oSIST prEN 302 065-3-1 V3.1.1:2024

Short Range Devices (SRD) using Ultra Wide Band technology (UWB) - Harmonised standard for access to radio spectrum - Part 3: UWB devices installed in motor and railway vehicles - Sub-part 1: Requirements for UWB devices for vehicular access systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz

REN/ERM-TGUWB-150-3-1

Naprave kratkega dosega (SRD), ki uporabljajo ultra širokopasovno (UWB) tehnologijo - Harmonizirani standard za dostop do radijskega spektra - 3. del: Naprave UWB, vgrajene v motorna in železniška vozila - 1. poddel: Zahteve za ultra širokopasovne (UWB) naprave za avtomobilske sisteme za dostop v območju od 3,8 GHz do 4,2 GHz ali od 6 GHz do 8,5 GHz

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Oct-2024
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 43.040.15 - Car informatics. On board computer systems
• Technical Committee: MOC - Mobile Communications
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 05-Aug-2024
• Due Date: 23-Dec-2024
• Ref Project: ETSI EN 302 065-3-1 V3.1.0 (2021-07) - Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised standard for access to radio spectrum; Part 3: UWB devices installed in motor and railway vehicles; Sub-part 1:Requirements for UWB devices for vehicular access systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz

Standards Content (Sample)

Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD)
using Ultra Wide Band technology (UWB);
Harmonised standard for access to radio spectrum;
Part 3: UWB devices installed in motor and railway vehicles
Sub-part 1: Requirements for UWB devices
for vehicular access systems
2 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)

Reference
REN/ERM-TGUWB-150-3-1
Keywords
harmonised standard, SRD, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.
ETSI
3 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 12
4.1 Environmental profile . 12
4.2 Transmitter requirements . 12
4.2.1 General . 12
4.2.2 Operating Frequency Range (OFR) . 12
4.2.2.1 Applicability. 12
4.2.2.2 Description and general requirements . 12
4.2.2.3 Limits . 12
4.2.2.4 Conformance . 12
4.2.3 Mean e.i.r.p. spectral density . 12
4.2.3.1 Applicability. 12
4.2.3.2 Description . 12
4.2.3.3 Limits . 12
4.2.3.4 Conformance . 13
4.2.4 Peak e.i.r.p. spectral density. 13
4.2.4.1 Applicability. 13
4.2.4.2 Description . 13
4.2.4.3 Limits . 13
4.2.4.4 Conformance . 13
4.2.5 TX unwanted emissions . 13
4.2.5.1 Applicability. 13
4.2.5.2 Description . 13
4.2.5.3 Limits . 13
4.2.5.4 Conformance . 14
4.2.6 Duty Cycle . 14
4.2.6.1 Applicability. 14
4.2.6.2 Description . 14
4.2.6.3 Limits . 14
4.2.6.4 Conformance . 15
4.2.7 Trigger-before-transmit . 15
4.2.7.1 Applicability. 15
4.2.7.2 Description . 15
4.2.7.2.1 General . 15
4.2.7.2.2 Trigger event from use case perspective . 15
4.2.7.2.3 Trigger scenarios on EUT level . 16
4.2.7.2.4 Trigger Scenario 1: EUT is Responder Device . 16
4.5.7.2.5 Trigger Scenario 2: EUT is Initiator Device . 16
4.2.7.2.6 General requirements . 17
4.2.7.3 Limits . 17
4.2.7.4 Conformance . 18
4.3 Receiver requirements . 18
4.3.1 General . 18
ETSI
4 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)
4.3.2 Wanted Technical Performance Criteria . 18
4.3.2.1 Wanted Technical Performance Criterion 1 . 18
4.3.2.2 Wanted Technical Performance Criterion 2 . 19
4.3.3 Receiver spurious emissions . 20
4.3.3.1 Applicability. 20
4.3.3.2 Description . 20
4.3.3.3 Limits . 20
4.3.3.4 Conformance . 21
4.3.4 Receiver Baseline Sensitivity (RBS) . 21
4.3.4.1 Applicability. 21
4.3.4.2 Description . 21
4.3.4.3 Limits . 21
4.3.4.4 Conformance . 21
4.3.5 Receiver Baseline Resilience (RBR) . 21
4.3.5.1 Applicability. 21
4.3.5.2 Description . 22
4.3.5.3 Limits . 22
4.3.5.4 Conformance .
...

Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD)
using Ultra Wide Band technology (UWB);
Harmonised standard for access to radio spectrum;
Part 3: UWB devices installed in motor and railway vehicles;
Sub-part 1: Requirements for UWB devices for vehicular

access systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz

2 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)

Reference
REN/ERM-TGUWB-150-3-1
Keywords
harmonised standard, SRD, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 11
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Type of equipment and EUT categories . 13
4.2.1 Type of equipment . 13
4.2.2 EUT categories for Equipment Type 1 (vehicle transceivers) . 13
4.2.3 Summary of equipment types and EUT categories . 14
4.3 Transmitter requirements . 14
4.3.1 General . 14
4.3.2 Operating Frequency Range (OFR) . 14
4.3.2.1 Applicability. 14
4.3.2.2 Description and general requirements . 14
4.3.2.3 Limits . 15
4.3.2.4 Conformance . 15
4.3.3 Mean e.i.r.p. spectral density . 15
4.3.3.1 Applicability. 15
4.3.3.2 Description . 15
4.3.3.3 Limits . 15
4.3.3.4 Conformance . 15
4.3.4 Peak e.i.r.p. spectral density. 15
4.3.4.1 Applicability. 15
4.3.4.2 Description . 15
4.3.4.3 Limits . 16
4.3.4.4 Conformance . 16
4.3.5 TX unwanted emissions . 16
4.3.5.1 Applicability. 16
4.3.5.2 Description . 16
4.3.5.3 Limits . 16
4.3.5.4 Conformance . 17
4.3.6 Duty Cycle . 17
4.3.6.1 Applicability. 17
4.3.6.2 Description . 17
4.3.6.3 Limits . 17
4.3.6.4 Conformance . 17
4.3.7 Trigger-before-transmit . 17
4.3.7.1 Applicability. 17
4.3.7.2 Description . 18
4.3.7.2.1 General . 18
4.3.7.2.2 Trigger event from use case perspective . 18
4.3.7.2.3 Trigger scenarios on EUT level . 18
4.3.7.2.4 Trigger Scenario 1: Equipment Type 1A . 18
4.3.7.2.5 Trigger Scenario 2: Equipment Type 1B . 19
4.3.7.2.6 General requirements . 19
ETSI
4 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)
4.3.7.3 Limits . 20
4.3.7.4 Conformance . 20
4.3.8 TX behaviour under the complete environmental profile . 20
4.3.8.1 Applicability. 20
4.3.8.2 Description . 20
4.3.8.3 Limits . 20
4.3.8.4 Conformance . 20
4.4 Receiver requirements . 21
4.4.1 General . 21
4.4.2 Wanted Technical Performance Criteria . 21
4.4.2.1 Wanted Technical Performance Criterion 1 . 21
4.4.2.2 Wanted Technical Performance Criterion 2 . 22
4.4.3 Receiver spurious emissions . 22
4.4.3.1 Applicability. 22
4.4.3.2 Description . 22
4.4.3.3 Limits . 23
4.4.3.4 Conformance .
...

SLOVENSKI STANDARD
oSIST prEN 302 065-3-1 V3.1.0:2021
01-oktober-2021
Naprave kratkega dosega (SRD), ki uporabljajo ultra širokopasovno (UWB)
tehnologijo - Harmonizirani standard za dostop do radijskega spektra - 3. del:
Naprave UWB, vgrajene v motorna in železniška vozila - 1. poddel: Zahteve za ultra
širokopasovne (UWB) naprave za avtomobilske sisteme za dostop
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) - Harmonised
standard for access to radio spectrum - Part 3: UWB devices installed in motor and
railway vehicles - Sub-part 1: Requirements for UWB devices for vehicular access
systems
Ta slovenski standard je istoveten z: ETSI EN 302 065-3-1 V3.1.0 (2021-07)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
oSIST prEN 302 065-3-1 V3.1.0:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 302 065-3-1 V3.1.0:2021

oSIST prEN 302 065-3-1 V3.1.0:2021
Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD)
using Ultra Wide Band technology (UWB);
Harmonised standard for access to radio spectrum;
Part 3: UWB devices installed in motor and railway vehicles
Sub-part 1: Requirements for UWB devices
for vehicular access systems
oSIST prEN 302 065-3-1 V3.1.0:2021

2 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)

Reference
REN/ERM-TGUWB-150-3-1
Keywords
harmonised standard, SRD, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.
ETSI
oSIST prEN 302 065-3-1 V3.1.0:2021

3 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 12
4.1 Environmental profile . 12
4.2 Transmitter requirements . 12
4.2.1 General . 12
4.2.2 Operating Frequency Range (OFR) . 12
4.2.2.1 Applicability. 12
4.2.2.2 Description and general requirements . 12
4.2.2.3 Limits . 12
4.2.2.4 Conformance . 12
4.2.3 Mean e.i.r.p. spectral density . 12
4.2.3.1 Applicability. 12
4.2.3.2 Description . 12
4.2.3.3 Limits . 12
4.2.3.4 Conformance . 13
4.2.4 Peak e.i.r.p. spectral density. 13
4.2.4.1 Applicability. 13
4.2.4.2 Description . 13
4.2.4.3 Limits . 13
4.2.4.4 Conformance . 13
4.2.5 TX unwanted emissions . 13
4.2.5.1 Applicability. 13
4.2.5.2 Description . 13
4.2.5.3 Limits . 13
4.2.5.4 Conformance . 14
4.2.6 Duty Cycle . 14
4.2.6.1 Applicability. 14
4.2.6.2 Description . 14
4.2.6.3 Limits . 14
4.2.6.4 Conformance . 15
4.2.7 Trigger-before-transmit . 15
4.2.7.1 Applicability. 15
4.2.7.2 Description . 15
4.2.7.2.1 General . 15
4.2.7.2.2 Trigger event from use case perspective . 15
4.2.7.2.3 Trigger scenarios on EUT level . 16
4.2.7.2.4 Trigger Scenario 1: EUT is Responder Device . 16
4.5.7.2.5 Trigger Scenario 2: EUT is Initiator Device . 16
4.2.7.2.6 General requirements . 17
4.2.7.3 Limits . 17
4.2.7.4 Conformance . 18
4.3 Receiver requirements . 18
4.3.1 General . 18
ETSI
oSIST prEN 302 065-3-1 V3.1.0:2021

