oSIST prEN IEC 61010-2-202:2020

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of electrically operated valve ACTUATORs and SOLENOIDs. This document does not cover functional safety aspects of electrically operated ACTUATORs and SOLENOIDs.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à commande électrique

IEC 61010-2-202:2020 est disponible sous forme de IEC 61010-2-202:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61010-2-202:2020 constitue la Partie 2-202 d'une série de normes planifiées sur les appareils de mesure, commande et automation dans les processus industriels. Les termes de sécurité d'usage général sont définis dans l'IEC 61010-1. Des termes plus spécifiques sont définis dans chaque partie. Cette partie contient les exigences relatives à la sécurité des ACTIONNEURS et SOLENOÏDES à vanne à commande électrique. Le présent document ne couvre pas les aspects de sécurité fonctionnelle des ACTIONNEURS et SOLENOÏDES à commande électrique.

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61010-2-202:2020
01-april-2020
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov

Safety requirements for electrical equipment for measurement, control and laboratory

use - Part 2-202: Particular requirements for electrically operated valve actuators

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2

-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe

Règles de sécurité pour appareils électriques de mesurage, de régulation et de

laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à

commande électrique
Ta slovenski standard je istoveten z: prEN IEC 61010-2-202:2020
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
23.060.01 Ventili na splošno Valves in general
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
oSIST prEN IEC 61010-2-202:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61010-2-202:2020
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61010-2-202:2020
65/784/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61010-2-202 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-01-31 2020-04-24
SUPERSEDES DOCUMENTS:
65/760/CD,65/778A/CC
IEC TC 65 : INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION
SECRETARIAT: SECRETARY:
France Mr Rudy BELLIARDI
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 66
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Safety requirements for electrical equipment for measurement, control and laboratory use - Part

2-202: Particular requirements for electrically operated valve actuators
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:

Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61010-2-202:2020
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61010-2-202:2020
65/784/CDV – 2 – IEC 61010-2-202:2019  IEC 20xx
1 CONTENTS

2 CONTENTS ............................................................................................................................ 2

3 FOREWORD ........................................................................................................................... 3

4 INTRODUCTION ..................................................................................................................... 5

5 1 Scope and object ............................................................................................................. 6

6 2 Normative references ...................................................................................................... 7

7 3 Terms and definitions ...................................................................................................... 7

8 4 Tests ............................................................................................................................... 7

9 5 Marking and documentation ............................................................................................. 8

10 6 Protection against electric shock ..................................................................................... 9

11 7 Protection against mechanical HAZARDS ........................................................................... 9

12 8 Resistance to mechanical stresses ................................................................................ 10

13 9 Protection against the spread of fire .............................................................................. 10

14 10 Equipment temperature limits and resistance to heat ..................................................... 10

15 11 Protection against HAZARDS from fluids and solid foreign objects ................................... 10

16 12 Protection against radiation, including laser sources, and against sonic and

17 ultrasonic pressure ........................................................................................................ 11

18 13 Protection against liberated gases and substances, explosion and implosion ................ 11

19 14 Components and subassemblies ................................................................................... 11

20 15 Protection by interlocks ................................................................................................. 11

21 16 HAZARDS resulting from application ................................................................................ 11

22 17 RISK assessment ........................................................................................................... 11

23 Annexes ............................................................................................................................... 12

24 Bibliography .......................................................................................................................... 13

---------------------- Page: 5 ----------------------
oSIST prEN IEC 61010-2-202:2020
IEC 61010-2-202:2019  IEC 20xx – 3 – 65/784/CDV
27 INTERNATIONAL ELECTROTECHNICAL COMMISSION
28 ____________
30 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT
31 FOR MEASUREMENT, CONTROL AND LABORATORY USE –
33 Part 2-202: Particular requirements
34 for electrically operated valve actuators
36 FOREWORD

37 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

38 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

39 international co-operation on all questions concerning standardization in the electrical and electronic fields. To

40 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

41 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

42 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

43 in the subject dealt with may participate in this preparatory work. International, governmental and non-

44 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

45 with the International Organization for Standardization (ISO) in accordance with conditions determined by

46 agreement between the two organizations.

47 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

48 consensus of opinion on the relevant subjects since each technical committee has representation from all

49 interested IEC National Committees.

50 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

51 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

52 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

53 misinterpretation by any end user.

54 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

55 transparently to the maximum extent possible in their national and regional publications. Any divergence

56 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

57 the latter.

58 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

59 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

60 services carried out by independent certification bodies.

61 6) All users should ensure that they have the latest edition of this publication.

62 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

63 members of its technical committees and IEC National Committees for any personal injury, property damage or

64 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

65 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

66 Publications.

67 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

68 indispensable for the correct application of this publication.

69 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

70 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

71 International Standard IEC 61020-2-202 has been prepared by committee TC 65: Industrial-

72 process measurement, control and automation.

73 This second edition cancels and replaces the first edition published in 2016. This edition constitutes a

74 technical revision.

75 This edition includes the following significant technical changes with respect to the previous

76 edition:
77 a) the scope has been clarified in relationship with other IEC standards
78 b) additional requirement for identification has been included
79 c) additional requirement for user documentations has been included
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61010-2-202:2020
65/784/CDV – 4 – IEC 61010-2-202:2019  IEC 20xx
80 d) accuracy of high voltage di-electric tester has been specified.
81 e) conformity statement for mechanical tests has been clarified
82 The text of this standard is based on the following documents:
CD Report on voting
IEC 61010-2-201 Ed2.0 65/xxx/RVC

84 Full information on the voting for the approval of this standard can be found in the report on

85 voting indicated in the above table.

86 This Part 2-202 is to be used in conjunction with third edition of IEC 61010-1 (2010), including

87 its amendment 1 (2016).

88 This Part 2-202 supplements or modifies the corresponding clauses in IEC 61010-1 so as to

89 convert that publication into the IEC standard: Particular requirements for electrically operated

90 valve actuators.

91 Where a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

92 as far as is reasonable. Where this part states “addition”, “modification”, “replacement”, or

93 “deletion”, the relevant requirement, test specification or note in Part 1 should be adapted

94 accordingly.

95 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

96 A list of all parts in the IEC 61010 series, published under the general title Safety

97 requirements for electrical equipment for measurement, control and laboratory use, can be

98 found on the IEC website.
99 In this standard:
100 1) the following print types are used:
101 – requirements: in roman type;
102 – NOTES: in smaller roman type;
103 – conformity and test: in italic type;

104 – terms used throughout this standard which have been defined in clause 3: SMALL

105 ROMAN CAPITALS;

106 2) subclauses, figures, tables and notes which are additional to those in part 1 are numbered

107 starting from 101. Additional annexes are lettered starting from AA.

108 The committee has decided that the contents of this publication will remain unchanged until

109 the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

110 related to the specific publication. At this date, the publication will be
111 • reconfirmed,
112 • withdrawn,
113 • replaced by a revised edition, or
114 • amended.
115
116
---------------------- Page: 7 ----------------------
oSIST prEN IEC 61010-2-202:2020
IEC 61010-2-202:2019  IEC 20xx – 5 – 65/784/CDV
117 INTRODUCTION

118 This IEC 61010-2-202 document constitutes Part 2-202 of a planned series of standards on

119 industrial-process measurement, control and automation equipment.

120 Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in

121 each part.

122 This part incorporates the safety related requirements of electrically operated valve actuators.

123 This standard does not cover
...