IEC 60533:2015
(Main)Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
IEC 60533:2015(E) specifies minimum requirements for emission, immunity and performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships with metallic hull. This International Standard assists in meeting the relevant EMC requirements as stated in SOLAS 74, Chapter IV, Regulation 6 and Cha pter V, Regulation 17. Reference to this International Standard is made in IMO Resolution A.813(19). This edition includes the followi ng significant technical changes with respect to the previous edition:
- Introduction has been supplemented;
- scope and title have been modified to limit the application of the standard to installations in ships with metallic hulls only;
- the normative references have been updated;
- further explanation for in-situ testing has been given in 5.1;
- numbering of CISPR-Standards in Tables 1, 2 and 3 has been updated;
- title of Annex B has been changed;
- requirements on cable routing in Annex B have been amended;
- new Annex C EMC test report has been added.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60533 ®
Edition 3.0 2015-08
INTERNATIONAL
STANDARD
Electrical and electronic installations in ships – Electromagnetic compatibility
(EMC) – Ships with a metallic hull
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60533 ®
Edition 3.0 2015-08
INTERNATIONAL
STANDARD
Electrical and electronic installations in ships – Electromagnetic compatibility
(EMC) – Ships with a metallic hull
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.100; 33.100.10; 47.020 ISBN 978-2-8322-2849-4
– 2 – IEC 60533:2015 © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 14
5 EMC test plan . 15
5.1 Objective. 15
5.2 Configuration of equipment under test (EUT) . 15
5.2.1 General . 15
5.2.2 Assembly of EUT . 15
5.2.3 EUT interconnecting cables . 15
5.2.4 Auxiliary equipment . 15
5.2.5 Cabling and grounding . 15
5.3 Test pre-conditioning . 16
5.3.1 Operational conditions . 16
5.3.2 Environmental conditions . 16
5.3.3 Test software . 16
5.4 Acceptance criteria. 16
5.5 Scope of EMC testing . 16
6 Emission requirements. 17
6.1 Conditions during the emission tests . 17
6.2 Emission limits . 19
6.2.1 General . 19
6.2.2 Emission limits for equipment installed in the deck and bridge zone . 21
6.2.3 Emission limits for equipment installed in the general power distribution
zone . 21
6.2.4 Emission limits for equipment installed in the special power distribution
zone . 22
7 Immunity requirements . 22
7.1 Conditions during the immunity tests . 22
7.2 Minimum immunity requirements . 22
7.3 System aspects . 24
8 Test results and test report . 24
Annex A (informative) General EMC planning procedures . 25
A.1 Overview . 25
A.2 General procedures . 25
A.3 EMC management . 25
A.3.1 General . 25
A.3.2 EMC advisory group . 25
A.3.3 EMC management tasks . 26
A.3.4 Rough analysis . 26
A.3.5 EMC requirements for equipment . 27
A.3.6 EMC interface agreements . 27
A.3.7 Installation recommendations . 27
A.3.8 Assessment of conformity with EMC regulations . 27
A.3.9 Additional measures . 28
A.4 Full EMC analysis. 28
A.4.1 General . 28
A.4.2 Electromagnetic interference matrix (EMI matrix) . 28
A.4.3 Collection of data . 28
A.4.4 Data processing . 29
A.4.5 Completing the matrix . 33
A.4.6 Calculations . 34
A.4.7 Conclusions to be drawn from the matrix . 34
A.5 Additional EMC measures . 34
A.5.1 General . 34
A.5.2 Limitation of electromagnetic emission . 34
A.5.3 Limitation of electromagnetic influences . 35
A.6 EMC testing . 35
A.6.1 Equipment testing . 35
A.6.2 System testing . 35
Annex B (informative) Mitigation guidelines . 37
B.1 Applicability . 37
B.2 General technical measures . 37
B.2.1 General . 37
B.2.2 Equipment and installation groups . 38
B.2.3 Shielding. 38
B.2.4 Grounding . 38
B.2.5 Cable routing . 40
B.2.6 Filtering and overvoltage protection . 42
B.3 Special measures for equipment groups A to G . 44
B.3.1 General . 44
B.3.2 Measures for group A . 44
B.3.3 Measures for group B . 45
B.3.4 Measures for group C . 46
B.3.5 Measures for group D . 47
B.3.6 Measures for group E . 47
B.3.7 Measures for group F . 49
B.3.8 Measures for group G . 50
B.4 Organizational measures . 51
B.4.1 On-board operation . 51
B.4.2 Maintenance and repair . 51
Annex C (informative) EMC test report . 53
Bibliography . 54
Figure 1 – Examples for ports . 13
Figure 2 – Schematic diagram of zones (example) . 20
Figure A.1 – EMC analysis, flow chart . 31
Figure A.2 – EMC analysis, EMI matrix . 32
Figure A.3 – EMC analysis, frequency survey . 33
Figure A.4 – EMC analysis, level survey . 33
Table 1 – Equipment test matrix . 18
– 4 – IEC 60533:2015 © IEC 2015
Table 2 – Emission limits (deck and bridge zone) .
