SIST EN 2573:2022

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Wires
0,25 mm ≤ De ≤ 3 mm
Rm ≤ 780 MPa
for aerospace application.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Drähte - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

No Scope available

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Fils - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

No Scope available

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Žice - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

General Information

• Status: Published
• Public Enquiry End Date: 30-Nov-2020
• Publication Date: 10-Nov-2022
• ICS: 49.025.10 - Steels
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 26-Oct-2022
• Due Date: 31-Dec-2022
• Completion Date: 11-Nov-2022
• Ref Project: EN 2573:2022 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

RELATIONS

• Revised: SIST EN 2573:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm <= 780 MPa - Wire - 0,25 mm <= De <= 3 mm
• Effective Date: 11-Dec-2018
• Replaces: SIST EN 2573:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm <= 780 MPa - Wire - 0,25 mm <= De <= 3 mm
• Effective Date: 26-Oct-2022

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 2573:2022
01-december-2022
Nadomešča:
SIST EN 2573:2007

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Žice -

0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25

mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -

Drähte - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Fils - 0,25

mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Ta slovenski standard je istoveten z: EN 2573:2022
ICS:
49.025.10 Jekla Steels
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN 2573:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2573:2022
---------------------- Page: 2 ----------------------
SIST EN 2573:2022
EN 2573
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2573:2007
English Version
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Wires - 0,25 mm  D  3 mm - R 
e m
780 MPa

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -

Élaboré à l'air - Adouci - Fils - 0,25 mm  D  3 mm - Lufterschmolzen - Weichgeglüht - Drähte - 0,25 mm 

R  780 MPa D  3 mm - R  780 MPa
m e m
This European Standard was approved by CEN on 8 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2573:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2573:2022
EN 2573:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography ................................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
SIST EN 2573:2022
EN 2573:2022 (E)
European foreword

This document has been prepared by the Aerospace and Defence Industries Association of Europe —

Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this document has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, eith
...

SLOVENSKI STANDARD
oSIST prEN 2573:2020
01-november-2020

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Žice -

0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25

mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -

Drähte - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Fils - 0,25

mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Ta slovenski standard je istoveten z: prEN 2573
ICS:
49.025.10 Jekla Steels
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN 2573:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2573:2020
---------------------- Page: 2 ----------------------
oSIST prEN 2573:2020
DRAFT
EUROPEAN STANDARD
prEN 2573
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 49.025.10 Will supersede EN 2573:2007
English Version
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤
780 MPa

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -

Élaboré à l'air - Adouci - Fils - 0,25 mm ≤ De ≤ 3 mm - Lufterschmolzen - Weichgeglüht - Drähte - 0,25 mm ≤

Rm ≤ 780 MPa De ≤ 3 mm - Rm ≤ 780 MPa

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2573:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 2573:2020
prEN 2573:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction ..................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions .................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography .................................................................
...