SIST EN 12493:2008/kFprA1:2011

LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture

This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker tanks and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This European Standard does not cover tanks for tank containers.
NOTE 1   In the context of this standard the term "road tanker" is understood to mean “fixed tanks” and “demountable tanks” as defined in ADR.
NOTE 2   The equipment of the tanks and the inspection and testing after assembly is covered by EN 12252, and EN 14334, respectively.
NOTE 3   The design type of the road tanker is subject to the approval by the competent authority, as required by ADR.

Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Flüssiggas (LPG) - Konstruktion und Herstellung von Straßentankfahrzeugen

Équipements pour GPL et leurs accessoires - Réservoirs en acier soudés pour gaz de pétrole liquéfié (GPL) - Conception et construction des camions-citernes

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varjene jeklene posode za utekočinjeni naftni plin (UNP) - Cestne cisterne - Konstruiranje in izdelava - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Dec-2011
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• ICS: 43.080.10 - Trucks and trailers
• Technical Committee: TLP - Pressure vessels
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 03-Apr-2012
• Due Date: 08-Apr-2012
• Completion Date: 03-Apr-2012
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Directive: 94/55/EC - Transport of dangerous goods by road
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: EN 12493:2008/FprA1 - LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture

Relations

• Consolidated By: SIST EN 12493:2008+A1:2012 - LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12493:2008 - LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture
• Effective Date: 19-Jun-2010
• Consolidated By: SIST EN 12493:2008+A1:2012 - LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 12493:2008+A1:2012 - LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture
• Effective Date: 01-May-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12493:2008/kFprA1:2011
01-november-2011
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ8139DUMHQHMHNOHQHSRVRGH]D
XWHNRþLQMHQLQDIWQLSOLQ813&HVWQHFLVWHUQH.RQVWUXLUDQMHLQL]GHODYD
'RSROQLOR$
LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) -
Road tankers - Design and manufacture
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für
Flüssiggas (LPG) - Konstruktion und Herstellung von Straßentankfahrzeugen
Équipements pour GPL et leurs accessoires - Réservoirs en acier soudés pour gaz de
pétrole liquéfié (GPL) - Conception et construction des camions-citernes
Ta slovenski standard je istoveten z: EN 12493:2008/FprA1
ICS:
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
43.080.10 Tovornjaki in priklopniki Trucks and trailers
SIST EN 12493:2008/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12493:2008/kFprA1:2011

---------------------- Page: 2 ----------------------

SIST EN 12493:2008/kFprA1:2011


EUROPEAN STANDARD
FINAL DRAFT
EN 12493:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
September 2011
ICS 23.020.30
English Version
LPG equipment and accessories - Welded steel tanks for
liquefied petroleum gas (LPG) - Road tankers - Design and
manufacture
Équipements pour GPL et leurs accessoires - Réservoirs Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte
en acier soudés pour gaz de pétrole liquéfié (GPL) -
Druckbehälter aus Stahl für Flüssiggas (LPG) -
Conception et construction des camions-citernes Konstruktion und Herstellung von Straßentankfahrzeugen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 286.

This draft amendment A1, if approved, will modify the European Standard EN 12493:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12493:2008/FprA1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12493:2008/kFprA1:2011
EN 12493:2008/FprA1:2011 (E)
Contents Page
Foreword .3
1 Modification to the Introduction .4
2 Modification to Clause 3 .4
2.1 Modification to 3.5 .4
2.2 Modification to 3.6 .4
2.3 Modification to 3.8 .4
2.4 Add new term and definition 3.9 .4
3 Modification to Clause 4 .5
3.1 Addition of a new subclause 4.1 .5
3.2 Modification to new subclause 4.2.5
3.3 Modification to new subclause 4.4.5
4 Modification to Clause 5 .5
4.1 Modification to subclause 5.1 .5
4.2 Modification to subclause 5.2 .5
5 Modification to subclause 6.4 .5
6 Modification to Clause 8 .6
6.1 Addition of new subclause 8.2 .6
6.2 Modification to old subclause 8.4.2, Hot forming .6
6.3 Modification to old subclause 8.5.8, Preheat .6
6.4 Modification to old subclause 8.6, Post-weld heat treatment .6
6.5 Modification to old subclause 8.7, Manufacturing tolerances .7
6.6 Modification to old subclause 8.8.1, General requirements .7
7 Modification to Clause 10 .7
7.1 Modification to subclause 10.4.3 .7
7.2 Modification to subclause 10.4.4 .7
8 Modification to Clause 11 .7
9 Modification to Table A.1 .7
10 Modification to B.2 .7
11 Modification to C.2 .8
12 Modification to Annex L .8
12.1 Modification to Figure L.1. .8
12.2 Modification to Table L.1 .8
13 New informative Annex M . 11
14 Modification to Bibliography . 12

2

---------------------- Page: 4 ----------------------

SIST EN 12493:2008/kFprA1:2011
EN 12493:2008/FprA1:2011 (E)
Foreword
This document (EN 12493:2008/FprA1:2011) has been prepared by Technical Committee CEN/TC 286 “LPG
equipment and accessories”, the secretariat of which is held by NSAI.
This document is currently submitted to the Unique Acceptance Procedure.
The amendment to the 2008 version includes:
 Update of LPG terminology,
 Environmental aspects, see Annex M.
3

---------------------- Page: 5 ----------------------

SIST EN 12493:2008/kFprA1:2011
EN 12493:2008/FprA1:2011 (E)
1 Modification to the Introduction
Add new text after the existing text in the Introduction.
"Protection of the environment is a key political issue in Europe and elsewhere. Protection of the environment
is taken in a very broad sense. What is meant is the total life cycle aspects of, e.g. a product on the
environment, including expenditure of energy and during all phases from mining of raw materials, fabrication,
packaging, distribution, use, scrapping, recycling of materials, etc. Annex M lists the clause where an
environmental impact has been considered.
It is recommended that manufacturers develop an environmental management policy. For guidance see
ISO 14000 series.".
2 Modification to Clause 3
2.1 Modification to 3.5
Add the following note after the definition:
"NOTE Also referred to as a 'fixed tank' in the ADR.".
2.2 Modification to 3.6
In definition 3.6 for competent authority, replace "by its government" with "in accordance with national
regulation" to read:
"authority designated as such in each country in accordance with national regulation".
2.3 Modification to 3.8
Delete exiting definition 3.8 for competent person, and replace with the following definition:
"person who, by combination of appropriate qualification, training, experience, and resources, is able to make
objective judgments on the subject".
2.4 Add new term and definition 3.9
Add new term and definition 3.9 for LPG:
"3.9
liquefied petroleum gas
LPG
one or more light hydrocarbons which are assigned to UN 1011, UN 1075, UN 1965, UN 1969 or UN 1978
only and which consists mainly of propane, propene, butane, butane isomers, butene or traces of other
hydrocarbon gases".
4

---------------------- Page: 6 ----------------------

SIST EN 12493:2008/kFprA1:2011
EN 12493:2008/FprA1:2011 (E)
3 Modification to Clause 4
3.1 Addition of a new subclause 4.1
Insert new subclause 4.1 and renumber subsequent subclauses:
"4.1 Environmental
The manufacturer shall endeavour to acquire materials and components from suppliers who have
...