this document are:
- methods based on optical or ultrasonic PD detection,
- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.
This edition includes the following significant technical changes with respect to the previous edition:
a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;
b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.
c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.
d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.

  • Technical specification
    27 pages
    English language
    sale 15% off
IEC
IEC 61360-7:2024(Main)
Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts

IEC 61360-7:2024 specifies the new data dictionary (domain) "IEC 61360-7 - General items" including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements, e.g. classes, properties) intended for cross-domain use.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
The IEC 61360-7 data dictionary is published in IEC CDD and is available at https://cdd.iec.ch.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
ISO/IEC 14543-5-104:2024(Main)
Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application

ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.
This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.

  • Standard
    28 pages
    English language
    sale 15% off
IEC
IEC 60695-2-10:2021/COR1:2024(Corrigendum)
Corrigendum 1 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
  • Standard
    4 pages
    English and French language
    sale 15% off
IEC
IEC 62841-4-5:2021/COR1:2024(Corrigendum)
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears

IEC 62841-4-5:2021 This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass.
This document does not apply to hedge trimmers.
Hedge trimmers are covered by IEC 62841-4-2.

  • Standard
    2 pages
    English and French language
    sale 15% off
IEC
IEC TS 62898-3-2:2024(Main)
Microgrids - Part 3-2: Technical requirements - Energy management systems

IEC TS 62898-3-2:2024 provides technical requirements for the operation of energy management systems of microgrids. This document applies to utility-interconnected or islanded microgrids. This document describes specific recommendations for low-voltage (LV) and medium-voltage (MV) systems.
This document focuses on developing standards of energy management systems aimed for microgrids integrated in decentralized energy systems or public distribution grids. It concerns some particularities that are not totally covered by the existing conventional energy system. The microgrid energy management systems are being studied by various actors (utilities, manufacturers, and energy providers) on actual demonstration projects and application use case. The aims of this document are to make the state of the art of existing energy management systems used in actual microgrids projects, to classify the relevant functions which can be accomplished by microgrid energy management systems, and to recommend necessary technical requirements for energy management systems of future microgrids.
This document includes the following items:
• main performances of key components of microgrid: decentralized energy resources, energy storages and controllable loads),
• description of main functions and topological blocks of microgrid energy management systems (MEMS),
• specification of information exchange protocol between main function blocks, linked to microgrid monitoring and control systems (MMCS).
Main functions of MEMS:
• power and energy management among different resources within microgrid including active and reactive power flows with different time scales,
• power and energy forecasts of microgrid,
• energy balancing between upstream grid and microgrid energy resources according to power and energy forecast and upstream and local constraints,
• economic and environmental optimization,
• possible service capacities such as capacity market auctions and resiliency anticipation: new business models,
• data archiving, trending, reporting and evaluation of operation capacities in various operation modes.
MEMS can have some other additional functions according to microgrid size and actual application cases:
• tariff and market trading management,
• utility ancillary services such as frequency regulation, voltage regulation, power quality and reliability improvement, demand response possibilities, change of operation modes linked to MMCS.

  • Technical specification
    70 pages
    English language
    sale 15% off
IEC
IEC TR 63463:2024(Main)
Life extension guidelines for HVDC converter stations

IEC TR 63463:2024 provides guidelines for the general procedure for performing life assessment for an HVDC converter station. Following this, a more detailed description of performance issues of the thyristor based HVDC systems is given and the life assessment measures of equipment and guidelines for accessing the techno-economic life of equipment are given. This document also deals with information for specification of refurbishing HVDC system and the testing of the refurbished and replaced equipment. Lastly, this document outlines environmental issues and regulatory issues involved in the life assessment and concludes with a financial analysis of the refurbishment options.

  • Technical report
    100 pages
    English language
    sale 15% off