SIST EN 15085-2:2020/kFprA1:2023
(Amendment)Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 2: Anforderungen an Schweißbetriebe
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie 2 : Exigences de qualité du constructeur
Nos cope available
Železniške naprave - Varjenje železniških vozil in komponent - 2. del: Zahteve za proizvajalca varilnih naprav - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15085-2:2020/oprA1:2022
01-februar-2022
Železniške naprave - Varjenje železniških vozil in komponent - 2. del: Zahteve za
proizvajalca varilnih naprav - Dopolnilo A1
Railway applications - Welding of railway vehicles and components - Part 2:
Requirements for welding manufacturer
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 2:
Anforderungen an Schweißbetriebe
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
2 : Exigences de qualité du constructeur
Ta slovenski standard je istoveten z: EN 15085-2:2020/prA1
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15085-2:2020/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15085-2:2020/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN 15085-2:2020/oprA1:2022
DRAFT
EUROPEAN STANDARD
EN 15085-2:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2021
ICS 25.160.01; 45.060.01
English Version
Railway applications - Welding of railway vehicles and
components - Part 2: Requirements for welding
manufacturer
Applications ferroviaires - Soudage des véhicules et des Bahnanwendungen - Schweißen von
composants ferroviaires - Partie 2 : Exigences de Schienenfahrzeugen und -fahrzeugteilen - Teil 2:
qualité du constructeur Anforderungen an Schweißbetriebe
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 15085-2:2020. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15085-2:2020/prA1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15085-2:2020/oprA1:2022
EN 15085-2:2020/prA1:2021 (E)
European foreword
This document (EN 15085-2:2020/prA1:2021) has been prepared by Technical Committee CEN/TC 256
“Railway applications” the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
2
---------------------- Page: 4 ----------------------
SIST EN 15085-2:2020/oprA1:2022
EN 15085-2:2020/prA1:2021 (E)
1 Modification to Introduction
Replace the current introduction by the following:
Welding is a special process in the manufacture of railway vehicles and their parts. The required
provisions for this process are laid down in the standards series EN ISO 3834. The basis of these
provisions is the basic technical welding standards with respect to the special requirements for the
construction of railway vehicles.
This series of documents applies to welding of metallic materials in the manufacture and maintenance of
railway vehicles and their parts.
It describes the control for the welding process for railway vehicles and their components for new
manufacture and maintenance.”
With
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.