SIST EN IEC 62969-2:2018

Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors (IEC 62969-2:2018)

This part of IEC 62969 specifies procedures and definitions for measuring the efficiency of the
wireless power transmission system for the automotive vehicles sensors. This document deals
with the power range below 500 mW.

Halbleiterbauelemente – Halbleiterschnittstelle für Automobile – Teil 2: Verfahren zur Effizienz-Bewertung drahtloser Leistungsübertragung mittels Resonanz bei Automobil-Sensoren

Dispositifs à semiconducteurs – Interface à semiconducteurs pour les véhicules automobiles - Partie 2: Méthodes d’évaluation du rendement de la transmission d’énergie sans fil par résonance pour les capteurs de véhicules automobiles

L’IEC 62969-2:2018 spécifie les modes opératoires et les définitions permettant de mesurer le rendement du système de transmission d’énergie sans fil pour les capteurs de véhicules automobiles. Le présent document couvre la plage de puissance située au-dessous de 500 mW.

Polprevodniški elementi - Polprevodniški vmesnik za motorna vozila - 2. del: Metode za vrednotenje učinkovitosti brezžičnega napajanja z uporabo resonance v zaznavalih motornih vozil (IEC 62969-2:2018)

V tem delu standarda IEC 62969 so določeni postopki in opredelitve za merjenje učinkovitosti sistema brezžičnega prenosa energije za tipala v avtomobilih. Ta dokument obravnava razpon moči pod 500 mW.

General Information

• Status: Published
• Publication Date: 14-May-2018
• ICS: 31.080.01 - Semiconductor devices in general
• ICS: 43.040.10 - Electrical and electronic equipment
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-May-2018
• Due Date: 12-Jul-2018
• Completion Date: 15-May-2018
• Ref Project: EN IEC 62969-2:2018 - Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62969-2:2018
01-julij-2018
3ROSUHYRGQLãNLHOHPHQWL3ROSUHYRGQLãNLYPHVQLN]DPRWRUQDYR]LODGHO
0HWRGH]DYUHGQRWHQMHXþLQNRYLWRVWLEUH]åLþQHJDQDSDMDQMD]XSRUDERUHVRQDQFHY
]D]QDYDOLKPRWRUQLKYR]LO,(&
Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2:
Efficiency evaluation methods of wireless power transmission using resonance for
automotive vehicles sensors (IEC 62969-2:2018)
Ta slovenski standard je istoveten z: EN IEC 62969-2:2018
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
43.040.10 (OHNWULþQDLQHOHNWURQVND Electrical and electronic
RSUHPD equipment
SIST EN IEC 62969-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62969-2:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62969-2:2018


EUROPEAN STANDARD EN IEC 62969-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2018
ICS 31.080.99

English Version
Semiconductor devices - Semiconductor interface for automotive
vehicles - Part 2: Efficiency evaluation methods of wireless
power transmission using resonance for automotive vehicles
sensors
(IEC 62969-2:2018)
Dispositifs à semiconducteurs - Interface à Halbleiterbauelemente - Halbleiterschnittstelle für
semiconducteurs pour les véhicules automobiles - Partie 2: Automobile - Teil 2: Verfahren zur Effizienz-Bewertung
Méthodes d'évaluation du rendement de la transmission drahtloser Leistungsübertragung mittels Resonanz bei
d'énergie sans fil par résonance pour les capteurs de Automobil-Sensoren
véhicules automobiles (IEC 62969-2:2018)
(IEC 62969-2:2018)
This European Standard was approved by CENELEC on 2018-04-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62969-2:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62969-2:2018
EN IEC 62969-2:2018 (E)
European foreword
The text of document 47/2450/FDIS, future edition 1 of IEC 62969-2, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62969-2:2018.

The following dates are fixed:
(dop) 2019-01-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-04-12
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62969-2:2018 was approved by CENELEC as a European
Standard without any modification.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62969-2:2018




IEC 62969-2

®


Edition 1.0 2018-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Semiconductor devices – Semiconductor interface for automotive vehicles –

Part 2: Efficiency evaluation methods of wireless power transmission using

resonance for automotive vehicles sensors




Dispositifs à semiconducteurs – Interface à semiconducteurs pour les véhicules

automobiles –


Partie 2: Méthodes d’évaluation du rendement de la transmission d’énergie sans

fil par résonance pour les capteurs de véhicules automobiles












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 31.080.99 ISBN 978-2-8322-5442-4



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN IEC 62969-2:2018
– 2 – IEC 62969-2:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Testing methods . 6
4.1 General . 6
4.2 RF power generation efficiency . 7
4.3 RF coupling efficiency . 8
4.4 RF rectifying efficiency . 9
4.5 DC-DC converting efficiency . 10
4.6 System efficiency . 11

Figure 1 – Schematic diagram of wireless power transmission system . 7
Figure 2 – Measurement schematics for RF power generation efficiency . 8
Figure 3 – Measurement schematics for RF coupling efficiency . 9
Figure 4 – Measurement schematics for RF rectifying efficiency . 10
Figure 5 – Measurement schematics for DC-DC converting efficiency . 10

---------------------- Page: 6 ----------------------

SIST EN IEC 62969-2:2018
IEC 62969-2:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SEMICONDUCTOR DEVICES –
SEMICONDUCTOR INTERFACE FOR AUTOMOTIVE VEHICLES –

Part 2: Efficiency evaluation methods of wireless power transmission
using resonance for automotive vehicles sensors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62969-2 has been prepared by IEC technical committee 47:
Sem
...