ISO/IEC 29341-4-13:2008

Information technology - UPnP Device Architecture - Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control Service

ISO/IEC 29341-4-13:2008(E) provides control points with the ability to query and/or adjust any rendering attribute that the device supports, such as control characteristics (e.g. brightness and contrast) and audio characteristics (e.g. volume, balance and equalizer settings). The series of ISO/IEC 29341 publications defines an architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices and PCs. It is designed to bring easy to use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces or attached to the Internet.

General Information

• Status: Published
• Publication Date: 27-Nov-2008
• ICS: 33.160.40 - Video systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 14-Sep-2011

Relations

• Revised: ISO/IEC 29341-4-13:2011 - Information technology - UPnP Device Architecture - Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control Service
• Effective Date: 05-Sep-2023

Standards Content (Sample)

ISO/IEC 29341-4-13
Edition 1.0 2008-11
INTERNATIONAL
STANDARD
Information technology – UPnP Device Architecture –
Part 4-13: Audio Video Device Control Protocol –
Level 2 – Rendering Control Service

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about ISO/IEC copyright or have an enquiry about obtaining additional rights to this
publication, please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
ISO/IEC 29341-4-13
Edition 1.0 2008-11
INTERNATIONAL
STANDARD
Information technology – UPnP Device Architecture –
Part 4-13: Audio Video Device Control Protocol –
Level 2 – Rendering Control Service
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 35.200 ISBN 978-2-88910-855-8

– 2 – 29341-4-13 © ISO/IEC:2008(E)
CONTENTS
FOREWORD .7
ORIGINAL UPNP DOCUMENTS (informative).9
1 Overview and Scope.11
1.1 Introduction.11
1.2 Multi-input Devices .11
1.3 Notation .11
1.3.1 Data Types.12
1.3.2 Strings Embedded in Other Strings .12
1.3.3 Extended Backus-Naur Form.12
1.4 Derived Data Types.13
1.4.1 Comma Separated Value (CSV) Lists .13
1.5 Management of XML Namespaces in Standardized DCPs .14
1.5.1 Namespace Prefix Requirements .16
1.5.2 Namespace Names, Namespace Versioning and Schema Versioning .17
1.5.3 Namespace Usage Examples.18
1.6 Vendor-defined Extensions .18
1.7 References .19
2 Service Modeling Definitions.22
2.1 Service Type.22
2.2 State Variables .22
2.2.1 LastChange.25
2.2.2 PresetNameList .26
2.2.3 Brightness .27
2.2.4 Contrast.27
2.2.5 Sharpness.27
2.2.6 RedVideoGain.27
2.2.7 GreenVideoGain .27
2.2.8 BlueVideoGain .27
2.2.9 RedVideoBlackLevel.27
2.2.10 GreenVideoBlackLevel .27
2.2.11 BlueVideoBlackLevel .28
2.2.12 ColorTemperature.28
2.2.13 HorizontalKeystone.28
2.2.14 VerticalKeystone .28
2.2.15 Mute .29
2.2.16 Volume.29
2.2.17 VolumeDB.29
2.2.18 Loudness.29
2.2.19 A_ARG_TYPE_Channel .29
2.2.20 A_ARG_TYPE_InstanceID .30
2.2.21 A_ARG_TYPE_PresetName .30
2.2.22 A_ARG_TYPE_DeviceUDN.30
2.2.23 A_ARG_TYPE_ServiceType .30
2.2.24 A_ARG_TYPE_ServiceID.31
2.2.25 A_ARG_TYPE_StateVariableValuePairs .31
2.2.26 A_ARG_TYPE_StateVariableList .31

29341-4-13 © ISO/IEC:2008(E) – 3 –
2.2.27 Relationships between State Variables .31
2.3 Eventing and Moderation .33
2.3.1 Event Model .34
2.4 Actions.35
2.4.1 ListPresets().36
2.4.2 SelectPreset() .36
2.4.3 GetBrightness().37
2.4.4 SetBrightness() .38
2.4.5 GetContrast() .38
2.4.6 SetContrast().39
2.4.7 GetSharpness().39
2.4.8 SetSharpness() .40
2.4.9 GetRedVideoGain() .40
2.4.10 SetRedVideoGain().41
2.4.11 GetGreenVideoGain() .41
2.4.12 SetGreenVideoGain() .42
2.4.13 GetBlueVideoGain().42
2.4.14 SetBlueVideoGain() .43
2.4.15 GetRedVideoBlackLevel().43
2.4.16 SetRedVideoBlackLevel().44
2.4.17 GetGreenVideoBlackLevel() .44
2.4.18 SetGreenVideoBlackLevel().45
2.4.19 GetBlueVideoBlackLevel().46
2.4.20 SetBlueVideoBlackLevel() .46
2.4.21 GetColorTemperature().47
2.4.22 SetColorTemperature() .47
2.4.23 GetHorizontalKeystone().48
2.4.24 SetHorizontalKeystone().48
2.4.25 GetVerticalKeystone().49
2.4.26 SetVerticalKeystone() .50
2.4.27 GetMute().50
2.4.28 SetMute() .51
2.4.29 GetVolume().51
2.4.30 SetVolume() .52
2.4.31 GetVolumeDB().53
2.4.32 SetVolumeDB() .53
2.4.33 GetVolumeDBRange() .54
2.4.34 GetLoudness() .55
2.4.35 SetLoudness().56
2.4.36 GetStateVariables() .56
2.4.37 SetStateVariables().57
2.4.38 Relationships Between Actions.58
2.4.39 Common Error Codes .59
2.5 Theory of Operation.60
2.5.1 Multi-input Devices.60
2.5.2 Presets.61
2.5.3 Controlling the Display of Visual Co
...