Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests

IEC 60243-3:2013 gives requirements additional to those in IEC 60243-1 for the determination of the electric strength of solid insulating materials under 1,2/50 µs impulse voltage stress. This third edition cancels and replaces the second edition, published in 2001, and constitutes an editorial revision.
This publication is to be read in conjunction with IEC 60243-1:2013.

Rigidité diélectrique des matériaux isolants - Méthodes d'essai - Partie 3 : Exigences complémentaires pour les essais aux ondes de choc 1,2/50 µs

L'IEC 60243-3:2013 donne des exigences complémentaires à celles de la CEI 60243-1 pour la détermination de la rigidité diélectrique des matériaux isolants solides soumis à des tensions de choc 1,2/50 µs. Cette troisième édition annule et remplace la deuxième édition parue en 2001, et constitue une révision éditoriale.
Cette publication doit être lue conjointement avec la CEI 60243-1:2013.

General Information

Status
Published
Publication Date
25-Nov-2013
Current Stage
PPUB - Publication issued
Start Date
28-Feb-2014
Completion Date
26-Nov-2013
Ref Project

Relations

Buy Standard

Standard
IEC 60243-3:2013 - Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
English and French language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60243-3 ®
Edition 3.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric strength of insulating materials – Test methods –
Part 3: Additional requirements for 1,2/50 µs impulse tests

Rigidité diélectrique des matériaux isolants – Méthodes d’essai –
Partie 3: Exigences complémentaires pour les essais
aux ondes de choc 1,2/50 µs
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60243-3 ®
Edition 3.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric strength of insulating materials – Test methods –

Part 3: Additional requirements for 1,2/50 µs impulse tests

Rigidité diélectrique des matériaux isolants – Méthodes d’essai –

Partie 3: Exigences complémentaires pour les essais

aux ondes de choc 1,2/50 µs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 17.220.99; 29.035.01 ISBN 978-2-8322-1201-1

– 2 – 60243-3 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Significance of the test . 6
5 Electrodes and test specimens . 7
6 Conditioning before tests . 7
7 Surrounding medium . 7
8 Electrical apparatus . 7
8.1 Voltage source . 7
8.2 Voltage measurement . 8
9 Procedure . 8
10 Application of voltage . 8
10.1 Breakdown test . 8
10.2 Proof tests . 8
11 Criterion of breakdown . 9
12 Number of tests . 9
13 Report . 9

Figure 1 – Full impulse-voltage wave . 6

60243-3 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC STRENGTH OF INSULATING MATERIALS –
TEST METHODS –
Part 3: Additional requirements for 1,2/50 µs impulse tests

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60243-3 has been prepared by technical committee 112: Evaluation
and qualification of electrical insulation materials and systems.
This third edition cancels and replaces the second edition, published in 2001, and constitutes
an editorial revision.
This part of IEC 60243 shall be read in conjunction with IEC 60243-1.
The text of this standard is based on the following documents:
CDV Report on voting
112/246/CDV 112/267A/RVC
– 4 – 60243-3 © IEC:2013
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60243 series, published under the general title Electric strength of
insulating materials – Test methods, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60243-3 © IEC:2013 – 5 –
ELECTRIC STRENGTH OF INSULATING MATERIALS –
TEST METHODS –
Part 3: Additional requirements for 1,2/50 µs impulse tests

1 Scope
This part of IEC 60243 gives requirements additional to those in IEC 60243-1 for the
determination of the electric strength of solid insulating materials under 1,2/50 µs impulse
voltage stress.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
IEC 60243-1:2013, Electric strength of insulating materials – Test methods – Part 1: Tests at
power frequencies
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60243-1, together
with the following, apply.
3.1
full impulse-voltage wave
aperiodic transient voltage that rises rapidly to a maximum value, then falls less rapidly to zero
(see Figure 1)
3.2
peak value (of an impulse-voltage wave)
U
P
maximum value of voltage
3.3
virtual peak value (of an impulse-voltage wave)
U
value derived from a recording of an impulse-voltage wave on which high-frequency
oscillations, or overshoot of a limited magnitude, may be present
3.4
virtual origin (of an impulse-voltage wave)
O
point of intersection O with the line of zero voltage of a line drawn through the points of 0,3
and 0,9 times the virtual peak value on the front of an impulse-voltage wave (see Figure 1)

– 6 – 60243-3 © IEC:2013
3.5
virtual front time (of an impulse-voltage wave)
t
equal to 1,67 times the interval t between the instants whe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.