...
IEC 60533 ®
Edition 3.0 2015-08
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical and electronic installations in ships – Electromagnetic compatibility
(EMC) – Ships with a metallic hull
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60533 ®
Edition 3.0 2015-08
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical and electronic installations in ships – Electromagnetic compatibility
(EMC) – Ships with a metallic hull
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.100; 33.100.10; 47.020 ISBN 978-2-8322-2866-1
– 2 – IEC 60533:2015 RLV © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 14
5 EMC test plan . 15
5.1 Objective. 15
5.2 Configuration of equipment under test (EUT) . 15
5.2.1 General . 15
5.2.2 Assembly of EUT . 15
5.2.3 EUT interconnecting cables . 15
5.2.4 Auxiliary equipment . 15
5.2.5 Cabling and grounding . 16
5.3 Test pre-conditioning . 16
5.3.1 Operational conditions . 16
5.3.2 Environmental conditions . 16
5.3.3 Test software . 16
5.4 Acceptance criteria. 16
5.5 Scope of EMC testing . 17
6 Emission requirements. 17
6.1 Conditions during the emission tests . 17
6.2 Emission limits . 19
6.2.1 General . 19
6.2.2 Emission limits for equipment installed in the deck and bridge zone . 21
6.2.3 Emission limits for equipment installed in the general power distribution
zone . 21
6.2.4 Emission limits for equipment installed in the special power distribution
zone . 22
7 Immunity requirements . 22
7.1 Conditions during the immunity tests . 22
7.2 Minimum immunity requirements . 22
7.3 System aspects . 24
8 Test results and test report . 24
Annex A (informative) IMO Resolution A.813 (19):1995 .
Annex A (informative) General EMC planning procedures . 25
A.1 Introduction Overview . 25
A.2 General procedures . 25
A.3 EMC management . 25
A.3.1 General . 25
A.3.2 EMC advisory group . 25
A.3.3 EMC management tasks . 26
A.3.4 Rough analysis . 26
A.3.5 EMC requirements for equipment . 27
A.3.6 EMC interface agreements . 27
A.3.7 Installation recommendations . 27
A.3.8 Assessment of conformity with EMC regulations . 27
A.3.9 Additional measures . 28
A.4 Full EMC analysis. 28
A.4.1 General . 28
A.4.2 Electromagnetic interference matrix (EMI matrix) . 28
A.4.3 Collection of data . 28
A.4.4 Data processing . 29
A.4.5 Completing the matrix . 33
A.4.6 Calculations . 34
A.4.7 Conclusions to be drawn from the matrix . 34
A.5 Additional EMC measures . 34
A.5.1 General . 34
A.5.2 Limitation of electromagnetic emission . 34
A.5.3 Limitation of electromagnetic influences . 35
A.6 EMC testing . 35
A.6.1 Equipment testing . 35
A.6.2 System testing . 35
Annex B (informative) Measures to achieve EMC Mitigation guidelines . 36
B.1 Applicability . 36
B.2 General technical measures . 36
B.2.1 General . 36
B.2.2 Equipment and installation groups . 37
B.2.3 Sreening Shielding . 38
B.2.4 Grounding . 38
B.2.5 Cable routing . 39
B.2.6 Filtering and overvoltage protection . 41
B.3 Special measures for equipment groups A to G . 43
B.3.1 General . 43
B.3.2 Measures for group A . 43
B.3.3 Measures for group B . 44
B.3.4 Measures for group C . 45
B.3.5 Measures for group D . 46
B.3.6 Measures for group E . 46
B.3.7 Measures for group F . 48
B.3.8 Measures for group G . 49
B.4 Organizational measures . 50
B.4.1 On-board operation . 50
B.4.2 Maintenance and repair . 50
B.5 Reference documents .
Annex C (informative) EMC test report . 51
Bibliography . 52
Figure 1 – Examples for ports . 14
Figure 2 – Schematic diagram of zones (example) . 22
Figure A.1 – EMC analysis, flow chart . 34
Figure A.2 – EMC analysis, EMI matrix . 35
Figure A.3 – EMC analysis, frequency survey . 36
Figure A.4 – EMC analysis, level survey .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.