Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985)

Principle: Raising of the test package above a rigid plane surface and releasing it to strike this surface (the "impact surface") after a free fall. The atmospheric conditions, the height of drop and the attitude of the package are predetermined. An annex gives the predetermined attitude of the test package.

Verpackung - Versandfertige Packstücke - Vertikale Stoßprüfung (freier Fall) (ISO 2248:1985)

Emballages - Emballages d'expédition complets et pleins - Essai de choc vertical par chute libre (ISO 2248:1985)

La présente Norme internationale spécifie une méthode d'essai de choc vertical par chute libre des emballages d'expédition complets et pleins. Un tel essai peut être effectué comme essai simple dans le but d'examiner les effets d'un choc vertical, ou il peut faire partie d'une série d'essais destinés à mesurer la résistance d'un emballage dans un système de distribution qui comprend un risque de choc vertical.

Embalaža - Celovita, napolnjena transportna embalaža - Preskus s prostim padom (ISO 2248:1985)

General Information

Status
Published
Publication Date
31-Jul-1996
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Aug-1996
Due Date
01-Aug-1996
Completion Date
01-Aug-1996

Relations

Buy Standard

Standard
EN 22248:1996
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Celovita, napolnjena transportna embalaža - Preskus s prostim padom (ISO 2248:1985)Verpackung - Versandfertige Packstücke - Vertikale Stoßprüfung (freier Fall) (ISO 2248:1985)Emballages - Emballages d'expédition complets et pleins - Essai de choc vertical par chute libre (ISO 2248:1985)Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985)55.180.40Celovita, napolnjena transportna embalažaComplete, filled transport packagesICS:Ta slovenski standard je istoveten z:EN 22248:1992SIST EN 22248:1996en01-avgust-1996SIST EN 22248:1996SLOVENSKI
STANDARDSIST ISO 2248:19961DGRPHãþD



SIST EN 22248:1996



SIST EN 22248:1996



SIST EN 22248:1996



w - International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIK~YHAPO~HAR OPrAHM3AUMR l-l0 CTAHLIAPTM3AW’lM~ORGANISATlON INTERNATIONALE DE NORMALISATION Packaging - Complete, filled transport packages - Vertical impact test by dropping Emballages - Emballages d’expkdition complets et pleins - Essai de choc vertical par chute libre Second edition - 1985-12-15 UDC 621.798.1 : 620.178.153 Ref. No. ISO 22484985 (E) Descriptors : packing, transport packing, complete-and filled packages, tests, impact tests, drop tests. Price based on 3 pages SIST EN 22248:1996



Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take patt in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 2248 was prepared by Technical Committee ISO/TC 122, Packaging. This second edition cancels and replaces the first edition (ISO 2248-19721, which has been technically revised as follows: - a new clause on “Package preparation” has been added. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its Jatest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1985 Printed in Switzerland SIST EN 22248:1996



INTERNATIONAL STANDARD ISO 22484985 (E) Packaging - Complete, filled transport packages - Vertical impact test by dropping 1 Scope and field of application This International Standard specifies a method for carrying out a vertical impact test on a complete, filled transport package by dropping. lt may be performed either as a Single test to in- vestigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a package to with- stand a distribution System that includes a vertical impact hazard. 2 References ISO 2206, Packaging - Complete, filled transport packages - ldentification of Parts when testing. ISO 2233, Packaging - Complete, filled transport packages - Conditioning for testing. 3 Principle Raising of the test package above a rigid plane sur-face and releasing it to Strike this surface (the “impact surface”) after a free falll). The atmospheric conditions, the height of drop and the attitude of the package are predetermined. 4 Apparatus 4.1 Lifting arrangement, which will not darnage the test package during either lifting or release. 4.4 Impact surface, horizontal and flat, massive enough to be immovable and rigid enough to be non-deformable under test conditions. NOTE - In normal circumstances, the impact sur-face provided shall be - integral with a mass at least 50 times that of the heaviest package to be tested; - flat, such that no two Points on its sut-face differ in level by more than 2 mm; - rigid, such that it will not be deformed by more than 0,l mm when an area of 100 mm* is loaded statically with 10 kg anywhere on the surface; - sufficiently large to ensure that the test package falls entirely upon the surface. In addition, the apparatus shall meet the requirements and tolerantes of clause 7. 5 Package preparation The test package shall normally be filled with its intended con- tents. However, simulated or dummy contents may be used, on condition that the dimensions and physical proper-Ges of such contents shall be as close as possible to those of the in- tended contents. Ensure that the test package is closed normally, as if ready for distribution. If simulate
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.