SIST EN 16603-20-08:2014
(Main)Space engineering - Part 20-08: Photovoltaic assemblies and components
Space engineering - Part 20-08: Photovoltaic assemblies and components
EN 16603-20-08 specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications. This standard does not cover the particular qualification requirements for a specific mission. This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items. This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 μm and does not include thin film solar cell technologies and poly-crystaline solar cells. This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source). This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Raumfahrttechnik - Teil 20-08: Fotovoltaische Baugruppen und Komponenten
Ingéniérie spatiale - Partie 20-08: Ensembles et composants photovoltaïque
La présente Norme spécifie les exigences générales pour la qualification, l'approvisionnement, le stockage et la livraison des ensembles photovoltaïques, ensembles de cellule solaire, cellules solaires brutes, couvertures en verre et diodes de protection adaptés aux applications spatiales.
La présente Norme ne couvre pas les exigences de qualification particulières applicables à une mission spécifique.
La présente Norme s'applique principalement à l'approbation de la qualification pour les ensembles photovoltaïques, ensembles de cellule solaire, cellules solaires brutes, couvertures en verre et diodes de protection, ainsi qu'à l'approvisionnement de ces éléments.
La présente Norme est limitée aux cellules solaires en silicium cristallin et en GaAs mono-jonction et multi-jonction, avec une épaisseur supérieure à 50m ; elle ne traite pas des technologies de cellule solaire à film mince et des cellules solaires polycristallines.
La présente Norme ne traite pas des technologies de concentration, en particulier des exigences relatives aux composantes optiques d'un concentrateur (par exemple : réflecteur et lentille) et à leur vérification (par exemple : source de lumière collimatée).
La présente Norme ne s'applique pas à la qualification des sous-systèmes du générateur solaire, des panneaux solaires, de la structure et des mécanismes du générateur solaire.
La présente Norme peut être adaptée aux caractéristiques et contraintes spécifiques d'un projet spatial conformément à l'ECSS-S-ST-00.
Vesoljska tehnika - 20-08. del: Fotonapetostni sestavi in komponente
Standard EN 16603-20-08 določa splošne zahteve za ustreznost, naročanje, shranjevanje in dobavo fotonapetostnih sestavov, sestavov sončnih celic, posameznih sončnih celic, zaščitnih stekel in diod, primernih za uporabo v vesolju. Ta standard ne zajema posebnih zahtev za ustreznost za določeno misijo. Ta standard se uporablja predvsem za odobritev ustreznosti fotonapetostnih sestavov, sestavov sončnih celic, posameznih sončnih celic, zaščitnih stekel in diod ter za nabavo teh elementov. Ta standard zajema le sončne celice iz kristalnega silicija ter enojne in večspojne sončne celice GaAs debeline več kot 50 μm, ne zajema pa tehnologij sončnih celic s tankimi filmi in polikristalnih sončnih celic. Ta standard ne obravnava koncentracijske tehnologije, zlasti zahtev, povezanih z optičnimi komponentami koncentratorja (npr. reflektor in leča) in preverjanjem njihove ustreznosti (npr. kolimiran vir svetlobe). Ta standard ne velja za ustreznost podsistemov sončnih sistemov, sončne kolektorje in strukturo ter mehanizme sončnih sistemov. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-20-08:2014
01-november-2014
Vesoljska tehnika - 20-08. del: Fotonapetostni sestavi in komponente
Space engineering - Part 20-08: Photovoltaic assemblies and components
Raumfahrttechnik - Teil 20-08: Fotovoltaische Baugruppen und Komponenten
Ingéniérie spatiale - Partie 20-08: Ensembles et composants photovoltaïque
Ta slovenski standard je istoveten z: EN 16603-20-08:2014
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-20-08:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-20-08:2014
---------------------- Page: 2 ----------------------
SIST EN 16603-20-08:2014
EUROPEAN STANDARD
EN 16603-20-08
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 49.140
English version
Space engineering - Part 20-08: Photovoltaic assemblies and
components
Ingéniérie spatiale - Partie 20-08: Ensembles et Raumfahrttechnik - Teil 20-08: Fotovoltaische Baugruppen
composants photovoltaïque und Komponenten
This European Standard was approved by CEN on 10 February 2014.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 16603-20-08:2014 E
worldwide for CEN national Members and for CENELEC
Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-20-08:2014
EN 16603-20-08:2014 (E)
Table of contents
Foreword . 10
Introduction . 11
1 Scope . 12
2 Normative references . 13
3 Terms, definitions and abbreviated terms . 14
3.1 Terms from other standards . 14
3.2 Terms specific to the present standard . 14
3.3 Abbreviated terms. 19
4 General . 22
4.1 Overview . 22
4.1.1 Objective and organization . 22
4.1.2 Interfaces with other areas . 23
4.2 Physical properties . 24
4.3 Test and storage . 25
4.3.1 Test environment . 25
4.3.2 Test tolerances and accuracies . 25
4.3.3 Margins . 26
4.4 Critical materials . 26
5 Photovoltaic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.