Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings

This part of the EN 13230 series defines additional technical criteria and control procedures as well as specific tolerance limits related to manufacturing and testing prestressed bearers for switches and crossings with a maximum length of 8,5 m.
Bearers longer than 8,5 m are considered as special elements and will comply with FprEN 13230 5:2015.

Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4: Spannbetonschwellen für Weichen und Kreuzungen

Applications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports précontraints pour appareil de voie

Železniške naprave - Zgornji ustroj proge - Betonski pragi in kretniški betonski pragi - 4. del: Prednapeti betonski pragi za kretnice in križišča - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
20-Feb-2019
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
24-Feb-2020
Due Date
29-Feb-2020
Completion Date
24-Feb-2020

RELATIONS

Buy Standard

Amendment
SIST EN 13230-4:2016/oprA1:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13230-4:2016/oprA1:2019
01-februar-2019
äHOH]QLãNHQDSUDYH=JRUQMLXVWURMSURJH%HWRQVNLSUDJLLQNUHWQLãNLEHWRQVNL
SUDJLGHO3UHGQDSHWLEHWRQVNLSUDJL]DNUHWQLFHLQNULåLãþD'RSROQLOR$

Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed

bearers for switches and crossings
Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4:
Spannbetonschwellen für Weichen und Kreuzungen

Applications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports

précontraints pour appareil de voie
Ta slovenski standard je istoveten z: EN 13230-4:2016/prA1
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13230-4:2016/oprA1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13230-4:2016/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN 13230-4:2016/oprA1:2019
DRAFT
EUROPEAN STANDARD
EN 13230-4:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2018
ICS 91.100.30; 93.100
English Version
Railway applications - Track - Concrete sleepers and
bearers - Part 4: Prestressed bearers for switches and
crossings

Applications ferroviaires - Voie - Traverses et supports Bahnanwendungen - Oberbau - Gleis- und

en béton - Partie 4 : Supports précontraints pour Weichenschwellen aus Beton - Teil 4:

appareil de voie Spannbetonschwellen für Weichen und Kreuzungen

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13230-4:2016. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13230-4:2016/prA1:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13230-4:2016/oprA1:2019
EN 13230-4:2016/prA1:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Modification to Annex ZA (informative), Relationship between thi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.