4 Draft ETSI EN 302 065-3-1 V3.1.0 (2021-07)
4.3.2 Wanted Technical Performance Criteria . 18
4.3.2.1 Wanted Technical Performance Criterion 1 . 18
4.3.2.2 Wanted Technical Performance Criterion 2 . 19
4.3.3 Receiver spurious emissions . 20
4.3.3.1 Applicability. 20
4.3.3.2 Description . 20
4.3.3.3 Limits . 20
4.3.3.4 Conformance . 21
4.3.4 Receiver Baseline Sensitivity (RBS) . 21
4.3.4.1 Applicability.
...

SLOVENSKI STANDARD
01-oktober-2024
Naprave kratkega dosega (SRD), ki uporabljajo ultra širokopasovno (UWB)
tehnologijo - Harmonizirani standard za dostop do radijskega spektra - 3. del:
Naprave UWB, vgrajene v motorna in železniška vozila - 1. poddel: Zahteve za ultra
širokopasovne (UWB) naprave za avtomobilske sisteme za dostop v območju od
3,8 GHz do 4,2 GHz ali od 6 GHz do 8,5 GHz
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) - Harmonised
standard for access to radio spectrum - Part 3: UWB devices installed in motor and
railway vehicles - Sub-part 1: Requirements for UWB devices for vehicular access
systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz
Ta slovenski standard je istoveten z: ETSI EN 302 065-3-1 V3.1.1 (2024-07)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD)
using Ultra Wide Band technology (UWB);
Harmonised standard for access to radio spectrum;
Part 3: UWB devices installed in motor and railway vehicles;
Sub-part 1: Requirements for UWB devices for vehicular

access systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz

2 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)

Reference
REN/ERM-TGUWB-150-3-1
Keywords
harmonised standard, SRD, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 11
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Type of equipment and EUT categories . 13
4.2.1 Type of equipment . 13
4.2.2 EUT categories for Equipment Type 1 (vehicle transceivers) . 13
4.2.3 Summary of equipment types and EUT categories . 14
4.3 Transmitter requirements . 14
4.3.1 General . 14
4.3.2 Operating Frequency Range (OFR) . 14
4.3.2.1 Applicability. 14
4.3.2.2 Description and general requirements . 14
4.3.2.3 Limits . 15
4.3.2.4 Conformance . 15
4.3.3 Mean e.i.r.p. spectral density . 15
4.3.3.1 Applicability. 15
4.3.3.2 Description . 15
4.3.3.3 Limits . 15
4.3.3.4 Conformance . 15
4.3.4 Peak e.i.r.p. spectral density. 15
4.3.4.1 Applicability. 15
4.3.4.2 Description . 15
4.3.4.3 Limits . 16
4.3.4.4 Conformance . 16
4.3.5 TX unwanted emissions . 16
4.3.5.1 Applicability. 16
4.3.5.2 Description . 16
4.3.5.3 Limits . 16
4.3.5.4 Conformance . 17
4.3.6 Duty Cycle . 17
4.3.6.1 Applicability. 17
4.3.6.2 Description . 17
4.3.6.3 Limits . 17
4.3.6.4 Conformance . 17
4.3.7 Trigger-before-transmit . 17
4.3.7.1 Applicability. 17
4.3.7.2 Description . 18
4.3.7.2.1 General . 18
4.3.7.2.2 Trigger event from use case perspective . 18
4.3.7.2.3 Trigger scenarios on EUT level . 18
4.3.7.2.4 Trigger Scenario 1: Equipment Type 1A . 18
4.3.7.2.5 Trigger Scenario 2: Equipment Type 1B . 19
4.3.7.2.6 General requirements . 19
ETSI
4 Draft ETSI EN 302 065-3-1 V3.1.1 (2024-07)
4.3.7.3 Limits . 20
4.3.7.4 Conformance . 20
4.3.8 TX behaviour under the complete environmental profile . 20
4.3.8.1 Applicability. 20
4.3.8.2 Description . 20
4.3.8.3 Limits . 20
4.3.8.4 Conformance . 20
4.4 Rece
...