Power transformers - Part 16: Transformers for wind turbine applications

IEC 60076-16:2011 applies to dry-type and liquid-immersed transformers for rated power 100 kVA up to 10 000 kVA for wind turbine applications having a winding with highest voltage for equipment up to and including 36 kV and at least one winding operating at a voltage greater than 1,1 kV.

Transformateurs de puissance - Partie 16: Transformateurs pour applications éoliennes

La CEI 60076-11:2011 s'applique aux transformateurs de type sec et immergés dans un liquide, pour une puissance assignée comprise entre 100 kVA et 10 000 kVA, destinés à des applications éoliennes, ayant un enroulement avec une tension la plus élevée pour le matériel inférieure ou égale à 36 kV et au moins un enroulement fonctionnant à une tension supérieure à 1,1 kV.

General Information

Status
Replaced
Publication Date
24-Aug-2011
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
02-Oct-2018
Ref Project

Relations

Buy Standard

Standard
IEC 60076-16:2011 - Power transformers - Part 16: Transformers for wind turbine applications Released:8/25/2011
English and French language
72 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60076-16 ®
Edition 1.0 2011-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Power transformers –
Part 16: Transformers for wind turbine applications

Transformateurs de puissance –
Partie 16: Transformateurs pour applications éoliennes

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60076-16 ®
Edition 1.0 2011-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Power transformers –
Part 16: Transformers for wind turbine applications

Transformateurs de puissance –
Partie 16: Transformateurs pour applications éoliennes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 29.180 ISBN 978-2-88912-670-5

– 2 – 60076-16 © IEC:2011
CONTENTS
FOREWORD . 4

INTRODUCTION . 6

1 Scope . 7

2 Normative references . 7

3 Terms and definitions . 8

4 Service conditions . 8

4.1 Normal service conditions . 8

4.2 Altitude . 8
4.3 Temperature of cooling air . 8
4.4 Content of harmonic currents in the transformer . 9
4.5 Wave-shape of supply voltage . 9
4.6 Transient over and under voltages . 9
4.7 Humidity and salinity . 10
4.8 Special electrical and environmental conditions around the transformer . 10
4.9 Level of vibration . 11
4.10 Provision for unusual service conditions for transformers for wind turbine
applications . 11
4.11 Transportation and storage conditions . 11
4.12 Corrosion protection . 11
5 Electrical characteristics . 11
5.1 Rated power . 11
5.2 Highest voltage for equipment . 11
5.3 Tappings . 12
5.4 Connection group . 12
5.5 Dimensioning of neutral terminal . 12
5.6 Short circuit impedance . 12
5.7 Insulation levels for high voltage and low voltage windings . 12
5.8 Temperature rise guaranteed at rated conditions . 12
5.9 Overload capability . 13
5.10 Inrush current . 13
5.11 Ability to withstand short circuit . 13
5.12 Operation with forced cooling . 13
6 Rating plate . 13

7 Tests . 13
7.1 List and classification of tests (routine, type and special tests) . 13
7.2 Routine tests . 13
7.3 Type tests . 14
7.4 Special tests . 14
7.4.1 General . 14
7.4.2 Chopped wave test . 14
7.4.3 Electrical resonance frequency test . 14
7.4.4 Climatic tests . 14
7.4.5 Environmental test E3 . 14
7.4.6 Fire behavior test . 15
Annex A (informative) Calculation method and tables . 16
Bibliography . 36

60076-16 © IEC:2011 – 3 –
Figure A.1 – Heat dissipation in a natural ventilated room . 17

Figure A.2 – Schematic diagram of power frequency current injection apparatus . 30

Figure A.3 – Switched transformer winding voltage responses with capacitor injection . 31

Figure A.4 – HV Injection test figure . 32

Figure A.5 – Example of measurement device . 33

Table 1 – Insulation levels . 10

Table A.1 – Impact of harmonics content on liquid-immersed transformer losses . 23
Table A.2 – Impact of harmonics content on dry type transformers losses. 26
Table A.3 – Example of voltage harmonic order . 29

– 4 – 60076-16 © IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
POWER TRANSFORMERS –
Part 16: Transformers for wind turbine applications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.