SIST EN 10208-2:1998

Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B

This European Standard EN 10208-2 specifies the technical delivery conditions for unalloyed and alloyed (except stainless) seamless and welded steel pipes. It includes quality and testing requirements higher than those specified in EN 10208 Part 1. EN 10208-2 applies for pipes which are normally used fot the transmission of combustible fluids. The maximum allowable operating pressure is given in the corresponding design code.

Stahlrohre für Rohrleitungen für brennbare Medien - Technische Lieferbedingungen - Teil 2: Rohre der Anforderungsklasse B

Diese Europäische Norm EN 10208-2 legt die technischen Lieferbedingungen für unlegierte und legierte (ausgenommen nichtrostende), nahtlose und geschweißte Stahlrohre fest. Sie enthält Qualitäts- und Prüfanforderungen, die über die in EN 10208-1 festgelegten hinausgehen. EN 10208-2 gilt für Rohre, die üblicherweise für den Transport brennbarer Medien bestimmt sind. Der zulässige Betriebsdruck wird in den entsprechenden Auslegungsvorschriften angegeben.

Tubes en acier pour conduites de fluides combustibles - Conditions techniques de livraison - Partie 2: Tubes de la classe de prescription B

La présente norme européenne EN 10208-2 donne les conditions techniques de livraison de tubes soudés et sans soudure, en acier (sauf inoxydable) allié et non allié. Elle inclut des prescriptions de qualité et d'essai plus strictes que celles de la norme EN 10208-1 et s'applique a des tubes normalement utilisés pour transporter des fluides combustibles. La pression de travail maximale admissible est donnée dans le code de calcul correspondant.

Jeklene cevi za cevovode za prenos plinastih in tekočih goriv - Tehnični dobavni pogoji - 2. del: Cevi razreda zahtevnosti B

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-1998
• Withdrawal Date: 27-Apr-2009
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Apr-2009
• Due Date: 24-Apr-2009
• Completion Date: 28-Apr-2009
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: EN 10208-2:1996 - Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B

Relations

• Replaced By: SIST EN 10208-2:2009 - Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 2: Pipes of requirement class B
• Effective Date: 01-Jun-2009
• Revises: oSIST prEN ISO 3183:2007 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO/FDIS 3183:2006)
• Effective Date: 18-Jan-2023
• Corrected By: SIST EN 10208-2:1998/AC:1998 - Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
• Effective Date: 01-Aug-1998
• Revises: oSIST prEN ISO 3183:2007 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO/FDIS 3183:2006)
• Effective Date: 19-Jan-2023
• Corrected By: SIST EN 10208-2:1998/AC:1998 - Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
• Effective Date: 08-Jun-2022
• Revises: oSIST prEN ISO 3183:2007 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO/FDIS 3183:2006)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlrohre für Rohrleitungen für brennbare Medien - Technische Lieferbedingungen - Teil 2: Rohre der Anforderungsklasse BTubes en acier pour conduites de fluides combustibles - Conditions techniques de livraison - Partie 2: Tubes de la classe de prescription BSteel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 10208-2:1996SIST EN 10208-2:1998en01-avgust-1998SIST EN 10208-2:1998SLOVENSKI
STANDARD



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN 10208-2:1998



SIST EN
...