Installation of post-tensioned kits for prestressing of structures – Part 2: Assessment of personnel

This document indicates the minimum training and registration requirements for post-tensioning personnel involved in the installation of post-tensioning kits in concrete structures using bonded or unbonded tendons in accordance with the relevant execution specifications, product standard and/or European Technical Assessment (ETA) contract specification.
A CEN technical standard does not deal with contracts, but the specification (in this case the execution specification).
This document describes the tasks that the various categories of post-tensioning personnel can undertake.
For the purposes of this document, post-tensioning personnel means: (Site-)Manager, Supervisors, Operatives and Trainees who are directly or indirectly employed on a sub-contract basis.
This document does not cover safety and health aspects.
This document does not cover contractual issues.
Part 2 of this standard deals with the assessment of competence.
Note: It is within the concept of this standard that supplementing requirements can be given in the execution specification or in a national annex.

Ausführung von Arbeiten von Spannverfahren mit nachträglichem Verbund in Tragwerken - Teil 2: Bewertung der Personalkompetenz

Dieses Dokument legt das Schema für Bewertung und Verifizierung der Kompetenz von Personal, das PT-Bausätze einbaut, fest.
Das Dokument enthält Bestimmungen für die Ausbildungsanbieter, Bewertungsstellen und möglichen Zertifizierungsstellen.
Anforderungen an die Mindestkompetenz und -erfahrung des Personals, das PT-Bausätze einbaut, sind in EN 17678-1 enthalten.
Dieses Dokument kann durch einen nationalen Anhang ergänzt werden, wenn dies im Text angegeben ist.

Mise en oeuvre de kits de post-tension pour la précontrainte des structures - Partie 2 : Évaluation du personnel

Le présent document spécifie le plan pour l’évaluation et la vérification des compétences du personnel chargé de la mise en oeuvre des kits de précontrainte par post-tension.
Il fournit des dispositions pour les organismes de formation, les organismes d’évaluation et les éventuels organismes de certification.
Les compétences et l’expérience minimales que doit avoir le personnel chargé de la mise en oeuvre des kits de précontrainte par post-tension sont indiquées dans l'EN 17678-1.
Le présent document peut être modifié par une annexe nationale lorsque cela est indiqué dans le texte.

Vgradnja sistemov za naknadno prednapenjanje konstrukcij - 2. del: Ocenjevanje usposobljenosti osebja

General Information

Status
Not Published
Public Enquiry End Date
29-Jun-2022
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
14-Apr-2022
Due Date
01-Sep-2022
Completion Date
05-Jul-2022

Buy Standard

Draft
prEN 17678-2:2022
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17678-2:2022
01-junij-2022
Vgradnja sistemov za naknadno prednapenjanje konstrukcij - 2. del: Ocenjevanje
usposobljenosti osebja

Installation of post-tensioned kits for prestressing of structures – Part 2: Assessment of

personnel
Ausführung von Arbeiten von Spannverfahren mit nachträglichem Verbund in
Tragwerken - Teil 2: Bewertung der Personalkompetenz
Ta slovenski standard je istoveten z: prEN 17678-2
ICS:
03.100.30 Vodenje ljudi Management of human
resources
91.080.40 Betonske konstrukcije Concrete structures
oSIST prEN 17678-2:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17678-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17678-2:2022
DRAFT
EUROPEAN STANDARD
prEN 17678-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 03.100.30; 91.080.40
English Version
Installation of post-tensioned kits for prestressing of
structures - Part 2: Assessment of personnel

Mise en œuvre de kits de post-tension pour la Ausführung von Arbeiten von Spannverfahren mit

précontrainte des structures - Partie 2 : Évaluation du nachträglichem Verbund in Tragwerken - Teil 2:

personnel Bewertung der Personalkompetenz

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 104.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17678-2:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17678-2:2022
prEN 17678-2:2022 (E)
Contents

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 Competence assessment for certification .................................................................................... 7

4.1 Training provider ................................................................................................................................. 7

4.2 Assessment body ................................................................................................................................... 8

4.3 Assessment of PT personnel following completion of training to agreed level ............. 8

4.4 Re-assessment of PT personnel ....................................................................................................... 8

5 Certificates .............................................................................................................................................. 9

---------------------- Page: 4 ----------------------
oSIST prEN 17678-2:2022
prEN 17678-2:2022 (E)
European foreword

This document (prEN 17678-2:2022) has been prepared by Technical Committee CEN/TC 104 “Concrete

and related products”, the secretariat of which is held by SN.
This document is currently submitted to the CEN Enquiry.
---------------------- Page: 5 ----------------------
oSIST prEN 17678-2:2022
prEN 17678-2:2022 (E)
Introduction

EN 17678-2 supersedes CEN Workshop Agreement CWA 14646:2003 “Requirements for the installation

of post-tensioning kits for prestressing of structures and qualification of specialist company and its

personnel” as concerns the parts related to assessment of personnel installing PT kits.

CWA 14646 recommended that the training provider should issue certificates attesting the acquired skill

of the PT personnel.

To ensure a general acceptance of such certificates, EN 17678-2 describes a procedure in accordance with

EN ISO/IEC 17024.

The main motivating factors for creating a European standard on competence of personnel and

assessment/ certification of their skills are:
— safety and quality considerations during the installation of the kits;
— safeguarding the integrity of structures during their service life;

— to facilitate free movement of PT personnel, both between PT specialist companies and member

states.
EN 17678 consists of two parts:

— Part 1 deals with the minimum requirements to competence personnel dealing with PT installations,

and on the tasks the personnel are qualified to undertake;

— Part 2 gives the framework for how to assess the competence of PT personnel and issue certificates

to candidates fulfilling the requirements.
---------------------- Page: 6 ----------------------
oSIST prEN 17678-2:2022
prEN 17678-2:2022 (E)
1 Scope

This document specifies the scheme for assessment and verification of competence of personnel

installing post-tensioning kits.

The document provides provisions for the training providers, assessment bodies and possible

certification bodies.

Requirements to the minimum competence and experience for personnel installing post-tensioning kits

are given in prEN 17678-1:2021.
This document may be amended with a national annex where indicated in the text.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN ISO/IEC 17024, Conformity assessment – General requirements for bodies operating certification of

persons

prEN 17678-1:2021, Installation of post-tensioned kits for prestressing of structures – Part 1: Competence

of personnel
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.