SIST EN 60352-7:2003
(Main)Solderless connections -- Part 7: Spring clamp connections - General requirements, test methods and practical guidance
Solderless connections -- Part 7: Spring clamp connections - General requirements, test methods and practical guidance
Determines the suitability of spring-clamp connections under specified mechanical, electrical and atmospheric conditions. Lays down test procedures to ensure electrically stable connections under prescribed environmental conditions and provides information on materials and data from industrial experience
Lötfreie Verbindungen -- Teil 7: Federklemmverbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise
Connexions sans soudure -- Partie 7: Connexions à ressort - Règles générales, méthodes d'essai et guide pratique
Cette norme existe uniquement en langue anglaise
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (IEC 60352-7:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60352-7:2003
01-oktober-2003
Solderless connections - Part 7: Spring clamp connections - General
requirements, test methods and practical guidance (IEC 60352-7:2002)
Solderless connections -- Part 7: Spring clamp connections - General requirements, test
methods and practical guidance
Lötfreie Verbindungen -- Teil 7: Federklemmverbindungen - Allgemeine Anforderungen,
Prüfverfahren und Anwendungshinweise
Connexions sans soudure -- Partie 7: Connexions à ressort - Règles générales,
méthodes d'essai et guide pratique
Ta slovenski standard je istoveten z: EN 60352-7:2002
ICS:
29.120.20 Spojni elementi Connecting devices
SIST EN 60352-7:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60352-7:2003
---------------------- Page: 2 ----------------------
SIST EN 60352-7:2003
EUROPEAN STANDARD EN 60352-7
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2002
ICS 31.220.10
English version
Solderless connections
Part 7: Spring clamp connections -
General requirements, test methods and practical guidance
(IEC 60352-7:2002)
Connexions sans soudure Lötfreie Verbindungen
Partie 7: Connexions à ressort - Teil 7: Federklemmverbindungen -
Règles générales, méthodes d'essai Allgemeine Anforderungen, Prüfverfahren
et guide pratique und Anwendungshinweise
(CEI 60352-7:2002) (IEC 60352-7:2002)
This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60352-7:2002 E
---------------------- Page: 3 ----------------------
SIST EN 60352-7:2003
EN 60352-7:2002 - 2 -
Foreword
The text of document 48B/1228/FDIS, future edition 1 of IEC 60352-7, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60352-7 on 2002-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-10-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60352-7:2002 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60352-7:2003
- 3 - EN 60352-7:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-581 1978 International Electrotechnical - -
A1 1998 Vocabulary (IEV)
Chapter 581: Electromechanical
components for electronic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.