EN IEC 61010-2-202:2021

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of electrically operated valve ACTUATORs and SOLENOIDs. This document does not cover functional safety aspects of electrically operated ACTUATORs and SOLENOIDs.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à commande électrique

IEC 61010-2-202:2020 est disponible sous forme de IEC 61010-2-202:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61010-2-202:2020 constitue la Partie 2-202 d'une série de normes planifiées sur les appareils de mesure, commande et automation dans les processus industriels. Les termes de sécurité d'usage général sont définis dans l'IEC 61010-1. Des termes plus spécifiques sont définis dans chaque partie. Cette partie contient les exigences relatives à la sécurité des ACTIONNEURS et SOLENOÏDES à vanne à commande électrique. Le présent document ne couvre pas les aspects de sécurité fonctionnelle des ACTIONNEURS et SOLENOÏDES à commande électrique.

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov (IEC 61010-2-202:2020)

General Information

• Status: Published
• Publication Date: 14-Jan-2021
• ICS: 13.110 - Safety of machinery
• ICS: 17.020 - Metrology and measurement in general
• ICS: 19.020 - Test conditions and procedures in general
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/TC 65 - IEC_TC_65
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Jan-2021
• Completion Date: 15-Jan-2021
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: SIST EN IEC 61010-2-202:2021 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC 61010-2-202:2020)

Relations

• Replaces: EN 61010-2-202:2017 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61010-2-202:2021
01-april-2021
Nadomešča:
SIST EN 61010-2-202:2017
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov (IEC 61010-2-
202:2020)
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC
61010-2-202:2020)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe (IEC
61010-2-202:2020)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à
commande électrique (IEC 61010-2-202:2020)
Ta slovenski standard je istoveten z: EN IEC 61010-2-202:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
23.060.01 Ventili na splošno Valves in general
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN IEC 61010-2-202:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61010-2-202:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61010-2-202:2021


EUROPEAN STANDARD EN IEC 61010-2-202

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2021
ICS 13.110; 17.020; 19.020 Supersedes EN 61010-2-202:2017 and all of its
amendments and corrigenda (if any)
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-202: Particular requirements
for electrically operated valve actuators
(IEC 61010-2-202:2020)
Règles de sécurité pour appareils électriques de mesurage, Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
de régulation et de laboratoire - Partie 2-202: Exigences Regel- und Laborgeräte - Teil 2-202: Besondere
particulières pour les actionneurs à vanne à commande Anforderungen für elektrisch betriebene Ventile und
électrique Stellantriebe
(IEC 61010-2-202:2020) (IEC 61010-2-202:2020)
This European Standard was approved by CENELEC on 2020-12-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61010-2-202:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61010-2-202:2021
EN IEC 61010-2-202:2021 (E)
European foreword
The text of document 65/835/FDIS, future edition 2 of IEC 61010-2-202, prepared by IEC/TC 65
“Industrial-process measurement, control and automation” was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61010-2-202:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021–09–10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023–12–10
document have to be withdrawn
This document supersedes EN 61010-2-202:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Associati
...