SIST-TS CEN ISO/TS 19392-6:2024

Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)

This document describes a method to measure ice adhesion from artificial ice on test substrates by using a centrifuge. Basic ice types are defined and test parameters for the ice removal are described to achieve reproducibility of test results for ice adhesion measurements for rotor blade coatings. This document does not intend to provide fixed test parameter to account for the diversity of relevant icing scenarios in this field of application.

Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen - Teil 6: Bestimmung und Bewertung der Eisadhäsion mittels Zentrifuge (ISO/TS 19392-6:2023)

Dieses Dokument beschreibt ein Verfahren zum Messen der Eisadhäsion von technisch hergestelltem Eis auf Probensubstraten unter Verwendung einer Zentrifuge. Grundlegende Eistypen werden festgelegt und Prüfparameter für die Eisentfernung beschrieben, um die Vergleichbarkeit der Prüfergebnisse für die Eishaftmessung von Rotorblattbeschichtungen zu erreichen. Dieses Dokument beabsichtigt nicht, feste Prüfparameter vorzugeben, um der Vielfalt der relevanten Vereisungsszenarien in diesem Anwendungsbereich Rechnung zu tragen.

Peintures et vernis - Matériaux de revêtement pour pales de turbines éoliennes - Partie 6: Détermination et évaluation de l'adhésion de la glace à l'aide d'une centrifugeuse (ISO/TS 19392-6:2023)

Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 6. del: Ugotavljanje in vrednotenje oprijema ledu z uporabo centrifuge (ISO/TS 19392-6:2023)

Ta dokument opisuje metodo za merjenje oprijema umetnega ledu na preskusnih podlagah z uporabo centrifuge. Opredeljene so osnovne vrste ledu in opisani so preskusni parametri za odstranjevanje ledu, s čimer se doseže ponovljivost rezultatov preskusov za meritve oprijema ledu pri premazih za lopatice rotorjev. Namen tega dokumenta ni zagotovitev nespremenljivega preskusnega parametra, ki bi upošteval raznolikost zadevnih scenarijev zaledenitve na tem področju uporabe.

General Information

• Status: Published
• Public Enquiry End Date: 02-May-2024
• Publication Date: 13-Aug-2024
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Jul-2024
• Due Date: 23-Sep-2024
• Completion Date: 14-Aug-2024
• Ref Project: CEN ISO/TS 19392-6:2024 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 6. del:
Ugotavljanje in vrednotenje oprijema ledu z uporabo centrifuge (ISO/TS 19392-
6:2023)
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6:
Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)
Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen -
Teil 6: Bestimmung und Bewertung der Eisadhäsion mittels Zentrifuge (ISO/TS 19392-
6:2023)
Peintures et vernis - Matériaux de revêtement pour pales de turbines éoliennes - Partie
6: Détermination et évaluation de l'adhésion de la glace à l'aide d'une centrifugeuse
(ISO/TS 19392-6:2023)
Ta slovenski standard je istoveten z: CEN ISO/TS 19392-6:2024
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 19392-6
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
July 2024
TECHNISCHE SPEZIFIKATION
ICS 87.040
English Version
Paints and varnishes - Coating systems for wind-turbine
rotor blades - Part 6: Determination and evaluation of ice
adhesion using centrifuge (ISO/TS 19392-6:2023)
Peintures et vernis - Matériaux de revêtement pour Beschichtungsstoffe - Beschichtungssysteme für
pales de turbines éoliennes - Partie 6: Détermination et Rotorblätter von Windenergieanlagen - Teil 6:
évaluation de l'adhésion de la glace à l'aide d'une Bestimmung und Bewertung der Eisadhäsion mittels
centrifugeuse (ISO/TS 19392-6:2023) Zentrifuge (ISO/TS 19392-6:2023)
This Technical Specification (CEN/TS) was approved by CEN on 24 June 2024 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 19392-6:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO/TS 19392-6:2023 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 19392-6:2023 has been approved by CEN as CEN ISO/TS 19392-6:2024 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 19392-6
First edition
2023-02
Paints and varnishes — Coating
systems for wind-turbine rotor
blades —
Part 6:
Determination and evaluation of ice
adhesion using centrifuge
Peintures et vernis — Matériaux de revêtement pour pales de turbines
éoliennes —
Partie 6: Détermination et évaluation de l'adhésion de la glace à
l'aide d'une centrifugeuse
Reference number
ISO/TS 19392-6:2023(E)
ISO/TS 19392-6:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 19392-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Test panels .3
7.1 Substrate . 3
7.2 Preparation . 3
7.3 Conditioning. 3
7.4 Coating thickness . 3
7.5 Roughness of coating . 4
8 Procedure .4
8.1 Number of determinations . 4
8.2 Examination before exposure . . 4
8.3 Sample preparation (ice formation) . 4
8.4 Ice adhesion testing . 5
8.5 Examination after testing . 5
9 Ev a luat ion . 5
10 Precision . 6
11 Test report . 6
Annex A (informative) Example of parameters for ice formation processes .7
Bibliography . 8
iii
ISO/TS 19392-6:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
A list of all parts in the ISO 19392 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/TS 19392-6:2023(E)
Introduction
Ice accretion on rotor blade surfaces of wind turbines can decrease the efficiency and limit the
performance of wind turbines in cold, humid environments. Ice formation can also lead to damage of
the rotor blade and can be hazardous, if ice falls off the blade. Icephobic coatings (“icephobics”) can
be applied to rotor blade surfaces to reduce or prevent the adhesion of ice by re
...