SIST EN 60851-3:2009/A1:2014

Winding wires - Test methods - Part 3: Mechanical properties

This part of IEC 60851 specifies the following methods of test for winding wires:
– Test 6: Elongation;
– Test 7: Springiness;
– Test 8: Flexibility and adherence;
– Test 11: Resistance to abrasion;
– Test 18: Heat bonding.
For definitions, general notes on methods of test and the complete series of methods of test for winding wires, see IEC 60851-1.

Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften

Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques

Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti - Dopolnilo A1 (IEC 60851-3:2009/A1:2013)

General Information

• Status: Published
• Publication Date: 16-Jan-2014
• ICS: 29.060.10 - Wires
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Jan-2014
• Due Date: 24-Mar-2014
• Completion Date: 17-Jan-2014
• Ref Project: EN 60851-3:2009/A1:2013 - Winding wires - Test methods - Part 3: Mechanical properties

Relations

• Amends: SIST EN 60851-3:2009 - Winding wires - Test methods -- Part 3: Mechanical properties
• Effective Date: 28-Jan-2023
• Revised: SIST EN IEC 60851-3:2023 - Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2023)
• Effective Date: 10-May-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60851-3:2009/A1:2014
01-februar-2014
Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti - Dopolnilo A1 (IEC
60851-3:2009/A1:2013)
Winding wires - Test methods - Part 3: Mechanical properties
Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques
Ta slovenski standard je istoveten z: EN 60851-3:2009/A1:2013
ICS:
29.060.10 Žice Wires
SIST EN 60851-3:2009/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60851-3:2009/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 60851-3:2009/A1:2014

EUROPEAN STANDARD
EN 60851-3/A1

NORME EUROPÉENNE
September 2013
EUROPÄISCHE NORM

ICS 29.060.10


English version


Winding wires -
Test methods -
Part 3: Mechanical properties
(IEC 60851-3:2009/A1:2013)


Fils de bobinage -  Wickeldrähte -
Méthodes d'essai - Prüfverfahren -
Partie 3: Propriétés mécaniques Teil 3: Mechanische Eigenschaften
(CEI 60851-3:2009/A1:2013) (IEC 60851-3:2009/A1:2013)





This amendment A1 modifies the European Standard EN 60851-3:2009; it was approved by CENELEC on 2013-
09-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60851-3:2009/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60851-3:2009/A1:2014
EN 60851-3:2009/A1:2013 - 2 -
Foreword
The text of document 55/1392/FDIS, future IEC 60851-3:2009/A1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60851-3:2009/A1:2013.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-06-04
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2016-09-04
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60851-3:2009/A1:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60851-3:2009/A1:2014




IEC 60851-3

®


Edition 3.0 2013-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside



AMENDMENT 1

AMENDEMENT 1





Winding wires – Test methods –

Part 3: Mechanical properties




Fils de bobinage – Méthodes d'essai –

Partie 3: Propriétés mécaniques
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX H


ICS 29.060.10 ISBN 978-2-8322-1004-8



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60851-3:2009/A1:2014
– 2 – 60851-3 Amend. 1 © IEC:2013
FOREWORD
This amendment has been prepared by IEC technical
...